Date: Thu, 9 Jul 1998 11:38:46 -0400 (EDT) From: Anirudh Modi <anirudh@bart.aero.psu.edu> To: Doug Ledford <dledford@dialnet.net> Cc: aic7xxx Mailing List <AIC7xxx@FreeBSD.ORG> Subject: Aic7xxx-5.1.0 pre2 and Ultra2 Message-ID: <Pine.LNX.3.96.980709113247.32280B-100000@bart.aero.psu.edu> In-Reply-To: <35A43379.C8B4DDFA@dialnet.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Doug, Here is the following output on my machine with your patch for aic7xxx-5.1.0 pre2. I have a dual processor Dell Precision Workstation WS410 with 2940U2W controller (complete h/w specs available at URL below): http://support.dell.com/support/system.asp?sysid=wrk_410 Here is my boot message. The kernel hangs while downloading the sequencer code. --------------------------start------------------------------------------ FDC 0 is a National Semiconductor PC87306 aic7xxx: <Adaptec AIC-7880 Ultra SCSI host adapter> at PCI 14/0 aic7xxx: Initial PCI_COMMAND value was 0x117 aic7xxx: Loading serial EEPROM...done aic7xxx: SE High byte termination Enabled aic7xxx: <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> at PCI 10/0 aic7xxx: Initial PCI_COMMAND value was 0x117 aic7xxx: Loading serial EEPROM...done aic7xxx: EEPROM is not present. aic7xxx: SE High byte termination Enabled aic7xxx: LVD Low byte termination Enabled aic7xxx: LVD High byte termination Enabled (scsi0) <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> at PCI 10/0 (scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs (scsi0) BIOS enabled, IO Port 0xfc00, IRQ 10 (scsi0) IO Memory at 0xf9fff000, MMAP Memory at 0x0 (scsi0) Resetting channel (scsi0) Downloading sequencer code... -------------------------------end------------------------------------- Hope this helps. _______________________________________________________ | | | A N I R U D H M O D I | | (currently doing M.S. in Aerospace Engg.) | | Pennsylvania State University (PSU) | | Phone : +1-814-865-1965 (Off) | | : +1-814-237-4816 (Res) | /) FAX : +1-814-865-7092 (Off) (\ / ) E-mail : anirudh-modi@psu.edu ( \ _( (| Personal Page : http://bart.aero.psu.edu |) )_ (((\ \_______________________________________________________/ /))) (\\\\ \_/ / \ \_/ ////) \ / \ / \ _/ \_ / / / \ \ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.3.96.980709113247.32280B-100000>