From owner-freebsd-questions Mon Mar 17 22:32:51 1997 Return-Path: Received: (from root@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id WAA07287 for questions-outgoing; Mon, 17 Mar 1997 22:32:51 -0800 (PST) Received: from gdi.uoregon.edu (gdi.uoregon.edu [128.223.170.30]) by freefall.freebsd.org (8.8.5/8.8.5) with ESMTP id WAA07282 for ; Mon, 17 Mar 1997 22:32:49 -0800 (PST) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.5/8.6.12) with SMTP id WAA01630; Mon, 17 Mar 1997 22:32:41 -0800 (PST) Date: Mon, 17 Mar 1997 22:32:41 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: Dino Farinacci cc: FreeBSD Questions Subject: Re: [raj@cisco.com: Re: 3COM Etherlink III with FreeBSD] In-Reply-To: <199703120924.BAA14312@stilton.cisco.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk On Wed, 12 Mar 1997, Dino Farinacci wrote: > Got your forwarded message. I have a 3c589c in my Dell Laptop and have > tried all sorts of incantations to get this to work to no avail. > > I continually get "zp0 not found at 0x300" (default) or > "zp0 not found at 0x110" (when I change the port I/O address to the ones > windows picks) at boot time. > > I've tried this on 2.1, 2.1.5, and 3.0. I tried both slots, nothing. > When I used 0x300, I disabled all other devices that used it and the > same irq (I even disconnected my CDROM which used 0x300/irq 10). > > When I tried 2.1.5, I even rebuilt the kernel. Nothing. > > How do I get a PCIC controller that is compatible for FreeBSD, or does > one not exist? Try the PAO package at http://www.jp.freebsd.org/PAO. That may understand your PCIC controller. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major