Date: Fri, 11 Oct 2019 11:37:23 -0700 (MST) From: =?UTF-8?Q?Klaus_K=C3=BCchemann?= <maciphone2@googlemail.com> To: freebsd-arm@freebsd.org Subject: half of RAM detected Re: RockPro64 booting w/ u-boot v2019-rc3 Message-ID: <1570819043766-0.post@n6.nabble.com> In-Reply-To: <20191011125558.00bf845d71c27954d220edf0@bidouilliste.com> References: <20190916064640.GN96402@funkthat.com> <20190924221308.GX96402@funkthat.com> <D27B4CCA-3E30-4212-A973-12DB52A8FCDE@mko.io> <20190925124305.3ada7b327cf73dcb611ec074@bidouilliste.com> <1570790720416-0.post@n6.nabble.com> <20191011125558.00bf845d71c27954d220edf0@bidouilliste.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi,
--- only half of the RAM is detected( 4GB model) ----
root@:~ # sysctl hw.physmem
hw.physmem: 2121097216
--
U-Boot TPL 2019.10 (Oct 08 2019 - 07:58:06)
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2019.10 (Oct 08 2019 - 07:58:06 +0000)
Trying to boot from MMC1
--
root@:~ # uname -a
FreeBSD 13.0-CURRENT FreeBSD 13.0-CURRENT #0 r353427: Fri Oct 11 04:39:53
UTC 2
019
root@releng1.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC
arm64
----
root@:~ # dmesg
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 r353427: Fri Oct 11 04:39:53 UTC 2019
root@releng1.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC
arm6
4
FreeBSD clang version 9.0.0 (tags/RELEASE_900/final 372316) (based on LLVM
9.0.0
)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
module firmware already present!
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
Starting CPU 4 (100)
Starting CPU 5 (101)
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
arc4random: WARNING: initial seeding bypassed the cryptographic random
device be
cause it was not yet seeded and the knob 'bypass_before_seeding' was
enabled.
random: entropy device external interface
MAP 7cf1d000 mode 2 pages 1
MAP 7cf26000 mode 2 pages 1
MAP 7ff40000 mode 2 pages 16
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
clk_fixed0: <Fixed clock> on ofwbus0
simplebus0: <Flattened device tree simple bus> on ofwbus0
rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff on
ofwbus0
rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem
0xff750000-0xff75
0fff on ofwbus0
rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem
0xff760000-0xff760fff on
ofwbus0
rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77ffff on
ofwbus0
clk_fixed1: <Fixed clock> on ofwbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
regfix2: <Fixed Regulator> on ofwbus0
regfix3: <Fixed Regulator> on ofwbus0
regfix4: <Fixed Regulator> on ofwbus0
regfix5: <Fixed Regulator> on ofwbus0
regfix6: <Fixed Regulator> on ofwbus0
regfix7: <Fixed Regulator> on ofwbus0
simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff310000-0xff310fff
on
ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
gic0: <ARM Generic Interrupt Controller v3.0> mem
0xfee00000-0xfee0ffff,0xfef000
00-0xfefbffff,0xfff00000-0xfff0ffff,0xfff10000-0xfff1ffff,0xfff20000-0xfff2ffff
irq 18 on ofwbus0
its0: <ARM GIC Interrupt Translation Service> mem 0xfee20000-0xfee3ffff on
gic0
rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0
gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff irq 65 on
rk_pi
nctrl0
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff irq 66 on
rk_pi
nctrl0
gpiobus1: <OFW GPIO bus> on gpio1
gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff irq 67 on
rk_pi
nctrl0
gpiobus2: <OFW GPIO bus> on gpio2
gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff irq 68 on
rk_pi
nctrl0
gpiobus3: <OFW GPIO bus> on gpio3
gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff irq 69 on
rk_pi
nctrl0
gpiobus4: <OFW GPIO bus> on gpio4
rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on ofwbus0
iicbus0: <OFW I2C bus> on rk_i2c0
rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on ofwbus0
iicbus1: <OFW I2C bus> on rk_i2c1
rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on ofwbus0
iicbus2: <OFW I2C bus> on rk_i2c2
syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2
rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on ofwbus0
iicbus3: <OFW I2C bus> on rk_i2c3
rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 70 on iicbus2
generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
rk_usb2phy0: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
rk_usb2phy1: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpufreq_dt0: <Generic cpufreq driver> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpufreq_dt1: <Generic cpufreq driver> on cpu1
cpu2: <Open Firmware CPU> on cpulist0
cpufreq_dt2: <Generic cpufreq driver> on cpu2
cpu3: <Open Firmware CPU> on cpulist0
cpufreq_dt3: <Generic cpufreq driver> on cpu3
cpu4: <Open Firmware CPU> on cpulist0
cpufreq_dt4: <Generic cpufreq driver> on cpu4
cpu5: <Open Firmware CPU> on cpulist0
cpufreq_dt5: <Generic cpufreq driver> on cpu5
dwc0: <Rockchip Gigabit Ethernet Controller> mem 0xfe300000-0xfe30ffff irq 9
on
ofwbus0
miibus0: <MII bus> on dwc0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT-FDX, 1
000baseT-FDX-master, auto
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT-FDX, 1
000baseT-FDX-master, auto
dwc0: Ethernet address: 3e:e5:c3:24:6e:90
rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller
(RockChip)>
mem 0xfe320000-0xfe323fff irq 11 on ofwbus0
rockchip_dwmmc0: Hardware version ID is 270a
mmc0: <MMC/SD bus> on rockchip_dwmmc0
sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem 0xfe330000-0xfe33ffff
irq
12 on ofwbus0
rk_emmcphy0: got emmcclk clock
sdhci_fdt0-slot0: Hardware doesn't specify timeout clock frequency, setting
BROK
EN_TIMEOUT quirk.
sdhci_fdt0: 1 slot(s) allocated
mmc1: <MMC/SD bus> on sdhci_fdt0
ehci0: <Generic EHCI Controller> mem 0xfe380000-0xfe39ffff irq 13 on ofwbus0
usbus0: EHCI version 1.0
usbus0 on ehci0
ohci0: <Generic OHCI Controller> mem 0xfe3a0000-0xfe3bffff irq 14 on ofwbus0
usbus1 on ohci0
ehci1: <Generic EHCI Controller> mem 0xfe3c0000-0xfe3dffff irq 15 on ofwbus0
usbus2: EHCI version 1.0
usbus2 on ehci1
ohci1: <Generic OHCI Controller> mem 0xfe3e0000-0xfe3fffff irq 16 on ofwbus0
usbus3 on ohci1
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
uart0: <16750 or compatible> mem 0xff180000-0xff1800ff irq 26 on ofwbus0
uart1: <16750 or compatible> mem 0xff1a0000-0xff1a00ff irq 28 on ofwbus0
uart1: console (1500000,n,8,1)
syscon_generic0: <syscon> mem 0xffa58000-0xffa5801f on ofwbus0
syscon_generic1: <syscon> mem 0xffa5c000-0xffa5c01f on ofwbus0
syscon_generic2: <syscon> mem 0xffa60080-0xffa6009f on ofwbus0
syscon_generic3: <syscon> mem 0xffa60100-0xffa6011f on ofwbus0
syscon_generic4: <syscon> mem 0xffa60180-0xffa6019f on ofwbus0
syscon_generic5: <syscon> mem 0xffa70000-0xffa7001f on ofwbus0
syscon_generic6: <syscon> mem 0xffa70080-0xffa7009f on ofwbus0
syscon_generic7: <syscon> mem 0xffa74000-0xffa7401f on ofwbus0
syscon_generic8: <syscon> mem 0xffa76000-0xffa7601f on ofwbus0
syscon_generic9: <syscon> mem 0xffa90000-0xffa9001f on ofwbus0
syscon_generic10: <syscon> mem 0xffa98000-0xffa9801f on ofwbus0
syscon_generic11: <syscon> mem 0xffaa0000-0xffaa001f on ofwbus0
syscon_generic12: <syscon> mem 0xffaa0080-0xffaa009f on ofwbus0
syscon_generic13: <syscon> mem 0xffaa8000-0xffaa801f on ofwbus0
syscon_generic14: <syscon> mem 0xffaa8080-0xffaa809f on ofwbus0
syscon_generic15: <syscon> mem 0xffab0000-0xffab001f on ofwbus0
syscon_generic16: <syscon> mem 0xffab0080-0xffab009f on ofwbus0
syscon_generic17: <syscon> mem 0xffab8000-0xffab801f on ofwbus0
syscon_generic18: <syscon> mem 0xffac0000-0xffac001f on ofwbus0
syscon_generic19: <syscon> mem 0xffac0080-0xffac009f on ofwbus0
syscon_generic20: <syscon> mem 0xffac8000-0xffac801f on ofwbus0
syscon_generic21: <syscon> mem 0xffac8080-0xffac809f on ofwbus0
syscon_generic22: <syscon> mem 0xffad0000-0xffad001f on ofwbus0
syscon_generic23: <syscon> mem 0xffad8080-0xffad809f on ofwbus0
syscon_generic24: <syscon> mem 0xffae0000-0xffae001f on ofwbus0
syscon_generic25: <syscon> mem 0xff330000-0xff33e3d3 on ofwbus0
iicbus2: <unknown card> at addr 0x82
iic2: <I2C generic I/O> on iicbus2
iicbus3: <unknown card> at addr 0x44
iic3: <I2C generic I/O> on iicbus3
syscon_generic26: <syscon> mem 0xff620000-0xff6200ff on ofwbus0
gpioc0: <GPIO controller> on gpio0
gpioc1: <GPIO controller> on gpio1
gpioc2: <GPIO controller> on gpio2
gpioc3: <GPIO controller> on gpio3
gpioc4: <GPIO controller> on gpio4
gpioled0: <GPIO LEDs> on ofwbus0
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
ugen1.1: <Generic OHCI root HUB> at usbus1
uhub0 on usbus1
uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <Generic EHCI root HUB> at usbus0
uhub1 on usbus0
uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen3.1: <Generic OHCI root HUB> at usbus3
uhub2 on usbus3
uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <Generic EHCI root HUB> at usbus2
uhub3 on usbus2
uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
mmcsd0: 128GB <SDHC SN128 8.0 SN 1C4A96F7 MFG 08/2019 by 3 SD> at mmc0
50.0MHz/4
bit/256-block
mmc1: No compatible cards found on bus
Release APs...done
CPU 0: ARM Cortex-A53 r0p4 affinity: 0 0
Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
Instruction Set Attributes 1 = <>
Processor Features 0 = <GIC,AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0
32>
Processor Features 1 = <0>
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
Memory Model Features 0 = <4k Granule,64k Granule,S/NS
Mem,MixedEndian,16b
it ASID,1TB PA>
Memory Model Features 1 = <>
Memory Model Features 2 = <32b CCIDX,48b VA>
GEOM: mmcsd0: the secondary GPT header is not in the last LBA.
Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6
Breakpoints,P
MUv3,Debug v8>
Debug Features 1 = <0>
Auxiliary Features 0 = <0>
Auxiliary Features 1 = <0>
CPU 1: ARM Cortex-A53 r0p4 affinity: 0 1
Memory Model Features 0 = <4k Granule,64k Granule,S/NS
Mem,MixedEndian,16b
it ASID,1TB PA>
CPU 2: ARM Cortex-A53 r0p4 affinity: 0 2
Memory Model Features 0 = <4k Granule,64k Granule,S/NS
Mem,MixedEndian,16b
it ASID,1TB PA>
CPU 3: ARM Cortex-A53 r0p4 affinity: 0 3
Memory Model Features 0 = <4k Granule,64k Granule,S/NS
Mem,MixedEndian,16b
it ASID,1TB PA>
CPU 4: ARM Cortex-A72 r0p2 affinity: 1 0
Memory Model Features 0 = <4k Granule,64k Granule,S/NS
Mem,MixedEndian,16b
it ASID,16TB PA>
CPU 5: ARM Cortex-A72 r0p2 affinity: 1 1
Memory Model Features 0 = <4k Granule,64k Granule,S/NS
Mem,MixedEndian,16b
it ASID,16TB PA>
WARNING: WITNESS option enabled, expect reduced performance.
GEOM: diskid/DISK-1C4A96F7: the secondary GPT header is not in the last LBA.
Warning: no time-of-day clock registered, system time will not be set
accurately
uhub2: 1 port with 1 removable, self powered
uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
uhub3: 1 port with 1 removable, self powered
GEOM: diskid/DISK-1C4A96F7: the secondary GPT header is not in the last LBA.
random: unblocking device.
lo0: link state changed to UP
--
Regards
Klaus
--
Sent from: http://freebsd.1045724.x6.nabble.com/freebsd-arm-f4199244.html
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1570819043766-0.post>