From owner-freebsd-questions Wed Dec 13 21:12:18 1995 Return-Path: owner-questions Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id VAA04114 for questions-outgoing; Wed, 13 Dec 1995 21:12:18 -0800 (PST) Received: from genesis.atrad.adelaide.edu.au (genesis.atrad.adelaide.edu.au [129.127.96.120]) by freefall.freebsd.org (8.7.3/8.7.3) with ESMTP id VAA04077 for ; Wed, 13 Dec 1995 21:12:10 -0800 (PST) Received: from msmith@localhost by genesis.atrad.adelaide.edu.au (8.6.12/8.6.9) id PAA25531; Thu, 14 Dec 1995 15:51:04 GMT From: Michael Smith Message-Id: <199512141551.PAA25531@genesis.atrad.adelaide.edu.au> Subject: Re: ACER Motherboard: SCSI Recommendations? To: scrappy@hub.org (Marc G. Fournier) Date: Thu, 14 Dec 1995 15:51:03 +0000 () Cc: ejc@gargoyle.bazzle.net, questions@FreeBSD.ORG In-Reply-To: from "Marc G. Fournier" at Dec 13, 95 11:02:33 pm MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG Precedence: bulk Marc G. Fournier stands accused of saying: > > > Now, a friend of mine talked about the NCR PCI controllers > > > that are relatively cheap (~$100), but he mentioned that they work > > > particularly good on an ASUS motherboard... > > > > > I don't think your motherboard has NCR bios built in, so you > > could not use the ASUS NCR scsi card. Acculogic makes a NCR 53c825 Are you sure of this? I'd be really inclined to at least _try_ (if possible) before committing. > > card which is SCSI-II Fast/Wide and has the bios onboard. I have > > used this card without any problems, with FreeBSD 2.0, 2.0.5, 2.1.0. > > This card sells for about $129 at NECX. > > > > Okay, price is good...but...do I need special hard drives? I > hate to say it, but I really don't know what the various types of SCSI > are :( Nope. > These are the drives I'm running right now. They all come > up as SCSI-2, but that's about the only information that I have on > them...will they support Fast/Wide? If not, is there another > NCR PCI SCSI controller that I can use that will support these > drives? Right now, I'm hanging off of an Adaptec 1542 controller... They should all work just fine. > Then again, am I reading "Fast/Wide" wrong? Should I be > reading it as "Fast *or* Wide"? Cause, looking at Quantum's Home > Page, the LPS340S supports Fast, but it doesn't mentioned Wide.. "Fast" is a prerequisite for any new disk; "wide" means the controller has the extra bits required to talk to a "wide" SCSI device, should you wish to connect one. > And, finally...is there anyone out there from the Toronto > area that would know where I can find said controller? I'd prefer > somewhere local, if at all possible... Just about anyone should be able to point you at an NCR controller; one caveat, be _VERY_ sure it has _active_, not _passive_ termination onboard. If you want to look at one to verify this for yourself, the little resistor packs should have '111' on them, but _not_ "221331" or "220/330" or similar. If there aren't any resistor packs, then you either have no termination, or you have active (and possibly automatic) termination. > Marc G. Fournier | POP Mail Telnet Acct DNS Hosting -- ]] Mike Smith, Software Engineer msmith@atrad.adelaide.edu.au [[ ]] Genesis Software genesis@atrad.adelaide.edu.au [[ ]] High-speed data acquisition and (GSM mobile) 041-122-496 [[ ]] realtime instrument control (ph/fax) +61-8-267-3039 [[ ]] "Who does BSD?" "We do Chucky, we do." [[