Date: Mon, 3 Nov 2014 07:57:22 +0100 From: Borja Marcos <borjam@sarenet.es> To: Wes Morgan <morganw@chemikals.org> Cc: freebsd-scsi@freebsd.org Subject: Re: MPS driver and latest firmware Message-ID: <C5285AED-F803-47E6-85AC-DFD8EC76D718@sarenet.es> In-Reply-To: <CALCz5MGNK4W2v_DX2-cHirm3TeMVrr%2BX3RwWzzTvA4OMqzHZbA@mail.gmail.com> References: <CALCz5MH47gm-2m9bXbb9dVn-jnOTOBsqFqom-aSGgBdkS83QOg@mail.gmail.com> <DD2BE91C-ADB0-4D75-950D-654A388208AE@sarenet.es> <CALCz5MGNK4W2v_DX2-cHirm3TeMVrr%2BX3RwWzzTvA4OMqzHZbA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Nov 2, 2014, at 10:34 PM, Wes Morgan wrote: > I was updating the firmware hoping that the targets went back to being = assigned in "next available" order rather than sticky. I like each bay = to have a specific device name, which is impossible due to the = "remembered" target IDs. Although complicated, sas2ircu is your friend. It will give you an (as far as I know!) accurate list of disks, = including the backplane slot where they are plugged.=20 For now it's the best solution I have found to identify the disks. The = funny thing is, it's an "IR" configuration utility and my cards are in "IT" mode. But it works :) Cheers, Borja. Output example: root@elibm:~ # sas2ircu 0 display LSI Corporation SAS2 IR Configuration Utility. Version 18.00.00.00 (2013.11.18)=20 Copyright (c) 2009-2013 LSI Corporation. All rights reserved.=20 Read configuration has been initiated for controller 0 ------------------------------------------------------------------------ Controller information ------------------------------------------------------------------------ Controller type : SAS2008 BIOS version : 7.37.00.00 Firmware version : 19.00.00.00 Channel description : 1 Serial Attached SCSI Initiator ID : 0 Maximum physical devices : 255 Concurrent commands supported : 3432 Slot : Unknown Segment : 0 Bus : 17 Device : 0 Function : 0 RAID Support : No ------------------------------------------------------------------------ IR Volume information ------------------------------------------------------------------------ ------------------------------------------------------------------------ Physical device information ------------------------------------------------------------------------ Initiator at ID #0 Device is a Hard disk Enclosure # : 2 Slot # : 16 SAS Address : 5000c50-0-05b5-ce25 State : Ready (RDY) Size (in MB)/(in sectors) : 140014/286749479 Manufacturer : SEAGATE=20 Model Number : ST9146803SS =20 Firmware Revision : FS03 Serial No : 3SD02W5L GUID : N/A Protocol : SAS Drive Type : SAS_HDD Device is a Hard disk Enclosure # : 2 Slot # : 17 SAS Address : 5005076-0-3e8e-81a2 State : Ready (RDY) Size (in MB)/(in sectors) : 953869/1953525167 Manufacturer : ATA =20 Model Number : Samsung SSD 840=20 Firmware Revision : BB0Q Serial No : S1D9NEADA08549F GUID : N/A Protocol : SATA Drive Type : SATA_SSD Device is a Hard disk Enclosure # : 2 Slot # : 18 SAS Address : 5005076-0-3e8e-81a3 State : Ready (RDY) Size (in MB)/(in sectors) : 953869/1953525167 Manufacturer : ATA =20 Model Number : Samsung SSD 840=20 Firmware Revision : BB0Q Serial No : S1D9NEADA08548T GUID : N/A Protocol : SATA Drive Type : SATA_SSD Device is a Hard disk Enclosure # : 2 Slot # : 19 SAS Address : 5005076-0-3e8e-81a4 State : Ready (RDY) Size (in MB)/(in sectors) : 953869/1953525167 Manufacturer : ATA =20 Model Number : Samsung SSD 840=20 Firmware Revision : BB0Q Serial No : S1D9NEADA08568E GUID : N/A Protocol : SATA Drive Type : SATA_SSD Device is a Hard disk Enclosure # : 2 Slot # : 20 SAS Address : 5005076-0-3e8e-81a5 State : Ready (RDY) Size (in MB)/(in sectors) : 953869/1953525167 Manufacturer : ATA =20 Model Number : Samsung SSD 840=20 Firmware Revision : BB0Q Serial No : S1D9NEADA08547X GUID : N/A Protocol : SATA Drive Type : SATA_SSD Device is a Hard disk Enclosure # : 2 Slot # : 21 SAS Address : 5005076-0-3e8e-81a6 State : Ready (RDY) Size (in MB)/(in sectors) : 953869/1953525167 Manufacturer : ATA =20 Model Number : Samsung SSD 840=20 Firmware Revision : BB0Q Serial No : S1D9NEADA08518Y GUID : N/A Protocol : SATA Drive Type : SATA_SSD Device is a Hard disk Enclosure # : 2 Slot # : 22 SAS Address : 5005076-0-3e8e-81a7 State : Ready (RDY) Size (in MB)/(in sectors) : 953869/1953525167 Manufacturer : ATA =20 Model Number : Samsung SSD 840=20 Firmware Revision : BB0Q Serial No : S1D9NEADA08556K GUID : N/A Protocol : SATA Drive Type : SATA_SSD Device is a Enclosure services device Enclosure # : 2 Slot # : 255 SAS Address : 5005076-0-3e8e-81b9 State : Standby (SBY) Manufacturer : IBM-ESXS Model Number : SAS EXP BP =20 Firmware Revision : 61A6 Serial No : 00000006 GUID : N/A Protocol : SAS Device Type : Enclosure services device Device is a Hard disk Enclosure # : 3 Slot # : 0 SAS Address : 5005076-0-3e8e-86e9 State : Ready (RDY) Size (in MB)/(in sectors) : 953869/1953525167 Manufacturer : ATA =20 Model Number : Samsung SSD 840=20 Firmware Revision : BB0Q Serial No : S1D9NEADA08550R GUID : N/A Protocol : SATA Drive Type : SATA_SSD Device is a Hard disk Enclosure # : 3 Slot # : 1 SAS Address : 5005076-0-3e8e-86ea State : Ready (RDY) Size (in MB)/(in sectors) : 953869/1953525167 Manufacturer : ATA =20 Model Number : Samsung SSD 840=20 Firmware Revision : BB0Q Serial No : S1D9NEADA08911Y GUID : N/A Protocol : SATA Drive Type : SATA_SSD Device is a Hard disk Enclosure # : 3 Slot # : 2 SAS Address : 5005076-0-3e8e-86eb State : Ready (RDY) Size (in MB)/(in sectors) : 953869/1953525167 Manufacturer : ATA =20 Model Number : Samsung SSD 840=20 Firmware Revision : BB0Q Serial No : S1D9NEADA08811L GUID : N/A Protocol : SATA Drive Type : SATA_SSD Device is a Hard disk Enclosure # : 3 Slot # : 13 SAS Address : 5000c50-0-05b5-e531 State : Ready (RDY) Size (in MB)/(in sectors) : 140014/286749479 Manufacturer : SEAGATE=20 Model Number : ST9146803SS =20 Firmware Revision : FS03 Serial No : 3SD02STR GUID : N/A Protocol : SAS Drive Type : SAS_HDD Device is a Hard disk Enclosure # : 3 Slot # : 14 SAS Address : 5000c50-0-05b5-d489 State : Ready (RDY) Size (in MB)/(in sectors) : 140014/286749479 Manufacturer : SEAGATE=20 Model Number : ST9146803SS =20 Firmware Revision : FS03 Serial No : 3SD02TV1 GUID : N/A Protocol : SAS Drive Type : SAS_HDD Device is a Hard disk Enclosure # : 3 Slot # : 15 SAS Address : 5000c50-0-05b5-f0ad State : Ready (RDY) Size (in MB)/(in sectors) : 140014/286749479 Manufacturer : SEAGATE=20 Model Number : ST9146803SS =20 Firmware Revision : FS03 Serial No : 3SD03F4C GUID : N/A Protocol : SAS Drive Type : SAS_HDD Device is a Enclosure services device Enclosure # : 3 Slot # : 255 SAS Address : 5005076-0-3e8e-86f9 State : Standby (SBY) Manufacturer : IBM-ESXS Model Number : SAS EXP BP =20 Firmware Revision : 61A6 Serial No : 00000006 GUID : N/A Protocol : SAS Device Type : Enclosure services device ------------------------------------------------------------------------ Enclosure information ------------------------------------------------------------------------ Enclosure# : 1 Logical ID : 500605b0:07ba2100 Numslots : 8 StartSlot : 0 Enclosure# : 2 Logical ID : 50050760:3e8e81a0 Numslots : 25 StartSlot : 0 Enclosure# : 3 Logical ID : 50050760:3e8e86e0 Numslots : 25 StartSlot : 0 ------------------------------------------------------------------------ SAS2IRCU: Command DISPLAY Completed Successfully. SAS2IRCU: Utility Completed Successfully. root@elibm:~ #=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C5285AED-F803-47E6-85AC-DFD8EC76D718>