Date: Tue, 23 Nov 2010 15:25:06 -0800 From: Andrew Moran <amoran@forsythia.net> To: freebsd-questions@freebsd.org, freebsd-current@freebsd.org Subject: msk0 interface stops working when downloading Message-ID: <7EA93980-478A-418A-8FB1-3249097A7011@forsythia.net>
next in thread | raw e-mail | index | archive | help
Hey guys, After banging my head against this for a few hours, I've decided to ask = for help. I installed FreeBSD 8.1 amd64 on a Shuttle J1 4100 system = (tech specs here http://us.shuttle.com/J1_4100.aspx). I installed from = DVD and the install went fine. I notice when I pkg_add -r anything, the network stops responding.=20 Some details: 1) I can reproduce it 100% by downloading a large file. low traffic = like the SSH connection does not trigger it. I think it's being = triggered by traffic above a certain rate.=20 2) I can recover by restarting the network interfaces (/etc/rc.d/netif = stop; /etc/rc.d/netif start) 3) I see no errors in dmesg or /var/log/messages. Nothing at all. 4) I've tried the following in /etc/sysctl.conf: net.inet.tcp.tso=3D0 net.inet.tcp.inflight.enable=3D0 and in /boot/loader.conf: hw.pci.enable_msix=3D"0" hw.pci.enable_msi=3D"0" hw.bce.tso_enable=3D"0" But the problem persists. The interface is identified as: mskc0: <Marvell Yukon 88E8057 Gigabit Ethernet> port 0xe800-0xe8ff mem = 0xfebfc000-0xfebfffff irq 17 at device 0.0 on pci2 msk0: <Marvell Technology Group Ltd. Yukon Ultra 2 Id 0xba Rev 0x00> on = mskc0 msk0: Ethernet address: 80:ee:73:01:60:7d miibus0: <MII bus> on msk0 e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, = 1000baseT-FDX, auto mskc0: [ITHREAD] Does anyone know what could be causing this or how I can resolve it? = Any help is appreciated, thanks. --Andy=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7EA93980-478A-418A-8FB1-3249097A7011>