Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 22 Aug 2004 17:10:38 -0700 (PDT)
From:      Doug White <dwhite@gumbysoft.com>
To:        Joe Marcus Clarke <marcus@marcuscom.com>
Cc:        current@freebsd.org
Subject:   Re: Cannot install onto mpt-driven drive
Message-ID:  <20040822170955.H94593@carver.gumbysoft.com>
In-Reply-To: <20040822154204.O94593@carver.gumbysoft.com>
References:  <1093058259.9940.29.camel@shumai.marcuscom.com>  <1093195573.11223.3.camel@shumai.marcuscom.com> <20040822154204.O94593@carver.gumbysoft.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Followup to this --

My PE1750 boots and appears to operate normally with this patch. So at
least there's no regression. :-)

On Sun, 22 Aug 2004, Doug White wrote:

> On Sun, 22 Aug 2004, Joe Marcus Clarke wrote:
>
> > > > > > I just got a new Dell Precision 360 workstation with an LSILogic SCSI
> > > > > > controller:
> > > > > >
> > > > > > mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xcd00-0xcdff mem
> > > > > > 0xfe780000-0xfe79ffff,0xfe760000-0xfe77ffff irq 10 at device 3.0 on pci2
> > > > > > mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xce00-0xceff mem
> > > > > > 0xfe7x0000-0xfe7dffff,0xfe7a0000-0xfe7bffff irq 9 at device 3.1 on pci2
>
> Hm .. I have a PowerEdge 1750 here, which has the same controller, but it
> installed 5.2.1R fine:
>
> mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xbc00-0xbcff mem
> 0xfcb20000-0xfcb2ffff,0xfcb30000-0xfcb3ffff irq 18 at device 5.0 on pci4
> mpt0: [GIANT-LOCKED]
> mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xb800-0xb8ff mem
> 0xfcb00000-0xfcb0ffff,0xfcb10000-0xfcb1ffff irq 19 at device 5.1 on pci4
> mpt1: [GIANT-LOCKED]
>
> pciconf -lv info:
>
> mpt0@pci4:5:0:  class=0x010000 card=0x014a1028 chip=0x00301000 rev=0x07
> hdr=0x00
>     vendor   = 'LSI Logic (Was: Symbios Logic, NCR)'
>     device   = 'LSI53C1020/1030 PCI-X to Ultra320 SCSI Controller'
>     class    = mass storage
>     subclass = SCSI
>
>
> > No, the problem was definitely the bug I mentioned in my follow-up.  I
> > have a custom 5.2.1-RELEASE ISO that will work just fine.  If you decide
> > to upgrade beyond 5.2.1-RELEASE, you will also need to re-patch the
> > mpt(4) driver.  I'm currently running 5.3-BETA, and it works just fine.
> >
> > http://www.marcuscom.com/downloads/5.2.1-RELEASE-i386-miniinst.iso
> > http://www.marcuscom.com/downloads/mpt.diff
>
> I'll do a build pass with this patch to make sure there's no regression on
> my machine.
>
>

-- 
Doug White                    |  FreeBSD: The Power to Serve
dwhite@gumbysoft.com          |  www.FreeBSD.org



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040822170955.H94593>