Date: Mon, 10 Nov 2003 15:06:01 -0400 From: David Bremner <bremner@unb.ca> To: FreeBSD-gnats-submit@FreeBSD.org Subject: i386/59147: USB active extension cable not recognized Message-ID: <E1AJHMP-000N3V-4b@fcstest240b.cs.unb.ca> Resent-Message-ID: <200311101910.hAAJAEDJ056432@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 59147 >Category: i386 >Synopsis: USB active extension cable not recognized >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Mon Nov 10 11:10:13 PST 2003 >Closed-Date: >Last-Modified: >Originator: David Bremner >Release: FreeBSD 5.1-CURRENT i386 >Organization: University of New Brunswick >Environment: System: FreeBSD fcstest240b.cs.unb.ca 5.1-CURRENT FreeBSD 5.1-CURRENT #1: Mon Nov 10 13:53:20 AST 2003 bremner@fcstest240b.cs.unb.ca:/usr/obj/usr/src/sys/CONVEX2 i386 I am running a stock 5.1R GENERIC kernel config, plus ehci device. It did not work before I added the ehci device either. >Description: My lexmark optra 323 is not recognized when connected via a StarTech USB Active Extension cable (USB FAAEXT15A) by 5.1R or 5.1-CURRENT (as above). The only (I think) related kernel messages that I see are from ehci debugging ehci_pcd: change=0x40 ehci after reset, status=0x00001803 ehci_disown: index=6 lowspeed=0 The printer works when connected directly. >How-To-Repeat: Plug in extension cable to CPU with printer attached, or plug in printer to extension cable. >Fix: Well, it used to work under 4.9pre. So that is a (theoretical) fix. Also, obviously, move the printer closer and don't use the extension cable. I'm only reporting so the next poor sod does not upgrade to current just to see if it works before it occurs to try the printer without the extension cable :-) >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1AJHMP-000N3V-4b>