Skip site navigation (1)Skip section navigation (2)
Date:      08 May 2003 23:02:33 +0200
From:      arno@heho.snv.jussieu.fr
To:        freebsd-mobile@freebsd.org
Cc:        freebsd-current@freebsd.org
Subject:   mmake / maake (Toshiba Satelite 6000 X11 keyboard weirdness)
Message-ID:  <wp8ythgniu.fsf@heho.snv.jussieu.fr>

next in thread | raw e-mail | index | archive | help
--=-=-=


Hello,

I rrun -curreent on a Toshiba sattellite Pro 6000 for over
a month with no particular problem, other than a very
irrittating "keyboard echo" when in X11 mode.

so when I think to type "make", I very often get "mmake" or "maake"
but *never* "mmmake" or "maaaake", so I think it hhas nothing
to do with keyboard autorepeat ...

It happens in xterms, mozilla, opera, emacs, ...

I tried vaarious opttions :
  - disablingg ACPI makkess no difference
  - stripped down XF86Config 
  - variouss SC_* and KBD_* kernel-conffig options
(NB,
  options         MAXCONS=4
maakes that I cannot type
text at all, but this is also true forr my desktop -current
which otherwise behaves OK)

Please ffind attachedd dmesg andd uname outtput, kernel-cconfig,
XF86Config and XFree86.0.log.

If someone has another idea to test ...

Thanx a lot.

Regards,


  Arno

(NB, I ddid not correct typingg errors (and I am aa slow typer)))

-- 

  Arno J. Klaassen
  INSERM U483
  9, Quai St Bernard
  75005 Paris

  arno@ccr.jussieu.fr


--=-=-=
Content-Type: application/octet-stream
Content-Disposition: attachment; filename=uname-a
Content-Description: uname -a

FreeBSD M 5.1-BETA FreeBSD 5.1-BETA #0: Thu May  8 16:03:13 CEST 2003     toor@M:/usr/obj/usr/src/sys/Sat-current  i386

--=-=-=
Content-Type: application/octet-stream
Content-Disposition: attachment; filename=dmesg-a
Content-Description: dmesg -a

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-BETA #0: Thu May  8 16:03:13 CEST 2003
    toor@M:/usr/obj/usr/src/sys/Sat-current
Preloaded elf kernel "/boot/kernel/kernel" at 0xc056e000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc056e2bc.
Calibrating clock(s) ... i8254 clock: 1228967 Hz
1228967 Hz differs from default of 1193182 Hz by more than 1%
Timecounter "i8254"  frequency 1193182 Hz
Calibrating TSC clock ... TSC clock: 995963304 Hz
Timecounter "TSC"  frequency 995963304 Hz
CPU: Intel(R) Pentium(R) III Mobile CPU      1000MHz (995.96-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 653656064 (623 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000595000 - 0x0000000026443fff, 636153856 bytes (155311 pages)
avail memory = 629006336 (599 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f00b0
bios32: Entry = 0xf98e9 (c00f98e9)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x97ab
pnpbios: Found PnP BIOS data at 0xc00f0260
pnpbios: Entry = f0000:8d8  Rev = 1.0
pnpbios: Event flag at 510
pnpbios: OEM ID c936f351
Other BIOS signatures found:
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
random: <entropy source>
tap0: bpf attached
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <TOSHIB 750     > on motherboard
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000084
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=164410b9)
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00f01d0
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0    2    A   0x59  11
embedded    0    6    A   0x08  11
embedded    0   17    A   0x01  11
embedded    0   17    B   0x02  11
embedded    0   10    A   0x04  11
embedded    1    0    A   0x03  11
embedded    0   16    A   0x03  11
embedded    0   16    B   0x04  11
embedded    0   18    A   0x01  11
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks BAD  min = 2, max = 8, width = 6
ACPI timer looks BAD  min = 3, max = 7, width = 4
ACPI timer looks BAD  min = 3, max = 7, width = 4
ACPI timer looks BAD  min = 2, max = 8, width = 6
ACPI timer looks BAD  min = 2, max = 8, width = 6
ACPI timer looks BAD  min = 2, max = 8, width = 6
ACPI timer looks BAD  min = 3, max = 8, width = 5
ACPI timer looks BAD  min = 3, max = 8, width = 5
ACPI timer looks BAD  min = 3, max = 7, width = 4
ACPI timer looks BAD  min = 2, max = 8, width = 6
Timecounter "ACPI-safe"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xee08-0xee0b on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_tz0: <thermal zone> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.FNC0.LNKA irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.17.0
\\_SB_.PCI0.FNC0.LNKB irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.17.1
\\_SB_.PCI0.FNC0.LNKD irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.10.0
\\_SB_.PCI0.FNC0.LNKC irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.16.0
\\_SB_.PCI0.FNC0.LNKD irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.16.1
\\_SB_.PCI0.FNC0.LNKH irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.6.0
\\_SB_.PCI0.FNC0.LNKA irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.18.0
\\_SB_.PCI0.FNC0.LNKG irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.2.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.FNC0.LNKA irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.17.0
\\_SB_.PCI0.FNC0.LNKB irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.17.1
\\_SB_.PCI0.FNC0.LNKD irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.10.0
\\_SB_.PCI0.FNC0.LNKC irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.16.0
\\_SB_.PCI0.FNC0.LNKD irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.16.1
\\_SB_.PCI0.FNC0.LNKH irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.6.0
\\_SB_.PCI0.FNC0.LNKA irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.18.0
\\_SB_.PCI0.FNC0.LNKG irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.2.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base f0000000, size 26, enabled
found->	vendor=0x10b9, dev=0x1644, revid=0x01
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0xa210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 1  supports D0 D3  current D0
found->	vendor=0x10b9, dev=0x5247, revid=0x00
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0400, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 32, base f7eff000, size 12, enabled
found->	vendor=0x10b9, dev=0x5237, revid=0x03
	bus=0, slot=2, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000eff0, size  4, enabled
found->	vendor=0x10b9, dev=0x5229, revid=0xc3
	bus=0, slot=4, func=0
	class=01-01-f0, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000ed00, size  8, enabled
	map[14]: type 1, range 32, base f7efe000, size 12, enabled
found->	vendor=0x10b9, dev=0x5451, revid=0x01
	bus=0, slot=6, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=0x10b9, dev=0x1533, revid=0x00
	bus=0, slot=7, func=0
	class=06-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x000f, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 1  supports D0 D3  current D0
found->	vendor=0x10b9, dev=0x7101, revid=0x00
	bus=0, slot=8, func=0
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 32, base f7efd000, size 12, enabled
	map[14]: type 4, range 32, base 0000eb40, size  6, enabled
	map[18]: type 1, range 32, base f7ec0000, size 17, enabled
found->	vendor=0x8086, dev=0x1229, revid=0x0d
	bus=0, slot=10, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=0x1179, dev=0x0617, revid=0x32
	bus=0, slot=17, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0000, statreg=0x0490, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 1  supports D0 D3  current D0
found->	vendor=0x1179, dev=0x0617, revid=0x32
	bus=0, slot=17, func=1
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0000, statreg=0x0490, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=255
	powerspec 1  supports D0 D3  current D0
	map[10]: type 1, range 32, base f7ebfe00, size  9, enabled
found->	vendor=0x1179, dev=0x0805, revid=0x03
	bus=0, slot=18, func=0
	class=08-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
agp0: <Ali Generic host to PCI bridge> mem 0xf0000000-0xf3ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xf7f00000-0xfdffffff
pcib1:   prefetched decode 0xfff00000-0xfffff
---- initial configuration ------------------------
\\_SB_.PCI0.FNC0.LNKC irq  11: [  3  4  5  6  7 10 11] low,level,sharable 1.0.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.FNC0.LNKC irq  11: [  3  4  5  6  7 10 11] low,level,sharable 1.0.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 1, range 32, base fc000000, size 25, enabled
	map[14]: type 1, range 32, base fbc00000, size 22, enabled
	map[18]: type 1, range 32, base f8000000, size 25, enabled
	map[1c]: type 1, range 32, base f7ff8000, size 15, enabled
found->	vendor=0x1023, dev=0x8820, revid=0x82
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xf7eff000-0xf7efffff irq 11 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
umass0: TEAC TEAC FD-05PUB, rev 1.10/0.00, addr 2
umass0:0:0:-1: Attached to scbus0
atapci0: <AcerLabs Aladdin UDMA66 controller> port 0xeff0-0xefff at device 4.0 on pci0
ata0: pre reset mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: after reset mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: pre reset mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 14 eb
ata1: after reset mask=03 stat0=00 stat1=00
ata1: devices=0c
ata1: at 0x170 irq 15 on atapci0
pcm0: <Acer Labs M5451> port 0xed00-0xedff mem 0xf7efe000-0xf7efefff irq 11 at device 6.0 on pci0
pcm0: <Asahi Kasei AK4543 AC97 Codec (id = 0x414b4d02)>
pcm0: Codec features headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, AKM 3D Audio
pcm0: sndbuf_setmap 7a0000, 1000; 0xc4bec000 -> 7a0000
pcm0: sndbuf_setmap 77d000, 1000; 0xc4be9000 -> 77d000
pcm0: sndbuf_setmap 75b000, 1000; 0xc4be7000 -> 75b000
pcm0: sndbuf_setmap 739000, 1000; 0xc4be5000 -> 739000
pcm0: sndbuf_setmap 737000, 1000; 0xc4be3000 -> 737000
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <bridge, PCI-unknown> at device 8.0 (no driver attached)
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xeb40-0xeb7f mem 0xf7ec0000-0xf7edffff,0xf7efd000-0xf7efdfff irq 11 at device 10.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:00:39:bd:7b:b1
fxp0: PCI IDs: 8086 1229 1179 0001 000d
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
cbb0: <ToPIC100 PCI-CardBus Bridge> at device 17.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: matched entry for 0.17.INTA (source \\_SB_.PCI0.FNC0.LNKA)
pcib0: slot 17 INTA is routed to irq 11
cbb1: <ToPIC100 PCI-CardBus Bridge> at device 17.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib0: matched entry for 0.17.INTB (source \\_SB_.PCI0.FNC0.LNKB)
pcib0: slot 17 INTB is routed to irq 11
pci0: <base peripheral> at device 18.0 (no driver attached)
unknown: not probed (disabled)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> flags 0x100 irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000100, flags:00000000, packet size:3
psm0: syncmask:00, syncbits:00
sio0: irq maps: 0x201 0x211 0x201 0x201
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x201 0x201 0x201 0x201
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
linprocfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
Linux ELF exec handler installed
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ata1-slave: timeout waiting for interrupt
ata1-slave: ATAPI identify failed
ad0: success setting UDMA66 on AcerLabs Aladdin chip
ad0: <TOSHIBA MK2018GAP/M1.42 A> ATA-5 disk at ata0-master
ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
ad0: piomode=12 dmamode=34 udmamode=69 cblid=1
GEOM: new disk ad0
ar: FreeBSD check1 failed
ata1-master: piomode=12 dmamode=34 udmamode=66 dmaflag=1
ata1-master: success setting PIO4 on AcerLabs Aladdin chip
acd0: <UJDA720 DVD/CDRW/1.00> CD-RW drive at ata1 as master
acd0: read 4134KB/s (34515KB/s) write 344KB/s (344KB/s), 2048KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM, packet
acd0: Writes: CD-R, CD-RW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-RW 120mm photo disc
[0] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:16322040 l:22748040
[1] f:80 typ:23 s(CHS):0/1/1 e(CHS):1023/7/63 s:63 l:16321977
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 8356884480 length 11646996480 end 20003880959
GEOM: Configure ad0s2, start 32256 length 8356852224 end 8356884479
GEOM: Configure ad0s1a, start 0 length 262144000 end 262143999
GEOM: Configure ad0s1b, start 524288000 length 536870912 end 1061158911
GEOM: Configure ad0s1c, start 0 length 11646996480 end 11646996479
GEOM: Configure ad0s1d, start 262144000 length 262144000 end 524287999
GEOM: Configure ad0s1e, start 1061158912 length 10585837568 end 11646996479
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): error 5
(probe0:ata0:0:0:0): Retries Exhausted
(probe1:ata0:0:1:0): error 5
(probe1:ata0:0:1:0): Retries Exhausted
(probe3:ata1:0:1:0): error 5
(probe3:ata1:0:1:0): Retries Exhausted
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): error 5
(probe0:ata0:0:0:0): Retries Exhausted
(probe1:ata0:0:1:0): error 5
(probe1:ata0:0:1:0): Retries Exhausted
(probe3:ata1:0:1:0): error 5
(probe3:ata1:0:1:0): Retries Exhausted
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe4:umass-sim0:0:0:0): error 22
(probe4:umass-sim0:0:0:0): Unretryable Error
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <TEAC FD-05PUB 1026> Removable Direct Access SCSI-0 device 
pass0: 1.000MB/s transfers
pass1 at ata1 bus 0 target 0 lun 0
pass1: <MATSHITA UJDA720 DVD/CDRW 1.00> Removable CD-ROM SCSI-0 device 
pass1: 16.000MB/s transfers
GEOM: new disk da0
cd0 at ata1 bus 0 target 0 lun 0
cd0: <MATSHITA UJDA720 DVD/CDRW 1.00> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: cd present [20770 x 2048 byte records]
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <TEAC FD-05PUB 1026> Removable Direct Access SCSI-0 device 
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
Unretryable error
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
Unretryable error
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
Opened disk da0 -> 6
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
Loading configuration files.
Entropy harvesting:
 interrupts
 ethernet
 point_to_point
.
swapon: adding /dev/ad0s1b as swap device
Starting file system checks:
/dev/ad0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a: clean, 82993 free (401 frags, 10324 blocks, 0.3% fragmentation)
/dev/ad0s1e: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1e: clean, 1301004 free (44852 frags, 157019 blocks, 0.9% fragmentation)
/dev/ad0s1d: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1d: clean, 113890 free (474 frags, 14177 blocks, 0.4% fragmentation)
Setting hostname: M.
module_register: module if_tap already exists!
Module if_tap failed to register: 17
can't re-use a leaf (if_tap_debug)!
tap0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
	ether 00:90:27:3f:12:9f
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 
	inet 127.0.0.1 netmask 0xff000000 
	inet 192.168.38.38 netmask 0xffffffff 
Additional routing options:
.
hw.bus.devctl_disable: 
0
 -> 
1

Mounting NFS file systems:
.
Starting syslogd.
May  8 17:44:23 M syslogd: kernel boot file is /boot/kernel/kernel
Starting named.
Starting rpcbind.
ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
NFS access cache time=2
Starting usbd.
Starting apm.
Starting apm.
Starting apmd.
Starting local daemons:
disklabel: 
Geom not specified

GEOM: Configure md0c, start 0 length 268435456 end 268435455
/dev/md0c: 256.0MB (524288 sectors) block size 16384, fragment size 2048
	using 4 cylinder groups of 64.02MB, 4097 blks, 16448 inodes.
super-block backups (for fsck -b #) at:
 160,
 131264,
 262368,
 393472

GEOM: Reconfigure md0c, start 0 length 268435456 end 268435455
.
Updating motd.
Configuring syscons:
 keymap
 keyrate
 blanktime
.
Starting sshd.
Initial i386 initialization:
.
Additional ABI support:
.
Starting cron.
Local package initialization:
 FlexLM
 
Checking license file for local hostname and local hostid . . .
 
Taking down any existing license manager daemons . . .
 
    No license manager daemons running . . .
 
Starting license manager . . .
 
    Debug logfile = /var/tmp/lm_TMW.log
 
.
Additional TCP options:
.
Starting background file system checks in 60 seconds.

Thu May  8 17:44:35 CEST 2003
May  8 17:44:53 M login: ROOT LOGIN (toor) ON ttyv0
acpi_cmbat1: battery initialization failed, giving up
May  8 17:45:58 M login: ROOT LOGIN (toor) ON ttyv1
acpi_lid0: Lid closed
acpi0: AcpiGetSleepTypeData failed - AE_NOT_FOUND
acpi_lid0: Lid opened

--=-=-=
Content-Type: application/octet-stream
Content-Disposition: attachment; filename=XF86Config
Content-Description: XF86Config

Section "ServerLayout"
	Identifier     "XFree86 Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "ServerFlags"
        # NoTrapSignals
        # AllowMouseOpenFail
        # Option "DPMS"
EndSection

Section "Files"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
        FontPath     "/usr/X11R6/lib/X11/fonts/TTF/"
        FontPath     "/usr/X11R6/lib/X11/fonts/URW/"
        FontPath     "/usr/X11R6/lib/X11/fonts/freefont/"
        FontPath "/usr/X11R6/lib/X11/fonts/bitstream-vera/"
#        FontPath     "/usr/X11R6/lib/X11/fonts/mozilla/"
        FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic/"
        FontPath     "/usr/X11R6/lib/X11/fonts/webfonts/"
EndSection

Section "Module"
#SubSection "extmod"
#        Option  "omit ddc"
#EndSubSection
	Load  "extmod"
# XIE and PEX5 are obsolete
	#Load  "xie"
	#Load  "pex5"
	Load  "glx"
	Load  "dri"
	Load  "dbe"
# Arno; copied from dont remember where ...
#	Load  "record"
#	Load  "xtrap"
#
        Load  "freetype"
        Load  "bitmap"
	Load  "speedo"
	Load  "type1"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "keyboard"
#
        #Option "XkbRules"    "xfree86"
        Option "XkbModel"    "pc105"
        Option "XkbLayout"   "fr"
        #Option "XkbVariant"  ""
        #Option "XkbOptions"  "grp:switch"
#
#        Option "AutoRepeat" "800 20"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "PS/2"
	Option	    "Device" "/dev/psm0"
#	Option	    "Device" "/dev/sysmouse"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
# values from Gravina's configuration
    VertRefresh 50-100
    HorizSync   31.5 - 64.3
    
# values suggested by some web user
#    VertRefresh 60
#    HorizSync   33-64
    
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "VGAClocks"          	# [<bool>]
        #Option     "SWcursor"                  # [<bool>]
        #Option     "PciRetry"                  # [<bool>]
        #Option     "NoAccel" "True"                  # [<bool>]
        #Option     "SetMClk"                   # <freq>
        #Option     "MUXThreshold"              # <i>
        #Option     "ShadowFB"                  # [<bool>]
        #Option     "Rotate"                    # [<str>]
        #Option     "VideoKey"                  # <i>
        #Option     "NoMMIO"                    # [<bool>]
        #Option     "NoPciBurst" "True"                # [<bool>]
        #Option     "MMIOonly"                  # [<bool>]
        #Option     "CyberShadow"               # [<bool>]
        #Option     "CyberStretch"              # [<bool>]
        #Option     "XvHsync"                   # <i>
        #Option     "XvVsync"                   # <i>
        #Option     "XvBskew"                   # <i>
        #Option     "XvRskew"                   # <i>
	Identifier  "Card0"
	Driver      "trident"
	VendorName  "Trident"
	BoardName   "CyberBlade/XP/DSTN/Ai1"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
        DefaultDepth 24
	SubSection "Display"
		Depth     1
	EndSubSection
	SubSection "Display"
		Depth     4
	EndSubSection
	SubSection "Display"
		Depth     8
	EndSubSection
	SubSection "Display"
		Depth     15
	EndSubSection
	SubSection "Display"
		Depth     16
                Modes       "1024x768" "1280x1024" "1400x1050"
	EndSubSection
	SubSection "Display"
		Depth     24
                Modes       "1024x768"
	EndSubSection
EndSection


--=-=-=
Content-Type: application/octet-stream
Content-Disposition: attachment; filename=XFree86.0.log
Content-Description: XFree86.0.log


XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: FreeBSD 5.1 i386 [ELF] 
Build Date: 08 May 2003
	Before reporting problems, check http://www.XFree86.Org/
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu May  8 17:46:33 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "fr"
(**) XKB: layout: "fr"
(==) Keyboard: CustomKeycode disabled
(WW) The directory "/usr/X11R6/lib/X11/fonts/freefont/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/webfonts/" does not exist.
	Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/URW/,/usr/X11R6/lib/X11/fonts/bitstream-vera/,/usr/X11R6/lib/X11/fonts/cyrillic/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(II) Module ABI versions:
	XFree86 ANSI C Emulation: 0.2
	XFree86 Video Driver: 0.6
	XFree86 XInput driver : 0.4
	XFree86 Server Extension : 0.2
	XFree86 Font Renderer : 0.4
(II) Loader running on freebsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10b9,1644 card 0000,0000 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 10b9,5247 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:02:0: chip 10b9,5237 card 1179,0004 rev 03 class 0c,03,10 hdr 00
(II) PCI: 00:04:0: chip 10b9,5229 card 1179,0004 rev c3 class 01,01,f0 hdr 00
(II) PCI: 00:06:0: chip 10b9,5451 card 1179,0001 rev 01 class 04,01,00 hdr 00
(II) PCI: 00:07:0: chip 10b9,1533 card 1179,0004 rev 00 class 06,01,00 hdr 00
(II) PCI: 00:08:0: chip 10b9,7101 card 1179,0001 rev 00 class 06,80,00 hdr 00
(II) PCI: 00:0a:0: chip 8086,1229 card 1179,0001 rev 0d class 02,00,00 hdr 00
(II) PCI: 00:11:0: chip 1179,0617 card fffc,0000 rev 32 class 06,07,00 hdr 82
(II) PCI: 00:11:1: chip 1179,0617 card fffc,0000 rev 32 class 06,07,00 hdr 82
(II) PCI: 00:12:0: chip 1179,0805 card 1179,0001 rev 03 class 08,80,00 hdr 00
(II) PCI: 01:00:0: chip 1023,8820 card 1179,0001 rev 82 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,4), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xf7f00000 - 0xfdffffff (0x6100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (0:17:0), (0,3,3), BCTRL: 0x0400 (VGA_EN is cleared)
(II) PCI-to-CardBus bridge:
(II) Bus 4: bridge is at (0:17:1), (0,4,4), BCTRL: 0x0400 (VGA_EN is cleared)
(--) PCI:*(1:0:0) Trident Microsystems CyberBlade XPAi1 rev 130, Mem @ 0xfc000000/25, 0xfbc00000/22, 0xf8000000/25, 0xf7ff8000/15
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf0000000 from 0xffffffff to 0xefffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xf7ebfe00 - 0xf7ebffff (0x200) MX[B]E
	[1] -1	0	0xf7ec0000 - 0xf7efffff (0x40000) MX[B]E
	[2] -1	0	0xf7efd000 - 0xf7efdfff (0x1000) MX[B]E
	[3] -1	0	0xf7efe000 - 0xf7efffff (0x2000) MX[B]E
	[4] -1	0	0xf7eff000 - 0xf7efffff (0x1000) MX[B]E
	[5] -1	0	0xf0000000 - 0xefffffff (0x0) MX[B]EO
	[6] -1	0	0xf7ff8000 - 0xf7ffffff (0x8000) MX[B](B)
	[7] -1	0	0xf8000000 - 0xf9ffffff (0x2000000) MX[B](B)
	[8] -1	0	0xfbc00000 - 0xfbffffff (0x400000) MX[B](B)
	[9] -1	0	0xfc000000 - 0xfdffffff (0x2000000) MX[B](B)
	[10] -1	0	0x0000eb40 - 0x0000eb7f (0x40) IX[B]E
	[11] -1	0	0x0000ed00 - 0x0000edff (0x100) IX[B]E
	[12] -1	0	0x0000eff0 - 0x0000efff (0x10) IX[B]E
(II) PCI Memory resource overlap reduced 0xf7ec0000 from 0xf7efffff to 0xf7edffff
(II) PCI Memory resource overlap reduced 0xf7efe000 from 0xf7efffff to 0xf7efefff
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xf7ebfe00 - 0xf7ebffff (0x200) MX[B]E
	[1] -1	0	0xf7ec0000 - 0xf7edffff (0x20000) MX[B]E
	[2] -1	0	0xf7efd000 - 0xf7efdfff (0x1000) MX[B]E
	[3] -1	0	0xf7efe000 - 0xf7efefff (0x1000) MX[B]E
	[4] -1	0	0xf7eff000 - 0xf7efffff (0x1000) MX[B]E
	[5] -1	0	0xf0000000 - 0xefffffff (0x0) MX[B]EO
	[6] -1	0	0xf7ff8000 - 0xf7ffffff (0x8000) MX[B](B)
	[7] -1	0	0xf8000000 - 0xf9ffffff (0x2000000) MX[B](B)
	[8] -1	0	0xfbc00000 - 0xfbffffff (0x400000) MX[B](B)
	[9] -1	0	0xfc000000 - 0xfdffffff (0x2000000) MX[B](B)
	[10] -1	0	0x0000eb40 - 0x0000eb7f (0x40) IX[B]E
	[11] -1	0	0x0000ed00 - 0x0000edff (0x100) IX[B]E
	[12] -1	0	0x0000eff0 - 0x0000efff (0x10) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xf7ebfe00 - 0xf7ebffff (0x200) MX[B]E
	[6] -1	0	0xf7ec0000 - 0xf7edffff (0x20000) MX[B]E
	[7] -1	0	0xf7efd000 - 0xf7efdfff (0x1000) MX[B]E
	[8] -1	0	0xf7efe000 - 0xf7efefff (0x1000) MX[B]E
	[9] -1	0	0xf7eff000 - 0xf7efffff (0x1000) MX[B]E
	[10] -1	0	0xf0000000 - 0xefffffff (0x0) MX[B]EO
	[11] -1	0	0xf7ff8000 - 0xf7ffffff (0x8000) MX[B](B)
	[12] -1	0	0xf8000000 - 0xf9ffffff (0x2000000) MX[B](B)
	[13] -1	0	0xfbc00000 - 0xfbffffff (0x400000) MX[B](B)
	[14] -1	0	0xfc000000 - 0xfdffffff (0x2000000) MX[B](B)
	[15] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[16] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[17] -1	0	0x0000eb40 - 0x0000eb7f (0x40) IX[B]E
	[18] -1	0	0x0000ed00 - 0x0000edff (0x100) IX[B]E
	[19] -1	0	0x0000eff0 - 0x0000efff (0x10) IX[B]E
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 2.0.2
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.1
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.2
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "trident"
(II) Loading /usr/X11R6/lib/modules/drivers/trident_drv.o
(II) Module trident: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.4
(II) TRIDENT: driver for Trident chipsets: tvga9000, tvga9000i, tvga8900c,
	tvga8900d, tvga9200cxr, tgui9400cxi, cyber9320, cyber9388, cyber9397,
	cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4, tgui9420dgi,
	tgui9440agi, tgui9660, tgui9680, providia9682, providia9685,
	cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d, cyberbladei7,
	cyberbladei7d, cyberbladei1, cyberbladei1d, cyberbladeAi1,
	cyberbladeAi1d, bladeXP, cyberbladeXPAi1
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset cyberbladeXPAi1 found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xf7ebfe00 - 0xf7ebffff (0x200) MX[B]E
	[6] -1	0	0xf7ec0000 - 0xf7edffff (0x20000) MX[B]E
	[7] -1	0	0xf7efd000 - 0xf7efdfff (0x1000) MX[B]E
	[8] -1	0	0xf7efe000 - 0xf7efefff (0x1000) MX[B]E
	[9] -1	0	0xf7eff000 - 0xf7efffff (0x1000) MX[B]E
	[10] -1	0	0xf0000000 - 0xefffffff (0x0) MX[B]EO
	[11] -1	0	0xf7ff8000 - 0xf7ffffff (0x8000) MX[B](B)
	[12] -1	0	0xf8000000 - 0xf9ffffff (0x2000000) MX[B](B)
	[13] -1	0	0xfbc00000 - 0xfbffffff (0x400000) MX[B](B)
	[14] -1	0	0xfc000000 - 0xfdffffff (0x2000000) MX[B](B)
	[15] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[16] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[17] -1	0	0x0000eb40 - 0x0000eb7f (0x40) IX[B]E
	[18] -1	0	0x0000ed00 - 0x0000edff (0x100) IX[B]E
	[19] -1	0	0x0000eff0 - 0x0000efff (0x10) IX[B]E
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xf7ebfe00 - 0xf7ebffff (0x200) MX[B]E
	[6] -1	0	0xf7ec0000 - 0xf7edffff (0x20000) MX[B]E
	[7] -1	0	0xf7efd000 - 0xf7efdfff (0x1000) MX[B]E
	[8] -1	0	0xf7efe000 - 0xf7efefff (0x1000) MX[B]E
	[9] -1	0	0xf7eff000 - 0xf7efffff (0x1000) MX[B]E
	[10] -1	0	0xf0000000 - 0xefffffff (0x0) MX[B]EO
	[11] -1	0	0xf7ff8000 - 0xf7ffffff (0x8000) MX[B](B)
	[12] -1	0	0xf8000000 - 0xf9ffffff (0x2000000) MX[B](B)
	[13] -1	0	0xfbc00000 - 0xfbffffff (0x400000) MX[B](B)
	[14] -1	0	0xfc000000 - 0xfdffffff (0x2000000) MX[B](B)
	[15] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[16] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[17] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[18] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[19] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[20] -1	0	0x0000eb40 - 0x0000eb7f (0x40) IX[B]E
	[21] -1	0	0x0000ed00 - 0x0000edff (0x100) IX[B]E
	[22] -1	0	0x0000eff0 - 0x0000efff (0x10) IX[B]E
	[23] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[24] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) TRIDENT(0): Depth 24, (--) framebuffer bpp 32
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.6
(II) TRIDENT(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.6
(==) TRIDENT(0): RGB weight 888
(==) TRIDENT(0): Default visual is TrueColor
(==) TRIDENT(0): Using gamma correction (1.0, 1.0, 1.0)
(==) TRIDENT(0): Linear framebuffer at 0xFC000000
(--) TRIDENT(0): IO registers at 0xFBC00000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.1.0
	ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) TRIDENT(0): initializing int10
(==) TRIDENT(0): Write-combining range (0xa0000,0x20000) was already clear
(==) TRIDENT(0): Write-combining range (0xc0000,0x40000) was already clear
(II) TRIDENT(0): Primary V_BIOS segment is: 0xc000
(==) TRIDENT(0): Write-combining range (0x0,0x1000) was already clear
(II) TRIDENT(0): VESA BIOS detected
(II) TRIDENT(0): VESA VBE Version 2.0
(II) TRIDENT(0): VESA VBE Total Mem: 16384 kB
(II) TRIDENT(0): VESA VBE OEM: Trident CYBER 8820
(II) TRIDENT(0): VESA VBE OEM Software Rev: 2.0
(II) TRIDENT(0): VESA VBE OEM Vendor: TRIDENT MICROSYSTEMS INC.
(II) TRIDENT(0): VESA VBE OEM Product: CYBER 8820
(II) TRIDENT(0): VESA VBE OEM Product Rev: KTT 7.1 (13.19)  
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
f000:386d: 01 ILLEGAL EXTENDED X86 OPCODE!
(II) TRIDENT(0): VESA VBE DDC not supported
(==) TRIDENT(0): Write-combining range (0x0,0x1000) was already clear
(==) TRIDENT(0): Write-combining range (0xfbc00000,0x20000) was already clear
(--) TRIDENT(0): Revision is 131
(--) TRIDENT(0): Found CyberBladeXPAi1 chip
(--) TRIDENT(0): RAM type is SGRAM
(--) TRIDENT(0): Using HW cursor
(--) TRIDENT(0): VideoRAM: 16384 kByte
(--) TRIDENT(0): TFT Panel 1024x768 found
(--) TRIDENT(0): Memory Clock is 60.00 MHz
(==) TRIDENT(0): Min pixel clock is 12 MHz
(--) TRIDENT(0): Max pixel clock is 115 MHz
(II) TRIDENT(0): Monitor0: Using hsync range of 31.50-64.30 kHz
(II) TRIDENT(0): Monitor0: Using vrefresh range of 50.00-100.00 Hz
(II) TRIDENT(0): Clock range:  12.00 to 115.00 MHz
(II) TRIDENT(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1024x768" (hsync out of range)
(II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Removing mode (1152x864) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1152x864" (unknown reason)
(II) TRIDENT(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Removing mode (1280x960) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1280x960" (unknown reason)
(II) TRIDENT(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Removing mode (1280x1024) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1280x1024" (unknown reason)
(II) TRIDENT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Removing mode (1152x768) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1152x768" (unknown reason)
(II) TRIDENT(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Removing mode (1600x1024) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1600x1024" (unknown reason)
(II) TRIDENT(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(--) TRIDENT(0): Virtual size is 1024x768 (pitch 1024)
(**) TRIDENT(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) TRIDENT(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
(**) TRIDENT(0):  Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) TRIDENT(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync
(**) TRIDENT(0):  Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) TRIDENT(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) TRIDENT(0):  Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) TRIDENT(0): Modeline "1024x768"   44.90  1024 1032 1208 1264  768 768 776 817 interlace +hsync +vsync
(**) TRIDENT(0):  Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) TRIDENT(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
(**) TRIDENT(0):  Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) TRIDENT(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) TRIDENT(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) TRIDENT(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(**) TRIDENT(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) TRIDENT(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) TRIDENT(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) TRIDENT(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) TRIDENT(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) TRIDENT(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) TRIDENT(0):  Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) TRIDENT(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(**) TRIDENT(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) TRIDENT(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) TRIDENT(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) TRIDENT(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 520 -hsync -vsync
(**) TRIDENT(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) TRIDENT(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) TRIDENT(0):  Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) TRIDENT(0): Modeline "720x400"   35.50  720 756 828 936  400 401 404 446 -hsync +vsync
(**) TRIDENT(0):  Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) TRIDENT(0): Modeline "640x400"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
(**) TRIDENT(0):  Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) TRIDENT(0): Modeline "640x350"   31.50  640 672 736 832  350 382 385 445 +hsync -vsync
(==) TRIDENT(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.2.0
	ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.1.0
	ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xf7ff8000 - 0xf7ffffff (0x8000) MX[B]
	[1] 0	0	0xf8000000 - 0xf9ffffff (0x2000000) MX[B]
	[2] 0	0	0xfbc00000 - 0xfbffffff (0x400000) MX[B]
	[3] 0	0	0xfc000000 - 0xfdffffff (0x2000000) MX[B]
	[4] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[5] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[6] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[7] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[8] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[9] -1	0	0xf7ebfe00 - 0xf7ebffff (0x200) MX[B]E
	[10] -1	0	0xf7ec0000 - 0xf7edffff (0x20000) MX[B]E
	[11] -1	0	0xf7efd000 - 0xf7efdfff (0x1000) MX[B]E
	[12] -1	0	0xf7efe000 - 0xf7efefff (0x1000) MX[B]E
	[13] -1	0	0xf7eff000 - 0xf7efffff (0x1000) MX[B]E
	[14] -1	0	0xf0000000 - 0xefffffff (0x0) MX[B]EO
	[15] -1	0	0xf7ff8000 - 0xf7ffffff (0x8000) MX[B](B)
	[16] -1	0	0xf8000000 - 0xf9ffffff (0x2000000) MX[B](B)
	[17] -1	0	0xfbc00000 - 0xfbffffff (0x400000) MX[B](B)
	[18] -1	0	0xfc000000 - 0xfdffffff (0x2000000) MX[B](B)
	[19] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[20] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[21] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[22] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[23] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[24] -1	0	0x0000eb40 - 0x0000eb7f (0x40) IX[B]E
	[25] -1	0	0x0000ed00 - 0x0000edff (0x100) IX[B]E
	[26] -1	0	0x0000eff0 - 0x0000efff (0x10) IX[B]E
	[27] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[28] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) TRIDENT(0): Write-combining range (0xa0000,0x10000) was already clear
(==) TRIDENT(0): Write-combining range (0xfbc00000,0x20000) was already clear
(==) TRIDENT(0): Write-combining range (0xfc000000,0x1000000)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/libint10.a
(II) TRIDENT(0): Initializing int10
(==) TRIDENT(0): Write-combining range (0xa0000,0x20000) was already clear
(II) TRIDENT(0): Primary V_BIOS segment is: 0xc000
(==) TRIDENT(0): Write-combining range (0x0,0x1000) was already clear
(II) TRIDENT(0): Overriding Horizontal timings.
(II) TRIDENT(0): Shadow off
(II) TRIDENT(0): H-timing shadow registers: 0xa3           0x00 0x84 0x94
(II) TRIDENT(0): H-timing registers:        0xa3 0x7f 0x7f 0x00 0x84 0x94
(II) TRIDENT(0): V-timing shadow registers: 0x24 0xf5 0x03 0x09           0x24 (0x08)
(II) TRIDENT(0): V-timing registers:        0x24 0xf5 0x03 0x09 0xff 0x00 0x24
(II) TRIDENT(0): Setting BIOS Mode Regs: 3b 63
(II) TRIDENT(0): Found Clock  65.00 n=219 m=23 k=1
(II) TRIDENT(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Solid Horizontal and Vertical Lines
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		10 256x256 slots
(==) TRIDENT(0): Backing store disabled
(==) TRIDENT(0): Silken mouse enabled
(II) TRIDENT(0): Trident Video Flags: VID_ZOOM_INV  VID_OFF_SHIFT_4
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "PS/2"
(**) Mouse0: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/psm0"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse0: Buttons: 3
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(WW) fcntl(7, O_ASYNC): Inappropriate ioctl for device
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
(II) 3rd Button detected: disabling emulate3Button

--=-=-=--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?wp8ythgniu.fsf>