Date: Sat, 17 Apr 2004 14:16:05 -0400 (EDT) From: richardcoleman@mindspring.com To: freebsd-sparc64@freebsd.org Subject: time-of-day clock problem on Netra T1 Message-ID: <20040417181605.37F785C54@neptune.criticalmagic.com>
next in thread | raw e-mail | index | archive | help
I've just installed -current from Friday morning (4/16) on a Netra T1. I'm now seeing the following error messages upon boot: eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0 eeprom0: could not allocate resources device_probe_and_attach: eeprom0 attach returned 6 warning: no time-of-day clock registered, system time will not be set accurately My kernel config is the same as GENERIC, except that I've got WITNESS, INVARIANTS, and SMP turned off. My i386 box running the same -current is not showing this problem. I'll also include `dmesg` in case that helps. Richard Coleman richardcoleman@mindspring.com Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #0: Sat Apr 17 00:30:56 EDT 2004 root@neptune.criticalmagic.com:/usr/obj/usr/src/sys/NEPTUNE_KERNEL Preloaded elf kernel "/boot/kernel/kernel" at 0xc048e000. Timecounter "tick" frequency 440024640 Hz quality 0 real memory = 536870912 (512 MB) avail memory = 505536512 (482 MB) cpu0: Sun Microsystems UltraSparc-IIi Processor (440.02 MHz CPU) random: <entropy source, Software, Yarrow> nexus0: <OpenFirmware Nexus device> pcib0: <U2P UPA-PCI bridge> on nexus0 pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A pcib0: [FAST] pcib0: [GIANT-LOCKED] pcib0: [FAST] pcib0: [GIANT-LOCKED] DVMA map: 0xc0000000 to 0xc3ffffff pci0: <OFW PCI bus> on pcib0 pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0 pci1: <OFW PCI bus> on pcib1 ebus0: revision 0x01 ebus0: <PCI-EBus2 bridge> mem 0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 1.0 on pci1 ebus0: <auxio> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 (no driver attached) ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached) ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached) ebus0: <su> addr 0x14003803f8-0x14003803ff irq 28 (no driver attached) ebus0: <su> addr 0x14003602f8-0x14003602ff irq 20 (no driver attached) ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x140030015c-0x140030015d,0x1400340278-0x1400340287 irq 34 (no driver attached) ebus0: <fdthree> addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003203f0-0x14003203f7 irq 39 (no driver attached) eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0 eeprom0: could not allocate resources device_probe_and_attach: eeprom0 attach returned 6 ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached) ebus0: <watchdog> addr 0x1400200000-0x140020003f irq 4 (no driver attached) ebus0: <display7seg> addr 0x1400200040 (no driver attached) ebus0: <beeper> addr 0x1400722000-0x1400722003 (no driver attached) ebus0: <flashprom> addr 0x1000400000-0x10005fffff (no driver attached) ebus0: <flashprom> addr 0x1000800000-0x10009fffff (no driver attached) ebus0: <i2c> addr 0x1400600000-0x1400600003 irq 40 (no driver attached) ebus0: <i2c> addr 0x1400100000-0x1400100003 irq 27 (no driver attached) ebus0: <SUNW,lom> addr 0x1400400000-0x1400400063 (no driver attached) hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff at device 1.1 on pci1 hme0: Reserved 0x8000 bytes for rid 0x10 type 3 at 0xe0000000 miibus0: <MII bus> on hme0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy1: <Generic IEEE 802.3u media interface> on miibus0 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hme0: Ethernet address: 08:00:20:d9:3f:24 hme0: [GIANT-LOCKED] sym0: <875> port 0xc00000-0xc000ff mem 0xe000a000-0xe000afff,0xe0008000-0xe00080ff at device 2.0 on pci1 sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0xe0008000 sym0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xe000a000 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym0: [GIANT-LOCKED] hme1: <Sun HME 10/100 Ethernet> mem 0xe0010000-0xe0017fff at device 3.1 on pci1 hme1: Reserved 0x8000 bytes for rid 0x10 type 3 at 0xe0010000 miibus1: <MII bus> on hme1 ukphy2: <Generic IEEE 802.3u media interface> on miibus1 ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hme1: Ethernet address: 08:00:20:d9:3f:24 hme1: [GIANT-LOCKED] pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0 pci2: <OFW PCI bus> on pcib2 pcib3: <OFW PCI-PCI bridge> at device 1.0 on pci2 pci3: <OFW PCI bus> on pcib3 atapci0: <CMD 646 WDMA2 controller> port 0x1020-0x102f,0x1018-0x101b,0x1010-0x1017,0x1008-0x100b,0x1000-0x1007 at device 14.0 on pci3 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1020 pcib3: slot 14 INTA is routed to irq 2 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1000 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0x1008 ata2: at 0x1000 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x1010 atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0x1018 ata3: at 0x1010 on atapci0 Timecounters tick every 10.000 msec acd0: CDRW <TOSHIBA CD-ROM XM-7002Bc> at ata3-master PIO4 Waiting 5 seconds for SCSI devices to settle da0 at sym0 bus 0 target 0 lun 0 da0: <SEAGATE ST318404LSUN18G 8590> Fixed Direct Access SCSI-3 device da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da0: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C) da1 at sym0 bus 0 target 1 lun 0 da1: <IBM DDYST1835SUN18G S94N> Fixed Direct Access SCSI-3 device da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da1: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C) Mounting root from ufs:/dev/da0a warning: no time-of-day clock registered, system time will not be set accurately
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040417181605.37F785C54>