Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 04 Feb 2004 11:23:25 +0100
From:      Mattias Schlenker <mattias@schlenker-webdesign.de>
To:        freebsd-current@freebsd.org
Subject:   5.2.1 RC1 audio trouble 
Message-ID:  <4020C81D.50803@schlenker-webdesign.de>

next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------010001040508070009060502
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit

I still use an old Fujitsu Lifebook B142 which has an ESS ES1946S sound 
chip. In 4.7 and 5.1 sound worked without any problems after putting

snd_pcm_load="YES"

to my loader.conf. However 5.2, 5.2.1 and 5.2-CURRENT do not recognize 
the sound card anymore, I just get the message

pci0: <multimedia, audio> at device 13.0 (no driver attached)

The complete output of dmesg is attached.

Thanks,
Mattias

-- 
 Mattias Schlenker  / Tel 0851 9441369 oder 0160 7352988
 Freyunger Str. 42 / http://ilw.schlenker-webdesign.de/
 94034 Passau     / http://mattlog.schlenker-webdesign.de/


--------------010001040508070009060502
Content-Type: text/plain;
 name="dmesg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.txt"

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RC #0: Mon Feb  2 22:03:20 CET 2004
    mattias@uran.wg-net:/usr/obj/usr/src/sys/MATTIASB142
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0835000.
Preloaded elf module "/boot/kernel/snd_ess.ko" at 0xc08351f4.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc08352a0.
Preloaded elf module "/boot/kernel/snd_sbc.ko" at 0xc083534c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08353f8.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (300.68-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x66a  Stepping = 10
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 167690240 (159 MB)
avail memory = 153260032 (146 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <FUJ    TWEED   > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00fdf60
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xff08-0xff0b on acpi0
acpi_cpu0: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 7 INTD is routed to irq 9
pcib0: slot 13 INTA is routed to irq 9
pcib0: slot 16 INTA is routed to irq 9
pcib0: slot 19 INTA is routed to irq 9
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xf4f0-0xf4ff at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82443MX USB controller> port 0xf4c0-0xf4df irq 9 at device 7.2 on pci0
usb0: <Intel 82443MX USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pci0: <multimedia, audio> at device 13.0 (no driver attached)
pci0: <simple comms> at device 16.0 (no driver attached)
cbb0: <RF5C475 PCI-CardBus Bridge> irq 9 at device 19.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
pci0: <display, VGA> at device 20.0 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x118-0x11f,0x2e8-0x2ef irq 3 drq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 300682805 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ed1: <NETGEAR FA411> at port 0x300-0x31f irq 9 function 0 config 7 on pccard0
ed1: address 00:09:5b:1b:b3:22, type AX88190 (16 bit) 
GEOM: create disk ad0 dp=0xc2392c60
ad0: 4126MB <FUJITSU MHF2043AT> [8944/15/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s2a

--------------010001040508070009060502--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4020C81D.50803>