Date: Sat, 27 Apr 1996 17:49:58 -0500 (CDT) From: peter@taronga.com (Peter da Silva) To: scsi@freebsd.org Subject: Adaptec 1542, Adaptec 1742, Bustek 747, Archive Viper, Help? Message-ID: <199604272249.RAA01804@bonkers.taronga.com>
next in thread | raw e-mail | index | archive | help
OK, I've got on hand:
1 (one) Bustek 747.
1 (one) Adaptec 1540B.
1 (one) Adaptec 1742A.
1 (one) Archive Viper.
I don't have a SCSI cable with enough connectors to put the Viper on the
747.
When I have it on the 1540B, I get fatal write errors halfway through the
tape. About halfway. It's not predictable. (already posted about this)
I've tried multiple tapes. Same results, but in different places. The tapes
can't *all* be bad. I got the drive and tapes from CSC.
When I try to install the 1742 as a second controller, it interferes with
the 747. No matter what EISA config I set, if the 1742 is enabled the Bustek
BIOS tried to drive it as a Bustek. I don't understand EISA config that
well, so I could simply be thick.
Help? I'll be happy to supply any and all details.
FreeBSD 2.0.5-RELEASE #0: Sat Apr 27 10:26:49 CDT 1996
peter@bonkers.taronga.com:/usr/src/sys/compile/BONK
CPU: i486 DX2 (486-class CPU)
Origin = "GenuineIntel" Id = 0x435 Stepping=5
Features=0x3<FPU,VME>
real memory = 16384000 (4000 pages)
avail memory = 14917632 (3642 pages)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16450
sio2 at 0x3e8-0x3ef irq 5 on isa
sio2: type 16550A
sio3 at 0x2e8-0x2ef irq 9 on isa
sio3: type 16550A
sio4 at 0x2a0-0x2a7 flags 0x705 on isa
sio4: type 16550A (multiport)
sio5 at 0x2a8-0x2af flags 0x705 on isa
sio5: type 16550A (multiport)
sio6 at 0x2b0-0x2b7 flags 0x705 on isa
sio6: type 16550A (multiport)
sio7 at 0x2b8-0x2bf irq 10 flags 0x705 on isa
sio7: type 16550A (multiport master)
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
fd1: 1.2MB 5.25in
bt0: Bt747 / 0-PCI/EISA/VLB(32bit) bus
bt0: reading board settings, busmastering, int=12
bt0: version 3.37, fast sync, parity, 32 mbxs, 32 ccbs
bt0: targ 0 sync rate= 5.00MB/s(200ns), offset=15
bt0: targ 1 sync rate= 5.00MB/s(200ns), offset=15
bt0: targ 6 sync rate= 4.54MB/s(220ns), offset=15
bt0: Enabling Round robin scheme
bt0 at 0x330 irq 12 on isa
bt0 waiting for scsi devices to settle
(bt0:0:0): "FUJITSU M2684S-512 2039" type 0 fixed SCSI 2
sd0(bt0:0:0): Direct-Access 507MB (1039329 512 byte sectors)
(bt0:1:0): "QUANTUM PD1800S 3162" type 0 fixed SCSI 2
sd1(bt0:1:0): Direct-Access 1717MB (3517856 512 byte sectors)
(bt0:6:0): "TOSHIBA CD-ROM XM-3401TA 2873" type 5 removable SCSI 2
cd0(bt0:6:0): CD-ROM cd present.[41150 x 2048 byte records]
ahb0 not found
aha0 at 0x334-0x337 irq 15 drq 7 on isa
aha0 waiting for scsi devices to settle
(aha0:5:0): "ARCHIVE ANCDA 2750 28077 -003" type 1 removable SCSI 2
st0(aha0:5:0): Sequential-Access density code 0x0, drive empty
npx0 on motherboard
npx0: INT 16 interface
sb0 at 0x220 irq 3 drq 1 on isa
sb0: <SoundBlaster 2.2>
opl0 at 0x388 on isa
opl0: <Yamaha 2-OP FM>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199604272249.RAA01804>