Date: Thu, 5 Jan 2006 01:04:52 -0200 From: =?ISO-8859-1?Q?Lu=EDs_Cargnini?= <lvcargnini@gmail.com> To: romad@gmx.de Cc: freebsd-hardware@freebsd.org Subject: Re: Dlink DWL-G520+ Message-ID: <ae36f8040601041904r3f21c4d7r@mail.gmail.com> In-Reply-To: <1136141981.675.30.camel@urka.gonduras.ru> References: <ae36f8040512281856v55ca67ffx@mail.gmail.com> <1136141981.675.30.camel@urka.gonduras.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
ok did this all but link seems unstable and i dont get much speed above 7~12k betwen ap and pc, how could i improve this one. Second system seems to have "weeping" "ic ic ic " my mouse and my system make some pauses, my processor achieve at least 17% of processing in idle mode, how to fix this things ? and my link crash sometimes. On 01/01/06, Roman Dewald <romad@gmx.de> wrote: > > > Hi i have an Dlink DWL-G520+ as following: > > ndis0@pci0:9:0: class=3D0x028000 card=3D0x3b041186 chip=3D0x9066104c re= v=3D0x00 hdr=3D0x00 > > vendor =3D 'Texas Instruments (TI)' > > device =3D 'TNETW1130(ACX111) 802.11b/g Wireless Cardbus/PCI Adap= ter' > > class =3D network > > but it isn't working well, someone knows if exist an native driver or > > how i must proceed (walktrhough) to put this net device to work > I have had problems with this card and ndis driver under 5.4 Release. I > upgraded my system to the 6.0 Release and it worked fine. > > To get the driver working, you have first to bild a module for the > FreeBSD kernel from Windows drivers supplied with your card. > I used ndisgen to convert the driver. You will get some files after the > conversion you will a couple of files. > Then you can load the converted module with kldload +absolute path to > the converted module. You can check dmesg to ensure the module was > loaded successfully. You will see something like that: > > ndis0: <D-Link AirPlus G+ DWL-G520+ Wireless PCI Adapter> mem > 0xcfffa000-0xcfffbfff,0xcffc0000-0xcffdffff irq 19 at device 11.0 on > pci0 > > Afterwards you have to load the wlan_wep module to get the wep > encryption working. > Now you can configure the network settings with ifconfig. > > Roman > > > > Thanks && Regards > > Msc. Bsc. Lu=EDs Vit=F3rio Cargnini > > IEEE Member > > Mastering Degree student @ PUC-RS Electrical Engineer Faculty > > _______________________________________________ > > freebsd-hardware@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-hardware > > To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.= org" > > > > -- Thanks && Regards Msc. Bsc. Lu=EDs Vit=F3rio Cargnini IEEE Member Mastering Degree student @ PUC-RS Electrical Engineer Faculty
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ae36f8040601041904r3f21c4d7r>