Date: Sat, 21 May 2005 10:42:21 -0700 (PDT) From: Simeon Nifos <archwndas@yahoo.com> To: freebsd-questions@freebsd.org Subject: Interrupt storm in Compaq Presario Laptop Message-ID: <20050521174221.2903.qmail@web61122.mail.yahoo.com> In-Reply-To: <20050521120032.C98C216A533@hub.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Dear fellows, I have a Compaq presario 1230 laptop here! FreeBSD 4.11 ------------ Installs fine but: a) USB port doesn't work b) touchpad doesn't work c) /dev/psm0 cannot be found in /dev FreeBSD 5.4 and 5.3 ------------------- Installs fine but: a) USB port works fine b) touchpad doesn't work c) /dev/psm0 cannot be found in /dev d) time passes too quickly! 1 minute in FreeBSD 5.4 and 5.3 passes every 10 seconds. Below I attached the output of ls /dev more /etc/rc.conf dmesg Any ideas how can I fix those problems? Thanks in advance! This is my dev directory ------------------------ acd0 acd0t01 ad0 ad0s1 ad0s1a ad0s1b ad0s1c ad0s1d ad0s1e ad0s1f ata atkbd0 console consolectl ctty cuaa0 cuaia0 cuala0 devctl devstat fd fd0 fido geom.ctl io kbd0 klog kmem log mdctl mem net net1 net2 network nfs4 null pci ptyp0 ptyp1 ptyp2 random stderr stdin stdout sysmouse ttyd0 ttyid0 ttyld0 ttyp0 ttyp1 ttyp2 ttyv0 ttyv1 ttyv2 ttyv3 ttyv4 ttyv5 ttyv6 ttyv7 ttyv8 ttyv9 ttyva ttyvb ttyvc ttyvd ttyve ttyvf ums0 urandom usb usb0 xpt0 zero This is my /etc/rc.conf ----------------------- # -- sysinstall generated deltas -- # Sat May 21 12:34:39 2005 # Created: Sat May 21 12:34:38 2005 # Enable network daemons for user convenience. # Please make all changes to this file, not to /etc/defaults/rc.conf. # This file now contains just the overrides from /etc/defaults/rc.conf. defaultrouter="195.251.194.200" hostname="nevra.materials.uoi.gr" ifconfig_ed1="inet 195.251.194.137 netmask 255.255.255.128" linux_enable="YES" moused_enable="NO" moused_port="/dev/cuaa3" moused_type="auto" sshd_enable="YES" usbd_enable="YES" This is my dmesg ---------------- Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005 root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Cyrix GXm (24.45-MHz 586-class CPU) Origin = "CyrixInstead" Id = 0x540 DIR=0x3544 Stepping=3 Revision=5 real memory = 100663296 (96 MB) avail memory = 88838144 (84 MB) pnpbios: Bad PnP BIOS data checksum npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 5 Entries> on motherboard pci0: <PCI bus> on pcib0 cbb0: <TI1221 PCI-CardBus Bridge> at device 17.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <TI1221 PCI-CardBus Bridge> at device 17.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 isab0: <PCI-ISA bridge> port 0x5000-0x500f,0x4000-0x401f,0x3000-0x307f mem 0x40010000-0x40010fff at device 18.0 on pci0 isa0: <ISA bus> on isab0 ohci0: <OHCI (generic) USB controller> mem 0xfedfe000-0xfedfefff irq 9 at device 19.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x0e11) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <display, VGA> at device 20.0 (no driver attached) orm0: <ISA Option ROM> at iomem 0xc0000-0xc9fff on isa0 pmtimer0 on isa0 ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0 ata1 at port 0x376,0x170-0x177 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 uhub1: Atmel product 0x3311, class 9/0, rev 1.00/3.00, addr 2 uhub1: 4 ports with 4 removable, self powered Timecounter "TSC" frequency 24447264 Hz quality 800 Timecounters tick every 10.000 msec ad0: 3100MB <FUJITSU MHA2032AT/8211> [6300/16/63] at ata0-master PIO4 acd0: CDROM <TOSHIBA CD-ROM XM-1702BC/1261> at ata1-master PIO4 ed1: <PCMCIA Ethernet Card> at port 0x300-0x31f irq 9 function 0 config 32 on pccard0 ed1: Ethernet address: 00:a0:0c:12:74:2e ed1: if_start running deferred for Giant ed1: type NE2000 (16 bit) Mounting root from ufs:/dev/ad0s1a WARNING: / was not properly dismounted WARNING: /tmp was not properly dismounted WARNING: /usr was not properly dismounted /usr: mount pending error: blocks 12 files 1 WARNING: /var was not properly dismounted /var: mount pending error: blocks 8 files 2 ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 3, iclass 3/1 ums0: 5 buttons and Z dir. uhub1: illegal enable change, port 1 Discover Yahoo! Find restaurants, movies, travel and more fun for the weekend. Check it out! http://discover.yahoo.com/weekend.html
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050521174221.2903.qmail>