Date: Wed, 15 Jan 2003 00:58:34 -0800 (PST) From: mmca@2531.org To: jdp@polstra.com Cc: sparc@FreeBSD.ORG Subject: Re: CVSup/sparc64: Come and get it! Message-ID: <200301150858.h0F8wYRC028036@one.2531.org> In-Reply-To: <20030114002110.GG16775@elvis.mu.org>
next in thread | previous in thread | raw e-mail | index | archive | help
John Polstra wrote: > Drum roll, please ... > > After much weeping and wailing and gnashing of teeth, I've gotten > CVSup working on FreeBSD/sparc64 platforms. You can grab the client > executable from here: > > http://people.freebsd.org/~jdp/cvsup-sparc64/ > > It seems to work just fine, but I've hardly tested it at all. So be > careful out there. > cvsup worked great for /usr/src but while syncing ports I also got: Edit ports/mail/tmda/Makefile *** *** runtime error: *** Value out of range *** file "/s/scratch/jdp/ezm3-1.1/libs/libm3/src/uid/Common/TimeStamp.m3", line 70 *** use option @M3stackdump to get a stack trace Abort (core dumped) I am going to rm ports and try to reproduce this error. -M -------------------- uname -a FreeBSD sol.2531.org 5.0-CURRENT FreeBSD 5.0-CURRENT #0: Wed Jan 15 02:20:31 GMT 2003 mmca@:/usr/obj/usr/src/sys/SOL sparc64 dmesg Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #0: Wed Jan 15 02:20:31 GMT 2003 mmca@:/usr/obj/usr/src/sys/SOL Preloaded elf kernel "/boot/kernel/kernel" at 0xc035e000. Timecounter "tick" frequency 333000000 Hz cpu0: Sun Microsystems UltraSparc-IIi Processor (333.00 MHz CPU) Model: SUNW,Ultra-5_10 Initializing GEOMetry subsystem nexus0: <OpenFirmware Nexus device> pcib0: <U2P UPA-PCI bridge> on nexus0 pcib0: Sabre, impl 0, version 0, ign 0x7c0 DVMA map: 0xc0000000 to 0xc1ffffff pci0: <PCI bus> on pcib0 pcib1: <APB PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib2: <APB PCI-PCI bridge> at device 1.1 on pci0 pci2: <PCI bus> on pcib2 ebus0: revision 0x01 ebus0: <PCI-EBus2 bridge> mem 0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 1.0 on pci2 ebus0: <auxio> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 (no driver attached) ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached) ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached) ebus0: <se> addr 0x1400400000-0x140040007f irq 43 (no driver attached) ebus0: <su> addr 0x14003083f8-0x14003083ff irq 41 (no driver attached) ebus0: <su> addr 0x14003062f8-0x14003062ff irq 42 (no driver attached) ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x140030015c-0x140030015d,0x14003043bc-0x14003043cb irq 34 (no driver attached) ebus0: <fdthree> addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003023f0-0x14003023f7 irq 39 (no driver attached) eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0 eeprom0: model mk48t59 eeprom0: hostid 80a28314 ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached) ebus0: <SUNW,CS4231> addr 0x1400722000-0x1400722003,0x1400704000-0x140070400f,0x1400702000-0x140070200f,0x1400200000-0x14002000ff irq 36,35 (no driver attached) hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff irq 33 at device 1.1 on pci2 hme0: Ethernet address: 08:00:20:a2:83:14 miibus0: <MII bus> on hme0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci2: <display, VGA> at device 2.0 (no driver attached) atapci0: <CMD 646 ATA controller> port 0xc00020-0xc0002f,0xc00018-0xc0001b,0xc00010-0xc00017,0xc00008-0xc0000b,0xc00000-0xc00007 irq 32 at device 3.0 on pci2 ata2: at 0xc00000 on atapci0 ata3: at 0xc00010 on atapci0 Timecounters tick every 10.000 msec ad0: 8693MB <ST39140A> [17662/16/63] at ata2-master WDMA2 ad1: 8693MB <ST39140A> [17662/16/63] at ata2-slave WDMA2 acd0: CDROM <CRD-8322B> at ata3-master PIO4 Mounting root from ufs:/dev/ad0a pid 455 (cvsup), uid 0: exited on signal 6 (core dumped) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-sparc" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200301150858.h0F8wYRC028036>