Date: Thu, 7 Sep 2006 14:10:19 +0000 (GMT) From: =?iso-8859-1?q?Julien=20Abeill=E9?= <julienabeille@yahoo.fr> To: John Hay <jhay@meraka.org.za>, freebsd-net@freebsd.org Subject: Re : ipv6 host routes Message-ID: <20060907141019.91998.qmail@web26604.mail.ukl.yahoo.com> In-Reply-To: <20060907100944.GA68587@zibbi.meraka.csir.co.za>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi John,
I use v6 hosts routes on FreeBSD 4.11. The main purpose for me is through ipv6 in ipv6 tunnels, so it is different.
I tried to install host routes as you do:
In your case rtr2 and rtrg seem to be on the same prefix. In this case the prefix route is enough, but if you want to add a host route, indeed the route command does not work:
If i do not add a host route, but use the prefix route, the machine sending traffic (rtrg) will make a neighbor sollicitation, then get a neighbor adv, and add the entry in the routing table with the correct interface and the correct gateway MAC address (rtr2 MAC address).
If i add a host route, I have the same entry excepty that the gateway MAC address is my MAC address (rtrg)
To solve that, I do not add a route with route, but: add the v6 address of the destination in /etc/hosts,
then:
ndp -s <hostname> <MAC address of the host>. Then the route is correctly added to the routing table.
I hope it works for you and you have the MAC address of the destination but still I find the behavior of the route command in this case strange.
Best regards,
Julien
----- Message d'origine ----
De : John Hay <jhay@meraka.org.za>
À : freebsd-net@freebsd.org
Cc : gnn@freebsd.org
Envoyé le : Jeudi, 7 Septembre 2006, 12h09mn 44s
Objet : Re: ipv6 host routes
Ok, I still have no joy adding an IPv6 route. Can anybody tell me what I
do wrong?
What I understand from the route(8) man page is that this command should
work:
route add -inet6 rtr2 rtrg -interface
Where rtr2 is the destination address and rtrg is my address on the
interface that rtr2 is connected to.
I have the following lines in my /etc/hosts file:
2001:4200:7000:15:202:6fff:fe22:9547 rtrg
2001:4200:7000:15:202:6fff:fe41:1927 rtr2
When I do the route add command the kernel prints this message:
nd6_rtrequest: bad gateway value: ath0
Ifconfig of the interface looks ok to me:
ifconfig ath0
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::202:6fff:fe22:9547%ath0 prefixlen 64 scopeid 0x3
inet6 2001:4200:7000:15:202:6fff:fe22:9547 prefixlen 64
inet6 2001:4200:7000:15:: prefixlen 64 anycast
ether 00:02:6f:22:95:47
media: IEEE 802.11 Wireless Ethernet autoselect <adhoc> (autoselect <adhoc>)
status: associated
ssid koppiemesh channel 149 bssid 02:02:6f:22:95:47
authmode OPEN privacy OFF txpowmax 24 bmiss 7 burst bintval 100
After the route add, this new entry arrived in the routing table according
to:
netstat -rnf inet6
2001:4200:7000:15:202:6fff:fe41:1927 2001:4200:7000:15:202:6fff:fe22:9547 UHS
ath0
I looked with ndp -a, but nothing was added there.
Anybody got any ideas? This is the last part of getting olsrd to work
properly on FreeBSD using IPv6.
John
--
John Hay -- John.Hay@meraka.csir.co.za / jhay@FreeBSD.org
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060907141019.91998.qmail>