Date: Sun, 16 Jul 2006 00:59:59 +0200 From: Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no> To: freebsd-mobile@freebsd.org Subject: Re: Acer Aspire AS5672 - network card not properly detected Message-ID: <20060716005959.14b36afa.torfinn.ingolfsen@broadpark.no> In-Reply-To: <20060716005759.91ad0389.torfinn.ingolfsen@broadpark.no> References: <20060715041049.37eabc74.torfinn.ingolfsen@broadpark.no> <20060716005759.91ad0389.torfinn.ingolfsen@broadpark.no>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--Boundary_(ID_pwwWHY5pYIkF6Av5LfH5YA)
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT
On Sun, 16 Jul 2006 00:57:59 +0200
Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no> wrote:
> able to get an updated /usr/src onto the machine, which now runs
> FreeBSD 6.1-stable. New dmesg attached. It still fails to attach the
Damn! Of course I forgot to attch the new dmesg output. Here it is.
--
Torfinn
--Boundary_(ID_pwwWHY5pYIkF6Av5LfH5YA)
Content-type: text/plain; name=kg-home-dmesg-6.1-stable-20060715.txt
Content-transfer-encoding: 7BIT
Content-disposition: attachment; filename=kg-home-dmesg-6.1-stable-20060715.txt
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-STABLE #0: Sat Jul 15 19:29:16 CEST 2006
root@kg-home.kg4.no:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Genuine Intel(R) CPU T2250 @ 1.73GHz (1733.41-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8
Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xc189<SSE3,MON,EST,TM2,<b14>,<b15>>
AMD Features=0x100000<NX>
Cores per package: 2
real memory = 2145910784 (2046 MB)
avail memory = 2095075328 (1998 MB)
ACPI APIC Table: <INTEL CALISTGA>
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <PTLTD RSDT> on motherboard
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc63d92a0 StartNode 0xc63d92a0 ReturnNode 0
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc63d9000 StartNode 0xc63d9000 ReturnNode 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
unknown: I/O range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
bge0: <Broadcom BCM5789 Gigabit Ethernet, ASIC rev. 0x4201> irq 18 at device 0.0 on pci4
bge0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffff).
bge0: couldn't map memory
device_attach: bge0 attach returned 6
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib5
uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1860-0x187f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xc8004000-0xc80043ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ugen0: OEM Camera, rev 2.00/1.00, addr 2
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci10: <ACPI PCI bus> on pcib6
cbb0: <PCI-CardBus Bridge> mem 0xc8404000-0xc8404fff irq 20 at device 9.0 on pci10
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xc8405000-0xc84057ff,0xc8400000-0xc8403fff irq 20 at device 9.1 on pci10
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:c0:9f:00:00:9a:84:d3
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:c0:9f:9a:84:d3
fwe0: Ethernet address: 02:c0:9f:9a:84:d3
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci10: <mass storage> at device 9.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sio0 port 0x2f8-0x2ff,0x6f8-0x6ff irq 3 drq 3 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xdf800-0xdffff,0xe0000-0xe17ff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1733407572 Hz quality 800
Timecounters tick every 1.000 msec
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc63d92a0 StartNode 0xc63d92a0 ReturnNode 0
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc63d91a0), AE_NOT_FOUND
ad0: 114473MB <SAMSUNG HM120JI YF100-10> at ata0-master UDMA33
acd0: DVDR <MATSHITADVD-RAM UJ-845S/D201> at ata1-master UDMA33
Trying to mount root from ufs:/dev/ad0s3a
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc63d92a0 StartNode 0xc63d92a0 ReturnNode 0
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc63d91a0), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc63d92a0 StartNode 0xc63d92a0 ReturnNode 0
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc63d91a0), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc63d92a0 StartNode 0xc63d92a0 ReturnNode 0
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc63d91a0), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc63d92a0 StartNode 0xc63d92a0 ReturnNode 0
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc63d91a0), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc63d92a0 StartNode 0xc63d92a0 ReturnNode 0
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc63d91a0), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc63d92a0 StartNode 0xc63d92a0 ReturnNode 0
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc63d91a0), AE_NOT_FOUND
--Boundary_(ID_pwwWHY5pYIkF6Av5LfH5YA)--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060716005959.14b36afa.torfinn.ingolfsen>