From owner-freebsd-questions Sun Jan 26 07:40:57 1997 Return-Path: Received: (from root@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id HAA12631 for questions-outgoing; Sun, 26 Jan 1997 07:40:57 -0800 (PST) Received: from netcom5.netcom.com (stanb@netcom5.netcom.com [192.100.81.113]) by freefall.freebsd.org (8.8.5/8.8.5) with SMTP id HAA12626 for ; Sun, 26 Jan 1997 07:40:55 -0800 (PST) Received: (from stanb@localhost) by netcom5.netcom.com (8.6.13/Netcom) id KAA28111; Sun, 26 Jan 1997 10:40:53 -0500 From: stanb@netcom.com (Stan Brown) Message-Id: <199701261540.KAA28111@netcom5.netcom.com> Subject: Can't access my ATAPI CDROM after upgrade to 2.2 BETA To: freebsd-questions@freebsd.com (Free BSD Questions list) Date: Sun, 26 Jan 1997 10:40:53 -0500 (EST) X-Mailer: ELM [version 2.4 PL24] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk When I try to mount my CD now I get "Device not configured" I have recently upgraded to 2.2 BETA from 2.1.5 Bootiung from the .2 install disk it is found, but not booting from the hard disk. Here are what I think are the relevant lines from my kernel config file: controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus device wcd0 #IDE CD-ROM controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr controller aic0 at isa? port 0x340 bio irq 11 vector aicintr I have done sh MAKDEV wdc in the /dev directory. What should I check next please? -- Stan Brown stanb@netcom.com 404-996-6955 Factory Automation Systems Atlanta Ga. -- Look, look, see Windows 95. Buy, lemmings, buy! Pay no attention to that cliff ahead... Henry Spencer (c) 1997 Stan Brown. Redistribution via the Microsoft Network is prohibited.