From owner-freebsd-hardware  Sat Mar  2 22:03:40 1996
Return-Path: owner-hardware
Received: (from root@localhost)
          by freefall.freebsd.org (8.7.3/8.7.3) id WAA16599
          for hardware-outgoing; Sat, 2 Mar 1996 22:03:40 -0800 (PST)
Received: from localhost.cdrom.com (localhost.cdrom.com [127.0.0.1])
          by freefall.freebsd.org (8.7.3/8.7.3) with SMTP id WAA16588
          Sat, 2 Mar 1996 22:03:38 -0800 (PST)
Message-Id: <199603030603.WAA16588@freefall.freebsd.org>
X-Authentication-Warning: freefall.freebsd.org: Host localhost.cdrom.com [127.0.0.1] didn't use HELO protocol
To: rv@fore.com
cc: se@ZPR.Uni-Koeln.DE (Stefan Esser), pvds@IAEhv.nl (pieter van der steen),
        hardware@freebsd.org
Subject: Re: FreeBSD doesnt see NCR 53C810 SCSI controller 
In-reply-to: Your message of "Sun, 03 Mar 1996 00:22:14 EST."
             <199603030522.AAA28524@dolphin.fore.com> 
Date: Sat, 02 Mar 1996 22:03:38 -0800
From: "Justin T. Gibbs" <gibbs@freefall.freebsd.org>
Sender: owner-hardware@freebsd.org
Precedence: bulk

>Hi:
>
>I have a similar problem. A PCI/EISA combo bus on a Dell Omniplex 466,
>houses an NCR 53C810 SCSI controller, and a 3c509 is sitting on the EISA.
>The freebsd 2.1.0 boot doesnt recognise the 3c509 sitting on the EISA bus of
>the PCI/EISA combo, though it does recognise the NCR and the SCSI disk on
>it. Any help/advice/suggestions will be appreciated.

Take the 3c509 out of EISA configuration mode and then tell the kernel
where it is via userconfig (use the '-c' boot flag).  3c509s in
EISA config mode should work (soon) in -current.

>thanks
>
>rv

--
Justin T. Gibbs
===========================================
  FreeBSD: Turning PCs into workstations
===========================================