Date: Wed, 30 Jan 2002 19:48:43 +0100 From: "Petr Holub" <hopet@ics.muni.cz> To: <freebsd-mobile@freebsd.org> Subject: ASUS USB floppy Message-ID: <000501c1a9be$bddf1a40$2603fb93@kloboucek>
next in thread | raw e-mail | index | archive | help
Hi all, I've an update and a question. First the update: I've put the HTML page I've sent in this list about setting up FreeBSD 4.4 on ASUS T9400 with some minor updates on the web: http://cheminfo.chemi.muni.cz/~hopet/FreeBSD/ASUS_T9400.html Now the problem: ASUS is equipped with USB floppy. When I try to work with it I get following error (serveral examples): bash-2.05a# mount -t msdos /dev/rda0 /mnt umass0: Unsupported UFI command 0x08, 6 byte command should have been converted da0: reading primary partition table: error reading fsbn 0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0 msdos: /dev/rda0: Input/output error bash-2.05a# mount -t msdos /dev/rda0c /mnt umass0: Unsupported UFI command 0x08, 6 byte command should have been converted da0: reading primary partition table: error reading fsbn 0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0 msdos: /dev/rda0c: Input/output error bash-2.05a# fdisk /dev/rda0 umass0: Unsupported UFI command 0x08, 6 byte command should have been converted da0: reading primary partition table: error reading fsbn 0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0 fdisk: can't open device /dev/rda0 fdisk: cannot open disk /dev/rda0: Input/output error Does anybody has some idea how to make it working? dmesg is bellow my signature (I've some debugging in kernel so it's chatty sometimes). BTW: I've read in man page that it should work for USB floppies VAIO computers are equipped with. Thanks! Petr ================================================================ Petr Holub CESNET z.s.p.o. Supercomputing Center Brno Zikova 2 Institute of Compt. Science 10200 Praha, CZ Masaryk University Czech Republic Botanicka 68a, 60200 Brno, CZ e-mail: Petr.Holub@cesnet.cz phone: +420-5-41512213 e-mail: hopet@ics.muni.cz Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.4-RELEASE #12: Mon Jan 28 18:18:45 CET 2002 toor@kloboucek.ics.muni.cz:/usr/src/sys/compile/KLOBOUCEK Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (701.59-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 267296768 (261032K bytes) avail memory = 256020480 (250020K bytes) Preloaded elf kernel "kernel" at 0xc0428000. netsmb_dev: loaded Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 4 entries at 0xc00f1c20 apm0: <APM BIOS> on motherboard apm: APM BIOS version 0102 apm: Code16 0xc00f0000, Data 0xc0000400 apm: Code entry 0x00006f34, Idling CPU disabled, Management enabled apm: CS_limit=0xffff, DS_limit=0xffff apm: Engaged control enabled apm: found APM BIOS v1.2, connected at v1.2 apm: Slow Idling CPU disabled Add hook "default suspend" Add hook "default resume" npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xf7800000-0xf787ffff,0xf8000000-0xfbffffff irq 11 at device 2.0 on pci0 pcib1: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0 pci1: <PCI bus> on pcib1 rl0: <RealTek 8139 10/100BaseTX> port 0xd800-0xd8ff mem 0xf7000000-0xf70000ff irq 4 at device 4.0 on pci1 rl0: Ethernet address: 00:e0:18:2c:ea:6a miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcic0: <TI PCI-4451 PCI-CardBus Bridge> irq 11 at device 7.0 on pci1 pcic0: PCI Memory allocated: 0x44000000 pcic0: TI12XX PCI Config Reg: [speaker enable][FUNC pci int + CSC serial isa irq] pccard0: <PC Card bus (classic)> on pcic0 pcic1: <TI PCI-4451 PCI-CardBus Bridge> irq 11 at device 7.1 on pci1 pcic1: PCI Memory allocated: 0x44001000 pcic1: TI12XX PCI Config Reg: [speaker enable][FUNC pci int + CSC serial isa irq] pccard1: <PC Card bus (classic)> on pcic1 fwohci0: <Texas Instruments TSB43AA99> irq 11 at device 7.2 on pci1 pcilynx0: PCI bus latency was changing to 200. fwohci0: could not map memory - trying allocation on my own fwohci0: PCI Memory allocated: ffafc000 fwohci0: Link 1394a available S400, 1 ports. fwohci: node 0x00000000 This host is NOT CYCLEMASTER Attach the probed firewire I/F to fwiso0 isab0: <PCI to ISA bridge (vendor=8086 device=244c)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 ATA100 controller> port 0xb800-0xb80f at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 9 at device 31.2 on pci0 usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on pci0 usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered umass0: MITSUMI MITSUMI USB FDD , rev 1.00/1.00, addr 2 pcm0: <Intel 82801BA (ICH2)> port 0xe100-0xe13f,0xe000-0xe0ff irq 10 at device 31.5 on pci0 pci0: <unknown card> (vendor=0x8086, dev=0x2446) at 31.6 irq 10 orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff on isa0 fdc0: direction bit not set fdc0: cmd 3 failed at out byte 1 of 3 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 BUS reset fwohci: node 0x00000000 This host is CYCLEMASTER ohci0 cable IRM = 0 ohci0 BMR = 0 IP channel assigned as 0x1f IPsec: Initialized Security Association Processing. ad0: 19077MB <TOSHIBA MK2018GAP> [38760/16/63] at ata0-master UDMA100 Mounting root from ufs:/dev/ad0s1a da0 at umass-sim0 bus 0 target 0 lun 0 da0: <MITSUMI USB FDD 1035> Removable Direct Access SCSI-0 device da0: 20KB/s transfers da0: 1MB (2880 512 byte sectors: 2H 18S/T 80C) APM ioctl: cmd = 0x20005005 called apm_event_enable() APM ioctl: cmd = 0x4040500b APM ioctl: cmd = 0xc018500d APM ioctl: cmd = 0xc018500a APM ioctl: cmd = 0xc018500a linux: syscall setup is obsoleted or not implemented (pid=276) linux: syscall setup is obsoleted or not implemented (pid=276) linux: syscall fstat64 is obsoleted or not implemented (pid=276) linux: syscall setup is obsoleted or not implemented (pid=276) umass0: Unsupported UFI command 0x08, 6 byte command should have been converted da0: reading primary partition table: error reading fsbn 0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0 umass0: Unsupported UFI command 0x08, 6 byte command should have been converted da0: reading primary partition table: error reading fsbn 0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0 umass0: Unsupported UFI command 0x08, 6 byte command should have been converted da0: reading primary partition table: error reading fsbn 0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0 umass0: Unsupported UFI command 0x08, 6 byte command should have been converted da0: reading primary partition table: error reading fsbn 0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0 umass0: Unsupported UFI command 0x08, 6 byte command should have been converted da0: reading primary partition table: error reading fsbn 0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000501c1a9be$bddf1a40$2603fb93>