Date: Sun, 15 Sep 2013 01:15:09 +0800 From: Su Kang Yin <cantona@cantona.net> To: freebsd-arm <freebsd-arm@freebsd.org> Subject: FreeBSD 10.0-ALPHA1 r255532 bootup freeze on BBB Message-ID: <CAHjFwoBcLfy%2BU9B=jLMWXGF7dMZfzTSwBak05V7qs-MNZy=h4w@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Log:
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Using DTB provided by U-Boot.
Kernel entry at 0x80200100...
Kernel args: (null)
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-ALPHA1 #0 r255532: Sat Sep 14 14:52:23 HKT 2013
cantona@freebsd:/usr/home/cantona/crochet-freebsd/work/obj/arm.armv6/usr/src.head/sys/MYBEAGLEBONE
arm
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: Cortex A8-r3 rev 2 (Cortex-A core)
Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
WB disabled EABT branch prediction enabled
LoUU:2 LoC:2 LoUIS:1
Cache level 1:
32KB/64B 4-way data cache WT WB Read-Alloc
32KB/64B 4-way instruction cache Read-Alloc
Cache level 2:
256KB/64B 8-way unified cache WT WB Read-Alloc Write-Alloc
real memory = 536870912 (512 MB)
avail memory = 517132288 (493 MB)
Texas Instruments AM3358 Processor, Revision ES1.1
random device not loaded; using insecure entropy
random: <Software, Yarrow> initialized
simplebus0: <Flattened device tree simple bus> on fdtbus0
aintc0: <TI AINTC Interrupt Controller> mem 0x48200000-0x48200fff on simplebus0
aintc0: Revision 5.0
ti_scm0: <TI Control Module> mem 0x44e10000-0x44e11fff on simplebus0
am335x_prcm0: <AM335x Power and Clock Management> mem
0x44e00000-0x44e012ff on simplebus0
am335x_prcm0: Clocks: System 24.0 MHz, CPU 550 MHz
am335x_dmtimer0: <AM335x DMTimer> mem
0x44e05000-0x44e05fff,0x44e31000-0x44e31fff,0x48040000-0x48040fff,0x48042000-0x48042fff,0x48044000-0x48044fff,0x48046000-0
Timecounter "AM335x Timecounter" frequency 24000000 Hz quality 1000
Event timer "AM335x Eventtimer0" frequency 24000000 Hz quality 1000
gpio0: <TI General Purpose I/O (GPIO)> mem
0x44e07000-0x44e07fff,0x4804c000-0x4804cfff,0x481ac000-0x481acfff,0x481ae000-0x481aefff
irq 96,97,98,99,32,33,62,63 0
gpioc0: <GPIO controller> on gpio0
gpiobus0: <GPIO bus> on gpio0
uart0: <TI UART (16550 compatible)> mem 0x44e09000-0x44e09fff irq 72
on simplebus0
uart0: console (115384,n,8,1)
ti_edma30: <TI EDMA Controller> mem
0x49000000-0x490fffff,0x49800000-0x498fffff,0x49900000-0x499fffff,0x49a00000-0x49afffff
irq 12,13,14 on simplebus0
ti_edma30: EDMA revision 40014c00
sdhci_ti0: <TI MMCHS (SDHCI 2.0)> mem 0x48060000-0x48060fff irq 64 on simplebus0
mmc0: <MMC/SD bus> on sdhci_ti0
sdhci_ti1: <TI MMCHS (SDHCI 2.0)> mem 0x481d8000-0x481d8fff irq 28 on simplebus0
mmc1: <MMC/SD bus> on sdhci_ti1
cpsw0: <3-port Switch Ethernet Subsystem> mem 0x4a100000-0x4a103fff
irq 40,41,42,43 on simplebus0
cpsw0: CPSW SS Version 1.12 (0)
cpsw0: Initial queue size TX=128 RX=384
cpsw0: Ethernet address: c8:a0:30:ac:ef:2a
miibus0: <MII bus> on cpsw0
smscphy0: <SMC LAN8710A 10/100 interface> PHY 0 on miibus0
smscphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
iichb0: <TI I2C Controller> mem 0x44e0b000-0x44e0bfff irq 70 on simplebus0
iichb0: I2C revision 4.0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
am335x_pmic0: <TI TPS65217 Power Management IC> at addr 0x24 on iicbus0
am335x_pwm0: <AM335x PWM> mem
0x48300000-0x483000ff,0x48300100-0x4830017f,0x48300180-0x483001ff,0x48300200-0x4830025f
irq 86,58 on simplebus0
am335x_pwm1: <AM335x PWM> mem
0x48302000-0x483020ff,0x48302100-0x4830217f,0x48302180-0x483021ff,0x48302200-0x4830225f
irq 87,59 on simplebus0
am335x_pwm2: <AM335x PWM> mem
0x48304000-0x483040ff,0x48304100-0x4830417f,0x48304180-0x483041ff,0x48304200-0x4830425f
irq 88,60 on simplebus0
musbotg0: <TI AM33xx integrated USB OTG controller> mem
0x47400000-0x47400fff,0x47401000-0x474012ff,0x47401300-0x474013ff,0x47401400-0x474017ff,0x47401800-0x470
musbotg0: TI AM335X USBSS v0.0.13
usbus0: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
usbus0 on musbotg0
usbus1: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
usbus1 on musbotg0
Timecounters tick every 10.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen1.1: <Mentor Graphics> at usbus1
uhub0: <Mentor Graphics OTG Root HUB, class 9/0, rev 2.00/1.00, addr
1> on usbus1
ugen0.1: <Mentor Graphics> at usbus0
uhub1: <Mentor Graphics OTG Root HUB, class 9/0, rev 2.00/1.00, addr
1> on usbus0
mmcsd0: 4GB <SDHC SA04G 1.0 SN 429690789 MFG 04/2012 by 2 TM> at mmc0
48.0MHz/4bit/65535-block
uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
^^^^^^^^^^ Stuck here.... and I didn't connect any usb device.
Any idea?
- Yin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAHjFwoBcLfy%2BU9B=jLMWXGF7dMZfzTSwBak05V7qs-MNZy=h4w>