Date: Wed, 27 May 2015 02:59:46 -0430 From: Alberto Mijares <amijaresp@gmail.com> To: Hans Petter Selasky <hps@selasky.org> Cc: freebsd-hardware@freebsd.org Subject: Re: Bluetooth USB Host Controller Atheros Communications Message-ID: <CAGZBXN_1r3L=eWh6kVE3jXTkxRXKYLJngARgPJ0JUs2oebd7Kg@mail.gmail.com> In-Reply-To: <5564165B.30109@selasky.org> References: <CAGZBXN_M9XCT3DuPS8AMp9sA7pU9pQ=_JqayZV2wWy_NkbCLUA@mail.gmail.com> <55630A0C.50604@selasky.org> <CAGZBXN_i89djX-NAzUgqdSZb=Zf4MSAcvKJwBvJg37kOO6JP1w@mail.gmail.com> <55639DE9.4070904@selasky.org> <CAGZBXN_nmCzgp0HWuQ=NOc3m8rYQupbRsoNuzUWdoUKtC=W28Q@mail.gmail.com> <5564165B.30109@selasky.org>
next in thread | previous in thread | raw e-mail | index | archive | help
>> Since this is the first instruction in section 31.5.1 from the >> handbook, this was the first command I typed. The module is already >> loaded. >> >> However >> >> # ls /dev/ubt* >> ls: No match. >> >> Should the device be recognized? What else should I try? >> > > usbconfig show_ifdrv > % usbconfig show_ifdrv ugen0.1: <XHCI root HUB 0x8086> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) ugen0.1.0: uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen1.1.0: uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> ugen2.1: <EHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen2.1.0: uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> ugen1.2: <product 0x0024 vendor 0x8087> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen1.2.0: uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> ugen2.2: <product 0x0024 vendor 0x8087> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen2.2.0: uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> ugen1.3: <USB2.0-CRW Generic> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) ugen1.4: <Bluetooth USB Host Controller Atheros Communications> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=O
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAGZBXN_1r3L=eWh6kVE3jXTkxRXKYLJngARgPJ0JUs2oebd7Kg>