Date: Sat, 20 Jun 2015 19:32:07 +0300 From: Phil Kulin <schors@gmail.com> To: freebsd-stable@freebsd.org Subject: camcontrol commands results in Periph destroyed on mrsas Message-ID: <CAK=u2EXSM=rngvY0EpPjcwergCPuEY=Xv3LYjp_-wF_WokjWuQ@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D200993 FreeBSD 10.1 amd64 on Dell R530 server camcontrol identify ... smartctl -a ... detach disk with message: da0 at mrsas0 bus 1 scbus1 target 0 lun 0 da0: <ATA EDGE Boost Pro P BBF0> s/n WZ141217AS1648620 detached (da0:mrsas0:1:0:0): Periph destroyed But camcontrol rescan sometimes return disk # smartctl -a /dev/da0 # camcontrol rescan 1:0:0 # camcontrol identify /dev/da0 # MegaCli -FwTermLog -Dsply -a0 =EF=BF=BD06/20/15 12:29:19: C0:EVT#02773-06/20/15 12:29:19: 113=3DUnexpecte= d sense: PD 00(e0x20/s0) Path 4433221104000000, CDB: 00 00 00 00 00 00, Sense: 1/00/1d =EF=BF=BD06/20/15 12:32:56: C0:SysDma: localAddrPlb 50e0241070, localAddr e0241070 00 00 1d 00 00 00 00 06/20/15 16:07:36: C0:EVT#02781-06/20/15 16:07:36: 113=3DUnexpected sense: PD 07(e0x20/s7) Path 4433221103000000, CDB: 1b 00 00 00 02 00, Sense: 5/24/00 # uname -a FreeBSD ********** 10.1-RELEASE-p10 FreeBSD 10.1-RELEASE-p10 #0: Wed May 13 06:54:13 UTC 2015 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 # sysctl -a | grep mrsas device mrsas da0 at mrsas0 bus 1 scbus1 target 0 lun 0 (da0:mrsas0:1:0:0): Periph destroyed da0 at mrsas0 bus 1 scbus1 target 0 lun 0 da0 at mrsas0 bus 1 scbus1 target 0 lun 0 (da0:mrsas0:1:0:0): Periph destroyed da0 at mrsas0 bus 1 scbus1 target 0 lun 0 da0 at mrsas0 bus 1 scbus1 target 0 lun 0 (da0:mrsas0:1:0:0): Periph destroyed da0 at mrsas0 bus 1 scbus1 target 0 lun 0 da7 at mrsas0 bus 1 scbus1 target 7 lun 0 hw.mfi.mrsas_enable: 1 dev.mrsas.%parent: dev.mrsas.0.%desc: LSI Invader SAS Controller dev.mrsas.0.%driver: mrsas dev.mrsas.0.%location: slot=3D0 function=3D0 dev.mrsas.0.%pnpinfo: vendor=3D0x1000 device=3D0x005d subvendor=3D0x1028 subdevice=3D0x1f49 class=3D0x010400 dev.mrsas.0.%parent: pci1 dev.mrsas.0.disable_ocr: 0 dev.mrsas.0.driver_version: 06.704.01.01-fbsd dev.mrsas.0.reset_count: 0 dev.mrsas.0.fw_outstanding: 0 dev.mrsas.0.io_cmds_highwater: 84 dev.mrsas.0.mrsas_debug: 9 dev.mrsas.0.mrsas_io_timeout: 180000 dev.mrsas.0.mrsas_fw_fault_check_delay: 1 dev.mrsas.0.reset_in_progress: 0 # MegaCli -AdpAllInfo -aAll Adapter #0 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D Versions =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Product Name : PERC H730 Mini Serial No : 4CF01GX FW Package Build: 25.2.1.0037 Mfg. Data =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Mfg. Date : 12/18/14 Rework Date : 12/18/14 Revision No : A00 Battery FRU : N/A Image Versions in Flash: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D BIOS Version : 6.18.02.0_4.16.07.00_0x06070400 Ctrl-R Version : 5.03-0010 FW Version : 4.240.00-3615 NVDATA Version : 3.1310.00-0081 Boot Block Version : 3.02.00.00-0000 Pending Images in Flash =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D None PCI Info =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Controller Id : 0000 Vendor Id : 1000 Device Id : 005d SubVendorId : 1028 SubDeviceId : 1f49 Host Interface : PCIE ChipRevision : C0 Link Speed : 3 Number of Frontend Port: 0 Device Interface : PCIE Number of Backend Port: 8 Port : Address 0 4433221100000000 1 4433221101000000 2 4433221102000000 3 4433221103000000 4 4433221104000000 5 4433221105000000 6 4433221106000000 7 4433221107000000 HW Configuration =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D SAS Address : 544a84200655a100 BBU : Present Alarm : Absent NVRAM : Present Serial Debugger : Present Memory : Present Flash : Present Memory Size : 1024MB TPM : Absent On board Expander: Absent Upgrade Key : Absent Temperature sensor for ROC : Present Temperature sensor for controller : Present ROC temperature : 33 degree Celsius Controller temperature : 33 degree Celcius Settings =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Current Time : 16:24:37 6/20, 2015 Predictive Fail Poll Interval : 300sec Interrupt Throttle Active Count : 16 Interrupt Throttle Completion : 50us Rebuild Rate : 30% PR Rate : 30% BGI Rate : 30% Check Consistency Rate : 30% Reconstruction Rate : 30% Cache Flush Interval : 4s Max Drives to Spinup at One Time : 4 Delay Among Spinup Groups : 12s Physical Drive Coercion Mode : 128MB Cluster Mode : Disabled Alarm : Disabled Auto Rebuild : Enabled Battery Warning : Enabled Ecc Bucket Size : 255 Ecc Bucket Leak Rate : 240 Minutes Restore HotSpare on Insertion : Disabled Expose Enclosure Devices : Disabled Maintain PD Fail History : Disabled Host Request Reordering : Enabled Auto Detect BackPlane Enabled : SGPIO/i2c SEP Load Balance Mode : Auto Use FDE Only : Yes Security Key Assigned : No Security Key Failed : No Security Key Not Backedup : No Default LD PowerSave Policy : Controller Defined Maximum number of direct attached drives to spin up in 1 min : 0 Auto Enhanced Import : No Any Offline VD Cache Preserved : No Allow Boot with Preserved Cache : No Disable Online Controller Reset : No PFK in NVRAM : No Use disk activity for locate : No POST delay : 90 seconds BIOS Error Handling : Pause on Errors Current Boot Mode :Normal Capabilities =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span Supported Drives : SAS, SATA Allowed Mixing: Mix in Enclosure Allowed Status =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D ECC Bucket Count : 0 Limitations =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Max Arms Per VD : 32 Max Spans Per VD : 8 Max Arrays : 128 Max Number of VDs : 64 Max Parallel Commands : 928 Max SGE Count : 60 Max Data Transfer Size : 8192 sectors Max Strips PerIO : 42 Max LD per array : 16 Min Strip Size : 64 KB Max Strip Size : 1.0 MB Max Configurable CacheCade Size: 0 GB Current Size of CacheCade : 0 GB Current Size of FW Cache : 0 MB Device Present =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Virtual Drives : 0 Degraded : 0 Offline : 0 Physical Devices : 9 Disks : 8 Critical Disks : 0 Failed Disks : 0 Supported Adapter Operations =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Rebuild Rate : Yes CC Rate : Yes BGI Rate : Yes Reconstruct Rate : Yes Patrol Read Rate : Yes Alarm Control : Yes Cluster Support : No BBU : Yes Spanning : Yes Dedicated Hot Spare : Yes Revertible Hot Spares : Yes Foreign Config Import : Yes Self Diagnostic : Yes Allow Mixed Redundancy on Array : No Global Hot Spares : Yes Deny SCSI Passthrough : No Deny SMP Passthrough : No Deny STP Passthrough : No Support Security : Yes Snapshot Enabled : No Support the OCE without adding drives : Yes Support PFK : No Support PI : Yes Support Boot Time PFK Change : No Disable Online PFK Change : No Support LDPI Type1 : No Support LDPI Type2 : Yes Support LDPI Type3 : No Support Shield State : Yes Block SSD Write Disk Cache Change: No Support Online FW Update : Yes Supported VD Operations =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Read Policy : Yes Write Policy : Yes IO Policy : Yes Access Policy : Yes Disk Cache Policy : Yes Reconstruction : Yes Deny Locate : No Deny CC : No Allow Ctrl Encryption: No Enable LDBBM : Yes Support Breakmirror : Yes Power Savings : Yes Supported PD Operations =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Force Online : Yes Force Offline : Yes Force Rebuild : Yes Deny Force Failed : No Deny Force Good/Bad : No Deny Missing Replace : No Deny Clear : No Deny Locate : No Support Temperature : Yes NCQ : No Disable Copyback : No Enable JBOD : Yes Enable Copyback on SMART : Yes Enable Copyback to SSD on SMART Error : Yes Enable SSD Patrol Read : No PR Correct Unconfigured Areas : Yes Enable Spin Down of UnConfigured Drives : No Disable Spin Down of hot spares : Yes Spin Down time : 30 T10 Power State : Yes Error Counters =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Memory Correctable Errors : 0 Memory Uncorrectable Errors : 0 Cluster Information =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Cluster Permitted : No Cluster Active : No Default Settings =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Phy Polarity : 0 Phy PolaritySplit : 0 Background Rate : 30 Strip Size : 64kB Flush Time : 4 seconds Write Policy : WB Read Policy : Adaptive Cache When BBU Bad : Disabled Cached IO : No SMART Mode : Mode 6 Alarm Disable : No Coercion Mode : 128MB ZCR Config : Unknown Dirty LED Shows Drive Activity : No BIOS Continue on Error : 1 Spin Down Mode : None Allowed Device Type : SAS/SATA Mix Allow Mix in Enclosure : Yes Allow HDD SAS/SATA Mix in VD : No Allow SSD SAS/SATA Mix in VD : No Allow HDD/SSD Mix in VD : No Allow SATA in Cluster : No Max Chained Enclosures : 4 Disable Ctrl-R : No Enable Web BIOS : No Direct PD Mapping : Yes BIOS Enumerate VDs : Yes Restore Hot Spare on Insertion : No Expose Enclosure Devices : No Maintain PD Fail History : No Disable Puncturing : No Zero Based Enclosure Enumeration : Yes PreBoot CLI Enabled : No LED Show Drive Activity : Yes Cluster Disable : Yes SAS Disable : No Auto Detect BackPlane Enable : SGPIO/i2c SEP Use FDE Only : Yes Enable Led Header : No Delay during POST : 0 EnableCrashDump : No Disable Online Controller Reset : No EnableLDBBM : Yes Un-Certified Hard Disk Drives : Allow Treat Single span R1E as R10 : Yes Max LD per array : 16 Power Saving option : Don't spin down unconfigured drives Don't spin down Hot spares Don't Auto spin down Configured Drives Power settings apply to all drives - individual PD/LD power settings cannot be set Max power savings option is not allowed for LDs. Only T10 power conditions are to be used. Cached writes are not used for spun down VDs Can schedule disable power savings at controller level Default spin down time in minutes: 30 Enable JBOD : Yes TTY Log In Flash : Yes Auto Enhanced Import : No BreakMirror RAID Support : Yes Disable Join Mirror : Yes Enable Shield State : No Time taken to detect CME : 60s Exit Code: 0x00 # camcontrol devlist -v scbus0 on mrsas0 bus 0: <> at scbus0 target -1 lun ffffffff () scbus1 on mrsas0 bus 1: <ATA EDGE Boost Pro P BBF0> at scbus1 target 0 lun 0 (da0,pass0) <ATA EDGE Boost Pro P BBF0> at scbus1 target 1 lun 0 (pass1,da1) <ATA EDGE Boost Pro P BBF0> at scbus1 target 2 lun 0 (pass2,da2) <ATA EDGE Boost Pro P BBF0> at scbus1 target 3 lun 0 (pass3,da3) <ATA EDGE Boost Pro P BBF0> at scbus1 target 4 lun 0 (pass4,da4) <ATA EDGE Boost Pro P BBF0> at scbus1 target 5 lun 0 (pass5,da5) <ATA ST2000NM0033-9ZM GA67> at scbus1 target 6 lun 0 (pass6,da6) <ATA ST2000NM0033-9ZM GA67> at scbus1 target 7 lun 0 (pass7,da7) <> at scbus1 target -1 lun ffffffff () scbus2 on ahcich0 bus 0: <> at scbus2 target -1 lun ffffffff () scbus3 on ahcich1 bus 0: <> at scbus3 target -1 lun ffffffff () scbus4 on ahcich2 bus 0: <> at scbus4 target -1 lun ffffffff () scbus5 on ahcich3 bus 0: <> at scbus5 target -1 lun ffffffff () scbus6 on ahciem0 bus 0: <AHCI SGPIO Enclosure 1.00 0001> at scbus6 target 0 lun 0 (pass8,ses0) <> at scbus6 target -1 lun ffffffff () scbus7 on ahcich4 bus 0: <> at scbus7 target -1 lun ffffffff () scbus8 on ahcich5 bus 0: <> at scbus8 target -1 lun ffffffff () scbus9 on ahcich6 bus 0: <> at scbus9 target -1 lun ffffffff () scbus10 on ahcich7 bus 0: <> at scbus10 target -1 lun ffffffff () scbus11 on ahcich8 bus 0: <> at scbus11 target -1 lun ffffffff () scbus12 on ahcich9 bus 0: <> at scbus12 target -1 lun ffffffff () scbus13 on ahciem1 bus 0: <AHCI SGPIO Enclosure 1.00 0001> at scbus13 target 0 lun 0 (pass9,ses1) <> at scbus13 target -1 lun ffffffff () scbus-1 on xpt0 bus 0: <> at scbus-1 target -1 lun ffffffff (xpt0) --=20 Non nobis Domine non nobis sed Nomini Tuo da gloriam Phil Kulin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAK=u2EXSM=rngvY0EpPjcwergCPuEY=Xv3LYjp_-wF_WokjWuQ>