Date: Sat, 4 Mar 2006 07:49:43 -0800 (PST) From: David LeCount <snailboy1@yahoo.com> To: Rod Person <rodperson@adelphia.net>, freebsd-questions@freebsd.org Subject: Re: Problems with SCSI Message-ID: <20060304154943.65923.qmail@web53705.mail.yahoo.com> In-Reply-To: <200603040841.31020.rodperson@adelphia.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Okay, now we're getting somewhere (maybe). Looking in the CMOS for firewire, I finally found the SCSI controller setting. I never would have guessed it would be under PCI configuration. Anyway, I enabled that, and I disabled firewire, both ethernet ports (I use wireless anyway), and both SATA channels. I'll have to enable one of the SATA channels later since I have a new SATA drive, but for now I want to keep it as simple as possible. Also, I have the mpt device built into my kernel, along with scbus and da. Still, FreeBSD does not list a da device, dmesg doesn't show anything about mpt, and there is no information displayed on boot about SCSI drives. It's as if the SCSI controller is still disabled, even though I enabled it and saved settings. (I went back into CMOS to verify it was still enabled.) Know any other settings that could be disabling it? Thanks. --- Rod Person <rodperson@adelphia.net> wrote: > On Friday 03 March 2006 9:58 pm, David LeCount > wrote: > > I recently purchased a Tyan S2895 motherboard and > more > > recently a Hitachi SCSI drive. I'm trying like > hell to > > I just got my new workstation 2 days ago with the > Tyan S2895 > motherboard. Mine is the K8WE with the LSI 1030 U320 > SCSI adapter built in. > To get this to boot 6.0 I had to do the following. > > In the BIOS: > > 1. Disable the SLAVE MAC(NIC). Advanced->Integrated > Devices->Slave Devices > Menu. > > 2. Disable IEEE 1394(firewire). Advanced->PCI > Configuration->Integrated 1394 > Menu. > > With my drive, which was a pull from my old > workstation, I had kernel built > that did not have the mpt drive for the LSI adapter > so during boot I choose > option 6 and the issused the command: > > load mpt > boot > > Then all booted fine. > > Although you disable the slave nic (my board has 2 > nics) the primary still > work as long as you load the if_nve kernel module. > > HTH > -- > Rod Person > > http://www.opensourcebeef.net > http://blog.opensourcebeef.net > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060304154943.65923.qmail>