Date: Fri, 7 Apr 2006 23:02:06 -0600 From: Chris Jones <cdjones-freebsd-amd64@novusordo.net> To: freebsd-amd64@freebsd.org Subject: Re: amd64/94989: BTX Halts on Sun Fire X2100 w/6.1-BETA4 (amd64) and 5.4-RELEASE (x86) Message-ID: <AD101A0E-0B1B-4C35-8A06-AAF04DCBCA5F@novusordo.net> In-Reply-To: <67611F0F-D849-46A8-BFBB-C1BE54C5F46E@novusordo.net> References: <67611F0F-D849-46A8-BFBB-C1BE54C5F46E@novusordo.net>
next in thread | previous in thread | raw e-mail | index | archive | help
--Apple-Mail-3-809085739
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
charset=US-ASCII;
delsp=yes;
format=flowed
On 28-Mar-06, at 2:43 AM, Chris Jones wrote:
[... Sun Fire X2100 won't boot under FreeBSD etc.]
Further update for the archives:
FreeBSD 6.1-BETA4 is quite happy to do PXE booting and installation,
and boots from the hard drive (dmesg attached). Sadly, even with the
most recent BIOS (v. 1.09), booting from CD fails with the BTX halt.
With that said, that's perfectly adequate for my purposes. Now, to
burn it in and try it out....
Cheers,
Chris
--Apple-Mail-3-809085739
Content-Transfer-Encoding: 7bit
Content-Type: application/octet-stream; x-unix-mode=0644; name="x2100.dmesg"
Content-Disposition: attachment;
filename=x2100.dmesg
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-BETA4 #0: Mon Mar 13 19:16:58 UTC 2006
root@x64.samsco.home:/usr/obj/usr/src/sys/SMP
ACPI APIC Table: <SUNW AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 146 (2010.31-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20f71 Stepping = 1
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
real memory = 1072562176 (1022 MB)
avail memory = 1023680512 (976 MB)
ioapic0 <Version 1.1> irqs 0-23 on motherboard
acpi0: <SUNW AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
unknown: I/O range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfeb00000-0xfeb000ff irq 22 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
umass0: LaCie LaCie DVDRW USB, rev 2.00/0.00, addr 2
atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe800-0xe80f at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce CK804 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd400-0xd40f mem 0xfe02c000-0xfe02cfff irq 23 at device 7.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce CK804 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc000-0xc00f mem 0xfe02b000-0xfe02bfff irq 21 at device 8.0 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0xbc00-0xbc07 mem 0xfe02a000-0xfe02afff irq 22 at device 10.0 on pci0
nve0: Ethernet address 00:e0:81:5a:1b:76
miibus0: <MII bus> on nve0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nve0: Ethernet address: 00:e0:81:5a:1b:76
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
bge0: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem 0xfdaf0000-0xfdafffff irq 19 at device 0.0 on pci4
miibus1: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:e0:81:5a:1b:77
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci5: <ACPI PCI bus> on pcib5
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xca000-0xcb7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_attach: atkbd0 attach returned 6
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: Darfon USB Combo Keyboard, rev 1.10/2.02, addr 2, iclass 3/1
kbd0 at ukbd0
uhid0: Darfon USB Combo Keyboard, rev 1.10/2.02, addr 2, iclass 3/1
Timecounter "TSC" frequency 2010312422 Hz quality 800
Timecounters tick every 1.000 msec
module_register_init: MOD_LOAD (amr_linux, 0xffffffff805fae00, 0) error 6
ad4: 239372MB <Maxtor 6V250F0 VA111630> at ata2-master SATA300
ad6: 239372MB <Maxtor 6V250F0 VA111630> at ata3-master SATA300
ar0: 239372MB <nVidia MediaShield RAID1> status: READY
ar0: disk0 READY (master) using ad4 at ata2-master
ar0: disk1 READY (mirror) using ad6 at ata3-master
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <TOSHIBA CD/DVDW SDR6572M TU04> Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Incompatible medium installed
Trying to mount root from ufs:/dev/ad4s1a
--Apple-Mail-3-809085739--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AD101A0E-0B1B-4C35-8A06-AAF04DCBCA5F>