From owner-freebsd-questions Sun Dec 10 16:44:32 1995 Return-Path: owner-questions Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id QAA07493 for questions-outgoing; Sun, 10 Dec 1995 16:44:32 -0800 (PST) Received: from owlnet.rice.edu (owlnet.rice.edu [128.42.49.7]) by freefall.freebsd.org (8.7.3/8.7.3) with ESMTP id QAA07488 for ; Sun, 10 Dec 1995 16:44:30 -0800 (PST) Received: from long-eared.owlnet.rice.edu (long-eared.owlnet.rice.edu [128.42.49.100]) by owlnet.rice.edu (8.7.1/8.7.1) with ESMTP id SAA10264 for ; Sun, 10 Dec 1995 18:44:28 -0600 (CST) From: Frederick Earl Gray Received: (from fgray@localhost) by long-eared.owlnet.rice.edu (8.7.1/8.7.1) id SAA01113 for freebsd-questions@freebsd.org; Sun, 10 Dec 1995 18:44:27 -0600 (CST) Message-Id: <199512110044.SAA01113@long-eared.owlnet.rice.edu> Subject: ATAPI CD-ROM setup To: freebsd-questions@freebsd.org Date: Sun, 10 Dec 1995 18:44:27 -0600 (CST) X-Mailer: ELM [version 2.4 PL22] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-questions@freebsd.org Precedence: bulk I have repeatedly tried to get my CD-ROM drive set up under FreeBSD without sucess. I have a Dell Dimension P90 with 16MB of RAM, a 1GB Western Digital IDE disk, and a Mitsumi IDE CD-ROM drive. I am running FreeBSD-2.2-CURRENT from Friday, December 1, but the same problem occurs with -STABLE and 2.1.0-RELEASE. My kernel configuration file contains the lines options ATAPI #Enable ATAPI support for IDE bus device wcd0 #IDE CD-ROM The drive works fine under Windows 95. The driver gives the following message: ATAPI IDE CD-ROM device driver Version V L30 (02/28/1995) Copyright (C) MITSUMI ELECTRIC CO.,LTD. 1994,1995 1 drives detected unit 0, MASTER, IRQ 15, I/O address 0x0170 However, the drive is not recognized at all under FreeBSD Can anyone suggest something? -- Fred Gray -- fgray@owlnet.rice.edu