Date: Mon, 24 Nov 2008 18:05:04 +0100 From: kenneth hatteland <kenneth.hatteland@kleppnett.no> To: freebsd-questions@freebsd.org Subject: souncard problem Message-ID: <492ADEC0.5000007@kleppnett.no>
next in thread | raw e-mail | index | archive | help
kenneth hatteland wrote: > > After switching from FreeBSD 7.0 release to stable I have had a big > > soundproblem. > > When compiling a kernel as I used to with device sound and device > > snd_emu10Kx as options I now get an error saying mixer is not configured > > etc.And no sound at all. Have tried several mixers to but to no avail, > > I do not understand the problem enough to correct it. > I'm not sure I will either, but maybe won't hurt to try? > > Googling doesn`t help as no one reports the same error with audigy > > soundcards. > > If I compile a kernel without the snd_emu10kx device sound works > > partially, sometimes playing ok, and then often sounding like an alien > > attacking ( digital noise of the horrible kind) Sooner or later the > > system locks down after playing about 5 songs with normal sound forcing > > me to hard switch the system off.. I find this extremely annoying. > I think I would also. > > Does anybody have a clue ? I am not sure which output you`d want me to > > provide for this so instead of pasting every output I know I thought to > > ask first... > > I haven`t reversed my system to 7.0 release so that could maybe fix it, > > but I was hoping to stay with 7.1 :) > Ok Kevin, here we go.....this is from a kernel with only device sound enabled ( not snd_emu10kx) [kenneth@terra ~]$ dmesg Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...3 2 2 0 0 0 done All buffers synced. Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-PRERELEASE #31: Sat Nov 22 10:18:26 CET 2008 root@terra.lyse.net:/usr/obj/usr/src/sys/TERRA Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (2335.98-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20000800<SYSCALL,LM> AMD Features2=0x1<LAHF> Cores per package: 2 usable memory = 4285456384 (4086 MB) avail memory = 4124061696 (3933 MB) ACPI APIC Table: <041807 APIC1830> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <041807 RSDT1830> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, cff00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xbc00-0xbc7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfa000000-0xfbffffff irq 16 at device 0.0 on pci1 uhci0: <UHCI (generic) USB controller> port 0xac00-0xac1f irq 16 at device 26.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xa880-0xa89f irq 21 at device 26.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf9fffc00-0xf9ffffff irq 18 at device 26.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 4 ports with 4 removable, self powered pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 pci3: <ACPI PCI bus> on pcib3 em0: <Intel(R) PRO/1000 Network Connection 6.9.5> port 0xcc00-0xcc1f mem 0xfe9e0000-0xfe9fffff,0xfe9c0000-0xfe9dffff irq 17 at device 0.0 on pci3 em0: Using MSI interrupt em0: [FILTER] em0: Ethernet address: 00:1b:21:05:11:fb pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 pci4: <ACPI PCI bus> on pcib4 atapci0: <Marvell ATA controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci4 atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 pci5: <ACPI PCI bus> on pcib5 uhci2: <UHCI (generic) USB controller> port 0xa800-0xa81f irq 23 at device 29.0 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb3: <UHCI (generic) USB controller> on uhci2 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0xa480-0xa49f irq 19 at device 29.1 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: <UHCI (generic) USB controller> on uhci3 usb4: USB revision 1.0 uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: <UHCI (generic) USB controller> port 0xa400-0xa41f irq 18 at device 29.2 on pci0 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: <UHCI (generic) USB controller> on uhci4 usb5: USB revision 1.0 uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5 uhub5: 2 ports with 2 removable, self powered uhci5: <UHCI (generic) USB controller> port 0xa080-0xa09f irq 16 at device 29.3 on pci0 uhci5: [GIANT-LOCKED] uhci5: [ITHREAD] usb6: <UHCI (generic) USB controller> on uhci5 usb6: USB revision 1.0 uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6 uhub6: 2 ports with 2 removable, self powered ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf9fff800-0xf9fffbff irq 23 at device 29.7 on pci0 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb7: EHCI version 1.0 usb7: companion controllers, 2 ports each: usb3 usb4 usb5 usb6 usb7: <EHCI (generic) USB 2.0 controller> on ehci1 usb7: USB revision 2.0 uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7 uhub7: 8 ports with 8 removable, self powered pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci6: <ACPI PCI bus> on pcib6 pci6: <multimedia, audio> at device 0.0 (no driver attached) ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xe800-0xe8ff mem 0xfebff000-0xfebfffff irq 17 at device 1.0 on pci6 ahc0: [ITHREAD] aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH9 SATA300 controller> port 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f irq 19 at device 31.2 on pci0 atapci1: [ITHREAD] ata4: <ATA channel 0> on atapci1 ata4: [ITHREAD] ata5: <ATA channel 1> on atapci1 ata5: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci2: <Intel ICH9 SATA300 controller> port 0x9000-0x9007,0x8c00-0x8c03,0x8880-0x8887,0x8800-0x8803,0x8480-0x848f,0x8400-0x840f irq 19 at device 31.5 on pci0 atapci2: [ITHREAD] ata6: <ATA channel 0> on atapci2 ata6: [ITHREAD] ata7: <ATA channel 1> on atapci2 ata7: [ITHREAD] acpi_button0: <Power Button> on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 ppbus0: [ITHREAD] plip0: <PLIP network interface> on ppbus0 plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] cpu0: <ACPI CPU> on acpi0 ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - 98, should be 8B [20070320] est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 72a072a0600072a device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ad8: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata4-master SATA150 acd0: DVDR <Optiarc DVD RW AD-7200S/1.01> at ata6-master SATA150 Waiting 5 seconds for SCSI devices to settle da1 at ahc0 bus 0 target 2 lun 0 da1: <COMPAQPC ATLAS10K2-TY184L DDC2> Fixed Direct Access SCSI-3 device da1: 80.000MB/s transfers (40.000MHz, offset 63, 16bit) da1: Command Queueing Enabled da1: 17366MB (35566000 512 byte sectors: 255H 63S/T 2213C) da2 at ahc0 bus 0 target 4 lun 0 da2: <NEC DSE2100S 0306> Fixed Direct Access SCSI-2 device da2: 3.300MB/s transfers da2: 2014MB (4124736 512 byte sectors: 255H 63S/T 256C) da0 at ahc0 bus 0 target 0 lun 0 da0: <COMPAQ BD0726536C 3B02> Fixed Direct Access SCSI-2 device da0: 80.000MB/s transfers (40.000MHz, offset 63, 16bit) da0: Command Queueing Enabled da0: 69464MB (142264000 512 byte sectors: 255H 63S/T 8855C) da3 at ahc0 bus 0 target 15 lun 0 da3: <FUJITSU MAE3091LP 0112> Fixed Direct Access SCSI-2 device da3: 80.000MB/s transfers (40.000MHz, offset 63, 16bit) da3: Command Queueing Enabled da3: 8704MB (17826240 512 byte sectors: 255H 63S/T 1109C) SMP: AP CPU #1 Launched! cd0 at ata4 bus 0 target 0 lun 0 cd0: <Optiarc DVD RW AD-7200S 1.01> Removable CD-ROM SCSI-0 device cd0: 3.300MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/da1s1a fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8 sblive0: [ITHREAD] sblive0: <SB Audigy4> port 0xec00-0xec3f irq 16 at device 0.0 on pci6 ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/22.00, addr 2> on uhub1 ums0: 8 buttons and Z dir. ukbd0: <Logitech Logitech USB Keyboard, class 0/0, rev 1.10/28.00, addr 2> on uhub0 kbd2 at ukbd0 pid 4531 (bumps), uid 1001: exited on signal 11 (core dumped) pid 6771 (bumps), uid 1001: exited on signal 11 (core dumped) [kenneth@terra ~]$ ls -l /dev/dsp* /dev/mixer lrwxr-xr-x 1 root wheel 9 Nov 22 10:50 /dev/dsp -> /dev/dsp0 lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp0 -> /dev/oss/sblive0/pcm0 lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp1 -> /dev/oss/sblive0/pcm1 lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp2 -> /dev/oss/sblive0/pcm2 lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp3 -> /dev/oss/sblive0/pcm3 lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp4 -> /dev/oss/sblive0/pcm4 lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp5 -> /dev/oss/sblive0/pcm5 lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp6 -> /dev/oss/sblive0/pcm6 lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp7 -> /dev/oss/sblive0/pcm7 lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp8 -> /dev/oss/sblive0/pcm8 lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp9 -> /dev/oss/sblive0/pcm9 lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp_ac3 -> /dev/oss/sblive0/pcm0 lrwxr-xr-x 1 root wheel 8 Nov 22 10:50 /dev/dsp_in -> /dev/dsp lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp_mmap -> /dev/oss/sblive0/pcm0 lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp_multich -> /dev/oss/sblive0/pcm9 lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp_out -> /dev/oss/sblive0/pcm0 crw-rw-rw- 1 root wheel 0, 117 Nov 22 10:50 /dev/mixer [kenneth@terra ~]$
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?492ADEC0.5000007>