Date: Wed, 14 Jan 2004 16:12:27 +0300 From: Vyacheslav Silakov <seal@inar.ru> To: Thomas Moestl <t.moestl@tu-bs.de> Cc: freebsd-sparc64@freebsd.org Subject: Re[2]: FreeBSD 5.2-RC2 & big 160 gb HDD Message-ID: <606239651.20040114161227@inar.ru> In-Reply-To: <20031230153819.GB1766@timesink.dyndns.org> References: <144549029.20031230171603@inar.ru> <20031230153819.GB1766@timesink.dyndns.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Tuesday, December 30, 2003, 6:38:19 PM, you wrote: TM> On Tue, 2003/12/30 at 17:16:03 +0300, Vyacheslav Silakov wrote: >> >> Hello >> >> During FreeBSD 5.2-RC2 setup process on the Sun Netra X1 >> with 160 gb HDD drive I've got (with default HDD partition settings): >> >> Max Doing newfs -U -O2 /mnt/dev/ad0fad0: >> ad0: WARNING - READ_DMA recovered from missing interrupt >> >> and system completly frozes after that. TM> Try forcing the disk to UDMA33 (using atacontrol(8)). I have seen TM> similar problems on a Blade 100; my theory is that the I/O connector TM> board is electrically unfit to do UDMA66 (looking at the innards of TM> the box, that does not seem too unlikely). TM> - Thomas I've used Seagate x86 Ultra ATA Mode Switching Utility http://www.seagate.com/support/disc/utils.html to downgrade disk performance to UDMA33 (is it correct?). But the same problem is still persist on 5.2-RELEASE: system hangs during newfsing with message "WARNING - READ_DMA recovered from missing interrupt". Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-RELEASE #0: Sun Jan 11 06:09:12 GMT 2004 root@bobbi.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0852000. Preloaded mfs_root "/boot/mfsroot" at 0xc0852190. Timecounter "tick" frequency 400000000 Hz quality 0 real memory = 268435456 (256 MB) avail memory = 242909184 (231 MB) cpu0: Sun Microsystems UltraSparc-IIe Processor (400.00 MHz CPU) nexus0: <OpenFirmware Nexus device> pcib0: <U2P UPA-PCI bridge> on nexus0 pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A pcib0: [FAST] pcib0: [FAST] DVMA map: 0x60000000 to 0x63ffffff pci0: <OFW PCI bus> on pcib0 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 pci0: <old, non-VGA display device> at device 3.0 (no driver attached) pci0: <old, non-VGA display device> at device 3.0 (no driver attached) dc0: <Davicom DM9102A 10/100BaseTX> port 0x10000-0x100ff at device 12.0 on pci0 dc0: Ethernet address: 00:00:00:00:00:00 miibus0: <MII bus> on dc0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc1: <Davicom DM9102A 10/100BaseTX> port 0x10100-0x101ff mem 0x2000-0x20ff at de vice 5.0 on pci0 dc1: Ethernet address: 00:00:00:00:00:00 miibus1: <MII bus> on dc1 ukphy1: <Generic IEEE 802.3u media interface> on miibus1 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: <serial bus, USB> at device 10.0 (no driver attached) atapci0: <AcerLabs Aladdin UDMA66 controller> port 0x10220-0x1022f,0x10208-0x102 0b,0x10210-0x10217,0x10218-0x1021b,0x10200-0x10207 at device 13.0 on pci0 atapci0: [MPSAFE] ata2: at 0x10200 on atapci0 ata2: [MPSAFE] ata3: at 0x10210 on atapci0 ata3: [MPSAFE] Timecounters tick every 10.000 msec md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xc044e9a8 GEOM: create disk ad0 dp=0xfffff800607b60a0 ad0: 152627MB <ST3160021A> [310101/16/63] at ata2-master UDMA33 acd0: CDRW <LG CD-ROM CRD-8522B> at ata3-master PIO4 Mounting root from ufs:/dev/md0 warning: no time-of-day clock registered, system time will not be set accurately /stand/sysinstall running as init on serial console
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?606239651.20040114161227>