Date: Mon, 10 May 2010 16:06:16 -0400 From: "Grant Peel" <gpeel@thenetnow.com> To: "Grant Peel" <gpeel@thenetnow.com>, "Robert Bonomi" <bonomi@mail.r-bonomi.com> Cc: freebsd-questions@freebsd.org Subject: Re: Live Filesystem (Fixit Console) and NFS FreeBSD8 Message-ID: <BEC7293F7F3D407BB8F4A974856292B6@GRANTPC> References: <201005092227.o49MRN65000130@mail.r-bonomi.com> <909EA60614124E94A5059A965276A1C9@GRANTLAPTOP>
next in thread | previous in thread | raw e-mail | index | archive | help
----- Original Message ----- From: "Grant Peel" <gpeel@thenetnow.com> To: "Robert Bonomi" <bonomi@mail.r-bonomi.com> Cc: <freebsd-questions@freebsd.org> Sent: Sunday, May 09, 2010 7:39 PM Subject: Re: Live Filesystem (Fixit Console) and NFS FreeBSD8 > Robert, > > Maybe I should rephrase the question: > > What would the correct procedure be to connect a machine to an NFS share > on another machine (local network, hardware already connected) with NFS > using the FreeBSD(8) Live CD (Fixit Console)? > > -Grant > > ----- Original Message ----- > From: "Robert Bonomi" <bonomi@mail.r-bonomi.com> > To: <gpeel@thenetnow.com> > Sent: Sunday, May 09, 2010 6:27 PM > Subject: Re: Live Filesystem (Fixit Console) and NFS FreeBSD8 > > >>> From owner-freebsd-questions@freebsd.org Sun May 9 15:49:35 2010 >>> From: "Grant Peel" <gpeel@thenetnow.com> >>> To: <freebsd-questions@freebsd.org> >>> Date: Sun, 9 May 2010 16:49:17 -0400 >>> Subject: Live Filesystem (Fixit Console) and NFS FreeBSD8 >>> >>> Hi all, >>> >>> I had a routine disk change that we required today, thought it would >>> take me >>> 2 hours, took close to 8. >>> >>> I am sure there is something I did'nt read, or do, if anyone can help me >>> understand I would appreciate it. >>> >>> I have several machines connected to a NFS share on a local network. >>> When I >>> put the new disk in the machine, booted it up with FreeBSD(8) Live CD, >>> went >>> to the Fixit Console, I was unable to get the machine to connect to the >>> Netowrk File Share. All other machines were still connected and >>> functioning. >>> >>> I brought up the Clinet interface with: >>> >>> ifconfig em1 inet 192.168.0.5/24 >>> >>> and was able to ping the NFS server with no problems. >>> >>> I was also able to SSH to the NFS server no problems. >>> >>> The NFS server is set to allow all hosts in the 192.168.0.0/24 network. >>> >>> Here is the command line I was using on the client: >>> >>> mount 192.168.0.4:/mnt /enterprise >>> >>> The error I got was: >>> >>> RPCPROG_NFS: RPC: Program not registered >>> >>> I tried everything I could think of to get it to work, adding >>> nfs_client_enable="YES" to a rc.conf I created in etc/, tried nfsiod -n >>> 4 >>> ... all that. I tried starting rpcbind etc etc. >>> >>> Again, any help would be appreciated, >> >> you need the portmapper running >> you need 'nfsd' >> and you need 'nfsiod' >> >> AND you need NIS (the 'yp*' stuff) running. >> >> > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > > All, The client that had the new disk installed, and the data from the failing hard disk copied over, has no problem connecting to the share now. For the record, the NFS server is running freebsd 5.2.1, and the client was using the FreeBSD 8 Live File System - Fixit console. So the question remains, should I have been able to connect to an NFS share on a local network, using the FreeBSD 8 (CD Based) live file system. If there are certain parameters I should have used, what should they have been? I have searched and searched and I can find nothing that talks about connecting to an NFS share from a client using the Live Filesystem. Again, any tips would be appreciated, -Grant
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BEC7293F7F3D407BB8F4A974856292B6>