From owner-freebsd-current  Tue Jul 28 09:06:35 1998
Return-Path: <owner-freebsd-current@FreeBSD.ORG>
Received: (from majordom@localhost)
          by hub.freebsd.org (8.8.8/8.8.8) id JAA08630
          for freebsd-current-outgoing; Tue, 28 Jul 1998 09:06:35 -0700 (PDT)
          (envelope-from owner-freebsd-current@FreeBSD.ORG)
Received: from is2.net.ohio-state.edu (is2.net.ohio-state.edu [128.146.48.9])
          by hub.freebsd.org (8.8.8/8.8.8) with SMTP id JAA08575
          for <freebsd-current@freebsd.org>; Tue, 28 Jul 1998 09:06:28 -0700 (PDT)
          (envelope-from maf@dev1.net.ohio-state.edu)
Received: (qmail 13089 invoked from network); 28 Jul 1998 16:05:54 -0000
Received: from dev1.net.ohio-state.edu (128.146.222.3)
  by is2.net.ohio-state.edu with SMTP; 28 Jul 1998 16:05:54 -0000
Received: (qmail 22965 invoked by uid 4454); 28 Jul 1998 16:05:53 -0000
Message-ID: <19980728120553.A22817@net.ohio-state.edu>
Date: Tue, 28 Jul 1998 12:05:53 -0400
From: Mark Fullmer <maf@net.ohio-state.edu>
To: freebsd@magnet.geophysik.tu-freiberg.de
Cc: freebsd-current@FreeBSD.ORG
Subject: Re: Answering myself, was: URGENT! ASUS P2B/LS supported ?
References: <19980728051057.A14534@net.ohio-state.edu> <199807281108.NAA00456@magnet.geophysik.tu-freiberg.de>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
X-Mailer: Mutt 0.91i
In-Reply-To: <199807281108.NAA00456@magnet.geophysik.tu-freiberg.de>; from Holm Tiffe on Tue, Jul 28, 1998 at 01:08:58PM +0200
Sender: owner-freebsd-current@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.ORG

On Tue, Jul 28, 1998 at 01:08:58PM +0200, Holm Tiffe wrote:
> > > The Machine is running fine, the AIC 7890 is supported from our
> > > CAM SCSI drivers, and the onboard Ethernet (I82558) works
> > > flawlessly whit the fxp driver. (only 10 Base T testet)
> > 
> > Do you get the following error on boot?
> > 
> > pci_map_mem failed: bad memory type=0xfffff004
> > 
> 
> No, no problems at all, where do you get this message ?
> After the initializing of the NIC or what ?

This is -stable around the 2.2.7 branch, not current.  The pci code
has changed quite a bit in -current.

chip2 <Intel 82371AB PCI-ISA bridge> rev 2 on pci0:4:0
chip3 <Intel 82371AB IDE interface> rev 1 on pci0:4:1
chip4 <Intel 82371AB USB interface> rev 1 int d irq 12 on pci0:4:2
chip5 <Intel 82371AB Power management controller> rev 2 on pci0:4:3
ahc0 <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0 int a irq 12 on pci0:6:0
pci_map_mem failed: bad memory type=0xfffff004
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 32/255 SCBs
fxp0 <Intel EtherExpress Pro 10/100B Ethernet> rev 5 int a irq 10 on pci0:7:0

--
mark

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message