Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 02 Sep 2002 12:32:28 -0600 (MDT)
From:      "M. Warner Losh" <imp@bsdimp.com>
To:        sheldonh@starjuice.net
Cc:        blackend@FreeBSD.ORG, freebsd-current@FreeBSD.ORG
Subject:   Re: hw.pci.enable_io_modes default value.
Message-ID:  <20020902.123228.35194402.imp@bsdimp.com>
In-Reply-To: <20020902144921.GG849@starjuice.net>
References:  <20020901171238.GB238@marduk.blackend.org> <20020902144921.GG849@starjuice.net>

next in thread | previous in thread | raw e-mail | index | archive | help
In message: <20020902144921.GG849@starjuice.net>
            Sheldon Hearn <sheldonh@starjuice.net> writes:
: On (2002/09/01 19:12), Marc Fonvieille wrote:
: 
: > I had "freeze at boot" problem with my laptop and -CURRENT:
: > 
: > http://www.freebsd.org/cgi/query-pr.cgi?pr=42262
: > 
: > I found the solution: setting hw.pci.enable_io_modes to 0.
: > So I have a question: that sysctl has to be =1 by default? I mean if I
: > have that issue with it and my laptop, maybe I'll not be the only one
: > with that problem.
: > 
: > Well I'm sure there is a good reason for that default setting. Perhaps
: > we could write somewhere that setting may lead to hangs with some
: > hardware :)
: 
: Don't be too sure. :-)
: 
: revision 1.194
: date: 2002/07/26 07:58:16;  author: imp;  state: Exp;  lines: +36 -21
: Make PCI_ENABLE_IO_MODES a sysctl hw.pci.enable_io_modes.  It can also
: be set at boot time.  It defaults to 1 now since it can be set in the
: boot loader.  If this proves unwise, we can reset it to defaulting to 0.
: 
: If enough people have trouble with this default, we might want to set it
: to 0, since
: 
: 1) We can't please everyone.
: 2) We should try to please people with working hardware first.

I made it 1 because I wanted to get feedback on what hardware is
broken.  So far only two people have complained.  Hundreds complained
when the default was 0.  Seems like the choice was good to me still.

Warner

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020902.123228.35194402.imp>