From owner-freebsd-scsi Tue Nov 20 5:51:10 2001 Delivered-To: freebsd-scsi@freebsd.org Received: from polaris.we.lc.ehu.es (polaris.we.lc.ehu.es [158.227.6.43]) by hub.freebsd.org (Postfix) with ESMTP id EA73837B418 for ; Tue, 20 Nov 2001 05:50:52 -0800 (PST) Received: from v-ger.we.lc.ehu.es (v-ger [158.227.6.51]) by polaris.we.lc.ehu.es (8.11.6/8.11.6) with ESMTP id fAKDogD14704; Tue, 20 Nov 2001 14:50:43 +0100 (MET) Received: (from jose@localhost) by v-ger.we.lc.ehu.es (8.11.6/8.11.6) id fAKDobs01414; Tue, 20 Nov 2001 14:50:37 +0100 (CET) (envelope-from jose) Date: Tue, 20 Nov 2001 14:50:37 +0100 From: "Jose M. Alcaide" To: "Justin T. Gibbs" Cc: scsi@FreeBSD.ORG Subject: Re: weird problems with on-board Adaptec 7880 Message-ID: <20011120145037.A1056@v-ger.we.lc.ehu.es> References: <20011119191322.F337@v-ger.we.lc.ehu.es> <200111192208.fAJM8mY88365@aslan.scsiguy.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="5mCyUwZo2JvN/JJP" Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200111192208.fAJM8mY88365@aslan.scsiguy.com>; from gibbs@scsiguy.com on Mon, Nov 19, 2001 at 03:08:48PM -0700 X-Operating-System: FreeBSD 4.4-STABLE Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org --5mCyUwZo2JvN/JJP Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Mon, Nov 19, 2001 at 03:08:48PM -0700, Justin T. Gibbs wrote: > I don't think the syncrate problem is at all related to why the bus does > not work. The bus doesn't work because termination *on the controller* > is not set correctly. Your test with the 2940U can't detect all termination > issues. Maybe. I supposed that termination at the controller side was working. However, if termination on the controller is always on, then it should work when there are devices attached to only one of the two SCSI onboard connectors. OTOH, if termination is always off, then it should work when there are terminated device chains attached to both onboard SCSI connectors... or am I wrong? > The dump is only useful with an understanding of the corresponding > SCSI Select settings. Please go into SCSI select and set the transfer > rate from fastest to slowest across the SCSI IDs. This will provide > a better understanding of how this BIOS is setting the SEEPROM. Also > include the SCSI BIOS version for this controller. Well, I did the following tests (logs attached): narrow20.log Wide neg. disabled, 20 MB/s (all targets) narrow10.log Wide neg. disabled, 10 MB/s (all targets) narrow5.log Wide neg. disabled, 5 MB/s (all targets) wide40dlt10.log Wide neg. enabled, 40 MB/s, except tgt#5 (narrow, 10 MB/s) wide40.log Wide neg. enabled, 40 MB/s (all targets) wide40termOFF.log Like wide40, but setting term. to "High OFF/Low OFF" All tests but the last one were performed with the other termination setting: "High ON/Low Auto". Notice the "narrow5" test: all targets are set to 5 MB/s (5 MHz sync). Despite of that, the speed negotiated with the DLT unit is 10 MB/s! In all tests a simple "mt status" hangs the SCSI bus or at least the DLT unit, because the command "camcontrol reset 2" does not seem to have any effect on the DLT. Thank very much for your help, especially after it seems clear that ahc(4) is not accountable for this problem :-) Regards, JMA -- ****** Jose M. Alcaide // jose@we.lc.ehu.es // jmas@FreeBSD.org ****** ** "Beware of Programmers who carry screwdrivers" -- Leonard Brandwein ** --5mCyUwZo2JvN/JJP Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="narrow20.log" ahc2: port 0xe400-0xe4ff mem 0xe5903000-0xe5903fff irq 14 at device 20.0 on pci0 Serial EEPROM: 0xb0f6 0xb0f6 0xb0f6 0xb0f6 0x8629 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff Serial EEPROM: 0xc3d8 0xc3d8 0xc3d8 0xc3d8 0xc3d8 0xc3d8 0xc3d8 0xc3d8 0xc3d8 0xc3d8 0xc3d8 0xc3d8 0xc3d8 0xc3d8 0xc3d8 0xc3d8 0x18a6 0x1c5e 0x2807 0x10 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x9a90 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs sa0 at ahc2 bus 0 target 5 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 15) --5mCyUwZo2JvN/JJP Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="narrow10.log" ahc2: port 0xe400-0xe4ff mem 0xe5903000-0xe5903fff irq 14 at device 20.0 on pci0 Serial EEPROM: 0xb0e6 0xb0e6 0xb0e6 0xb0e6 0x8629 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff Serial EEPROM: 0xc398 0xc398 0xc398 0xc398 0xc398 0xc398 0xc398 0xc398 0xc398 0xc398 0xc398 0xc398 0xc398 0xc398 0xc398 0xc398 0x18a6 0x1c5e 0x2807 0x10 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x9690 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs sa0 at ahc2 bus 0 target 5 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 15) --5mCyUwZo2JvN/JJP Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="narrow5.log" ahc2: port 0xe400-0xe4ff mem 0xe5903000-0xe5903fff irq 14 at device 20.0 on pci0 Serial EEPROM: 0xb0e7 0xb0e7 0xb0e7 0xb0e7 0x8629 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff Serial EEPROM: 0xc39c 0xc39c 0xc39c 0xc39c 0xc39c 0xc39c 0xc39c 0xc39c 0xc39c 0xc39c 0xc39c 0xc39c 0xc39c 0xc39c 0xc39c 0xc39c 0x18a6 0x1c5e 0x2807 0x10 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x96d0 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs sa0 at ahc2 bus 0 target 5 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 15) --5mCyUwZo2JvN/JJP Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="wide40dlt10.log" ahc2: port 0xe400-0xe4ff mem 0xe5903000-0xe5903fff irq 14 at device 20.0 on pci0 Serial EEPROM: 0xb0ee 0xb0ee 0xb0ee 0xb0ee 0x8629 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff Serial EEPROM: 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc398 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0x18a6 0x1c5e 0x2807 0x10 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x989d aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs sa0 at ahc2 bus 0 target 5 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 15) --5mCyUwZo2JvN/JJP Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="wide40.log" ahc2: port 0xe400-0xe4ff mem 0xe5903000-0xe5903fff irq 14 at device 20.0 on pci0 Serial EEPROM: 0xb0ee 0xb0ee 0xb0ee 0xb0ee 0x8629 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff Serial EEPROM: 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0x18a6 0x1c5e 0x2807 0x10 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x98c0 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs sa0 at ahc2 bus 0 target 5 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: 5.813MB/s transfers (5.813MHz, offset 15) --5mCyUwZo2JvN/JJP Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="wide40termOFF.log" ahc2: port 0xe400-0xe4ff mem 0xe5903000-0xe5903fff irq 14 at device 20.0 on pci0 Serial EEPROM: 0xb0ee 0xb0ee 0xb0ee 0xb0ee 0x8629 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff 0xbfff Serial EEPROM: 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0xc3bb 0x18a6 0x1c5a 0x2807 0x10 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x98bc aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs sa0 at ahc2 bus 0 target 5 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: 5.813MB/s transfers (5.813MHz, offset 15) --5mCyUwZo2JvN/JJP-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message