Date: Tue, 21 Nov 2006 16:34:53 +0200 From: "George Kontostanos" <gkontos.mail@gmail.com> To: freebsd-hardware@freebsd.org Subject: Sound Problem or IRQ mixup? Message-ID: <f4775d410611210634n323dcef2mce76c15e3a13e074@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hello everybody,
I have a problem with my soundcard detection. The system is running on a
ASUS P5B mobo on an Intel Core2Duo Processor at 2.4G with 2 Gigs of Ram.
Here is some interesting stuff:
uname -a
FreeBSD core2duo.aicom.loc 6.2-RC1 FreeBSD 6.2-RC1 #0: Sat Nov 18 18:39:56
EET 2006 root@core2duo.aicom.loc:/usr/obj/usr/src/sys/CORE2DUO i386
Kernel is Generic with IPV6 removed
dmesg
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RC1 #0: Sat Nov 18 18:39:56 EET 2006
root@core2duo.aicom.loc:/usr/obj/usr/src/sys/CORE2DUO
ACPI APIC Table: <A M I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (2394.43-MHz 686-class
CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2147090432 (2047 MB)
avail memory = 2091773952 (1994 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A M I OEMRSDT> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce 7300 GT> port 0x8c00-0x8c7f mem
0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq 16 at
device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
uhci0: <UHCI (generic) USB controller> port 0xdc00-0xdc1f irq 16 at device
26.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 17 at device
26.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq 18
at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
usb2: waiting for BIOS to give up control
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168B/8111B PCIe Gigabit Ethernet> port 0xa800-0xa8ff mem
0xfe9ff000-0xfe9fffff irq 19 at device 0.0 on pci3
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
re0: Ethernet address: 00:18:f3:03:66:7e
re0: [FAST]
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib4
atapci0: <JMicron JMB363 SATA300 controller> port
0x9c00-0x9c07,0x9880-0x9883,0x9800-0x9807,0x9480-0x9483,0x9400-0x940f mem
0xfe8fe000-0xfe8fffff irq 16 at device 0.0 on pci2
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
ata4: <ATA channel 2> on atapci0
uhci2: <UHCI (generic) USB controller> port 0xd480-0xd49f irq 23 at device
29.0 on pci0
uhci2: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 19 at device
29.1 on pci0
uhci3: [GIANT-LOCKED]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 18 at device
29.2 on pci0
uhci4: [GIANT-LOCKED]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfebff800-0xfebffbff irq 23
at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
usb6: waiting for BIOS to give up control
usb6: timed out waiting for BIOS
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci1
usb6: USB revision 2.0
uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
umass0: HLDS Inc. Super Multi DVD Rewriter, rev 2.00/0.01, addr 2
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xbc00-0xbc7f mem
0xfeaffc00-0xfeaffc7f irq 22 at device 1.0 on pci5
miibus1: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus1
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:01:02:11:f3:94
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH8 SATA300 controller> port
0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f,0xe080-0xe08f
irq 19 at device 31.2 on pci0
ata5: <ATA channel 0> on atapci1
ata6: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH8 SATA300 controller> port
0xd400-0xd407,0xd080-0xd083,0xd000-0xd007,0xcc00-0xcc03,0xc880-0xc88f,0xc800-0xc80f
irq 19 at device 31.5 on pci0
ata7: <ATA channel 0> on atapci2
ata8: <ATA channel 1> on atapci2
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3
on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ulpt0: Hewlett-Packard OfficeJet 6100 Series, rev 2.00/1.00, addr 2, iclass
255/204
ulpt0: using bi-directional mode
Timecounters tick every 1.000 msec
acd0: DVDROM <ASUS DVD-E616A2/1.03> at ata4-master UDMA100
ad10: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata5-master SATA150
SMP: AP CPU #1 Launched!
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVDRRW GSA-2166D 1.01> Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad10s3a
pid 1507 (gnome-screensaver), uid 1001: exited on signal 6
vmstat -i
interrupt total rate
irq1: atkbd0 2699 1
irq6: fdc0 10 0
irq12: psm0 134828 60
irq16: nvidia0++ 138086 61
irq19: re0 uhci3++ 13022 5
irq22: xl0 3426 1
irq23: uhci2 ehci1 84 0
cpu0: timer 4333224 1936
cpu1: timer 4325208 1932
Total 8950587 3999
* pciconf -lv
*hostb0@pci0:0:0: class=0x060000 card=0x81ea1043 chip=0x29a08086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000088 chip=0x29a18086 rev=0x02
hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
uhci0@pci0:26:0: class=0x0c0300 card=0x81ec1043 chip=0x28348086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
uhci1@pci0:26:1: class=0x0c0300 card=0x81ec1043 chip=0x28358086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
ehci0@pci0:26:7: class=0x0c0320 card=0x81ec1043 chip=0x283a8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
none0@pci0:27:0: class=0x040300 card=0x81ec1043 chip=0x284b8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = multimedia
pcib2@pci0:28:0: class=0x060400 card=0x00000040 chip=0x283f8086
rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pcib3@pci0:28:3: class=0x060400 card=0x00000040 chip=0x28458086
rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pcib4@pci0:28:4: class=0x060400 card=0x00000040 chip=0x28478086
rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
uhci2@pci0:29:0: class=0x0c0300 card=0x81ec1043 chip=0x28308086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
uhci3@pci0:29:1: class=0x0c0300 card=0x81ec1043 chip=0x28318086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
uhci4@pci0:29:2: class=0x0c0300 card=0x81ec1043 chip=0x28328086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
ehci1@pci0:29:7: class=0x0c0320 card=0x81ec1043 chip=0x28368086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
pcib5@pci0:30:0: class=0x060401 card=0x00000050 chip=0x244e8086
rev=0xf2 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6), 6300ESB Hub
Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:31:0: class=0x060100 card=0x81ec1043 chip=0x28108086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-ISA
atapci1@pci0:31:2: class=0x01018f card=0x81ec1043 chip=0x28208086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = mass storage
subclass = ATA
none1@pci0:31:3: class=0x0c0500 card=0x81ec1043 chip=0x283e8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = SMBus
atapci2@pci0:31:5: class=0x010185 card=0x81ec1043 chip=0x28258086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = mass storage
subclass = ATA
nvidia0@pci1:0:0: class=0x030000 card=0x00000000 chip=0x039310de
rev=0xa1 hdr=0x00
vendor = 'NVIDIA Corporation'
class = display
subclass = VGA
re0@pci3:0:0: class=0x020000 card=0x81681043 chip=0x816810ec rev=0x01
hdr=0x00
vendor = 'Realtek Semiconductor'
class = network
subclass = ethernet
atapci0@pci2:0:0: class=0x010185 card=0x81e41043 chip=0x2363197b
rev=0x02 hdr=0x00
class = mass storage
subclass = ATA
xl0@pci5:1:0: class=0x020000 card=0x905510b7 chip=0x905510b7 rev=0x24
hdr=0x00
vendor = '3COM Corp, Networking Division'
device = '3C905B-TX Fast Etherlink 10/100 PCI TX NIC'
class = network
subclass = ethernet
*
*#kldload snd_driver*
*#cat /dev/sndstat
FreeBSD Audio Driver (newpcm)
Installed devices:
Any help will be appreciated thanks.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?f4775d410611210634n323dcef2mce76c15e3a13e074>