Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 28 Feb 2012 13:19:34 +0000 (UTC)
From:      Gavin Atkinson <gavin@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org
Subject:   svn commit: r232250 - in head: sbin/ifconfig sbin/ipfw share/man/man4 sys/conf sys/dev/ath sys/dev/siba sys/ia64/ia64 sys/mips/rt305x
Message-ID:  <201202281319.q1SDJYiH072336@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: gavin
Date: Tue Feb 28 13:19:34 2012
New Revision: 232250
URL: http://svn.freebsd.org/changeset/base/232250

Log:
  Correct capitalization of "Hz" in user-visible text (manpages, printf(),
  etc).
  
  MFC after:	3 days

Modified:
  head/sbin/ifconfig/ifconfig.8
  head/sbin/ipfw/ipfw.8
  head/share/man/man4/ath.4
  head/share/man/man4/net80211.4
  head/sys/conf/NOTES
  head/sys/dev/ath/if_ath_sysctl.c
  head/sys/dev/siba/siba_core.c
  head/sys/ia64/ia64/machdep.c
  head/sys/mips/rt305x/rt305x_sysctl.c

Modified: head/sbin/ifconfig/ifconfig.8
==============================================================================
--- head/sbin/ifconfig/ifconfig.8	Tue Feb 28 11:06:52 2012	(r232249)
+++ head/sbin/ifconfig/ifconfig.8	Tue Feb 28 13:19:34 2012	(r232250)
@@ -1036,7 +1036,7 @@ Enable Dynamic Frequency Selection (DFS)
 DFS embodies several facilities including detection of overlapping
 radar signals, dynamic transmit power control, and channel selection
 according to a least-congested criteria.
-DFS support is mandatory for some 5Ghz frequencies in certain
+DFS support is mandatory for some 5GHz frequencies in certain
 locales (e.g. ETSI).
 By default DFS is enabled according to the regulatory definitions
 specified in /etc/regdomain.xml and the current country code, regdomain,
@@ -1091,7 +1091,7 @@ By default DTIM is 1 (i.e., DTIM occurs 
 .It Cm quiet
 Enable the use of quiet IE.  Hostap will use this to silent other
 stations to reduce interference for radar detection when
-operating on 5Ghz frequency and doth support is enabled.
+operating on 5GHz frequency and doth support is enabled.
 Use
 .Fl quiet
 to disable this functionality.

Modified: head/sbin/ipfw/ipfw.8
==============================================================================
--- head/sbin/ipfw/ipfw.8	Tue Feb 28 11:06:52 2012	(r232249)
+++ head/sbin/ipfw/ipfw.8	Tue Feb 28 13:19:34 2012	(r232250)
@@ -2235,7 +2235,7 @@ specifies the scheduling algorithm to us
 is just a FIFO scheduler (which means that all packets
 are stored in the same queue as they arrive to the scheduler).
 FIFO has O(1) per-packet time complexity, with very low
-constants (estimate 60-80ns on a 2Ghz desktop machine)
+constants (estimate 60-80ns on a 2GHz desktop machine)
 but gives no service guarantees.
 .It Cm wf2qp
 implements the WF2Q+ algorithm, which is a Weighted Fair Queueing

Modified: head/share/man/man4/ath.4
==============================================================================
--- head/share/man/man4/ath.4	Tue Feb 28 11:06:52 2012	(r232249)
+++ head/share/man/man4/ath.4	Tue Feb 28 13:19:34 2012	(r232250)
@@ -95,8 +95,8 @@ with transmit speeds appropriate to each
 AR5416-class devices are capable of 802.11n operation
 but are supported only in legacy modes (802.11a, 11b, 11g).
 Most chips also support an Atheros Turbo Mode (TM) that operates in
-the 5Ghz frequency range with 2x the transmit speeds.
-Some chips also support Turbo mode in the 2.4Ghz range with 802.11g
+the 5GHz frequency range with 2x the transmit speeds.
+Some chips also support Turbo mode in the 2.4GHz range with 802.11g
 though this support is not presently available due to regulatory requirements.
 (Note that Turbo modes are, however,
 only interoperable with other Atheros-based devices.)

Modified: head/share/man/man4/net80211.4
==============================================================================
--- head/share/man/man4/net80211.4	Tue Feb 28 11:06:52 2012	(r232249)
+++ head/share/man/man4/net80211.4	Tue Feb 28 13:19:34 2012	(r232250)
@@ -280,7 +280,7 @@ Return whether or not Dynamic Frequency 
 DFS embodies several facilities including detection of overlapping
 radar signals, dynamic transmit power control, and channel selection
 according to a least-congested criteria.
-DFS support is mandatory for some 5Ghz frequencies in certain
+DFS support is mandatory for some 5GHz frequencies in certain
 locales (e.g. ETSI).
 By default DFS is enabled according to the regulatory definitions
 and the current country code, regdomain, and channel.

Modified: head/sys/conf/NOTES
==============================================================================
--- head/sys/conf/NOTES	Tue Feb 28 11:06:52 2012	(r232249)
+++ head/sys/conf/NOTES	Tue Feb 28 13:19:34 2012	(r232250)
@@ -2417,11 +2417,11 @@ device		cmx
 # or
 # options 	BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC
 # Specifies the default video capture mode.
-# This is required for Dual Crystal (28&35Mhz) boards where PAL is used
+# This is required for Dual Crystal (28&35MHz) boards where PAL is used
 # to prevent hangs during initialization, e.g. VideoLogic Captivator PCI.
 #
 # options 	BKTR_USE_PLL
-# This is required for PAL or SECAM boards with a 28Mhz crystal and no 35Mhz
+# This is required for PAL or SECAM boards with a 28MHz crystal and no 35MHz
 # crystal, e.g. some new Bt878 cards.
 #
 # options 	BKTR_GPIO_ACCESS

Modified: head/sys/dev/ath/if_ath_sysctl.c
==============================================================================
--- head/sys/dev/ath/if_ath_sysctl.c	Tue Feb 28 11:06:52 2012	(r232249)
+++ head/sys/dev/ath/if_ath_sysctl.c	Tue Feb 28 13:19:34 2012	(r232250)
@@ -912,7 +912,7 @@ ath_sysctl_hal_attach(struct ath_softc *
 	sc->sc_ah->ah_config.ah_ar5416_biasadj = 0;
 	SYSCTL_ADD_INT(ctx, child, OID_AUTO, "ar5416_biasadj", CTLFLAG_RW,
 	    &sc->sc_ah->ah_config.ah_ar5416_biasadj, 0,
-	    "Enable 2ghz AR5416 direction sensitivity bias adjust");
+	    "Enable 2GHz AR5416 direction sensitivity bias adjust");
 
 	sc->sc_ah->ah_config.ah_dma_beacon_response_time = 2;
 	SYSCTL_ADD_INT(ctx, child, OID_AUTO, "dma_brt", CTLFLAG_RW,

Modified: head/sys/dev/siba/siba_core.c
==============================================================================
--- head/sys/dev/siba/siba_core.c	Tue Feb 28 11:06:52 2012	(r232249)
+++ head/sys/dev/siba/siba_core.c	Tue Feb 28 13:19:34 2012	(r232250)
@@ -1207,7 +1207,7 @@ siba_cc_pmu0_pll0_init(struct siba_cc *s
 	if (((pmu & SIBA_CC_PMUCTL_XF) >> 2) == e->xf)
 		return;
 
-	DPRINTF(siba, SIBA_DEBUG_PLL, "change PLL value to %u.%03u mhz\n",
+	DPRINTF(siba, SIBA_DEBUG_PLL, "change PLL value to %u.%03u MHz\n",
 	    (xtalfreq / 1000), (xtalfreq % 1000));
 
 	KASSERT(siba->siba_chipid == 0x4328 || siba->siba_chipid == 0x5354,

Modified: head/sys/ia64/ia64/machdep.c
==============================================================================
--- head/sys/ia64/ia64/machdep.c	Tue Feb 28 11:06:52 2012	(r232249)
+++ head/sys/ia64/ia64/machdep.c	Tue Feb 28 13:19:34 2012	(r232250)
@@ -245,7 +245,7 @@ identifycpu(void)
 
 	printf("CPU: %s (", model_name);
 	if (cpu_freq)
-		printf("%u Mhz ", cpu_freq);
+		printf("%u MHz ", cpu_freq);
 	printf("%s)\n", family_name);
 	printf("  Origin = \"%s\"  Revision = %d\n", vendor, revision);
 	printf("  Features = 0x%b\n", (u_int32_t) features,

Modified: head/sys/mips/rt305x/rt305x_sysctl.c
==============================================================================
--- head/sys/mips/rt305x/rt305x_sysctl.c	Tue Feb 28 11:06:52 2012	(r232249)
+++ head/sys/mips/rt305x/rt305x_sysctl.c	Tue Feb 28 13:19:34 2012	(r232250)
@@ -84,7 +84,7 @@ rt305x_sysctl_dump_config(device_t dev)
 	if ( val & SYSCTL_SYSCFG_BIG_ENDIAN)
 		printf("\tBig Endian\n");
 	if ( val & SYSCTL_SYSCFG_CPU_CLK_SEL_384MHZ)
-		printf("\tClock is 384Mhz\n");
+		printf("\tClock is 384MHz\n");
 	printf("\tBoot from %u\n",
 	    ((val & SYSCTL_SYSCFG_BOOT_FROM_MASK) >> 
 		SYSCTL_SYSCFG_BOOT_FROM_SHIFT));
@@ -109,7 +109,7 @@ rt305x_sysctl_dump_config(device_t dev)
 		printf("\tI2S clock is enabled\n");
 	printf("\tI2S clock is %s\n", 
 	    (val & SYSCTL_CLKCFG1_I2S_CLK_SEL_EXT)?
-		"external":"internal 15.625Mhz");
+		"external":"internal 15.625MHz");
 	printf("\tI2S clock divider %u\n",
 	    ((val & SYSCTL_CLKCFG1_I2S_CLK_DIV_MASK) >> 
 		SYSCTL_CLKCFG1_I2S_CLK_DIV_SHIFT));
@@ -118,7 +118,7 @@ rt305x_sysctl_dump_config(device_t dev)
 
 	printf("\tPCM clock is %s\n", 
 	    (val & SYSCTL_CLKCFG1_PCM_CLK_SEL_EXT)?
-		"external":"internal 15.625Mhz");
+		"external":"internal 15.625MHz");
 	printf("\tPCM clock divider %u\n",
 	    ((val & SYSCTL_CLKCFG1_PCM_CLK_DIV_MASK) >> 
 		SYSCTL_CLKCFG1_PCM_CLK_DIV_SHIFT));



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201202281319.q1SDJYiH072336>