Date: Wed, 26 Dec 2007 15:00:18 +0100 From: Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no> To: freebsd-amd64@freebsd.org Subject: Re: Recommended motherboard + cpu combination for AMD Socket AM2+ / Phenom? Message-ID: <20071226150018.6ed4fb5e.torfinn.ingolfsen@broadpark.no> In-Reply-To: <20071223055236.ebf95247.torfinn.ingolfsen@broadpark.no> References: <20071221022122.a4b4c7c9.torfinn.ingolfsen@broadpark.no> <20071223055236.ebf95247.torfinn.ingolfsen@broadpark.no>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 23 Dec 2007 05:52:36 +0100 Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no> wrote: > FWIW, an Asus M2A-VM HDMI motherboard and an AMD Phenom 9500 seems to > be a working combination (so far). Ok, I found a (strange) problem. If I plug in a usb keyboard after the machine is up and running, it works fine. From /var/log/messages: Dec 25 21:44:25 kg-vm root: Unknown USB device: vendor 0x046d product 0xc512 bus uhub2 Dec 25 21:44:25 kg-vm kernel: ukbd0: <Logitech USB Receiver, class 0/0, rev 1.10/30.07, addr 2> on uhub2 Dec 25 21:44:25 kg-vm kernel: kbd2 at ukbd0 Dec 25 21:44:25 kg-vm kernel: ums0: <Logitech USB Receiver, class 0/0, rev 1.10/30.07, addr 2> on uhub2 Dec 25 21:44:25 kg-vm kernel: ums0: 16 buttons and Z dir. And output from 'usbdevs -v': root@kg-vm# usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb1: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb2: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00 port 1 addr 2: low speed, power 98 mA, config 1, USB Receiver(0xc512), Logitech(0x046d), rev 30.07 port 2 powered Controller /dev/usb3: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb4: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb5: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), ATI(0x0000), rev 1.00 port 1 powered port 2 powered port 3 powered port 4 powered port 5 powered port 6 powered port 7 powered port 8 powered port 9 powered port 10 powered So far everything is good. However, if a usb keyboard is attached when FreeBSD boots, the machine panics during boot, with some message about ohci. I have tried with two different usb keyboards (different make and model) - same problem. If I try with a usb mouse instead, the machine doesn't panic during boot, it just disablesthe port that the mouse is attached to. I haven't seen this kind of error before, and doesn't know how to debug this further. any hints welcome. As always, output and info is at the machine page: http://tingox.googlepages.com/asus_m2a-vm_hdmi_freebsd -- Regards, Torfinn Ingolfsen
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20071226150018.6ed4fb5e.torfinn.ingolfsen>