Date: Thu, 01 Apr 1999 07:32:21 -0600 From: Jason McNew <jase@clearsail.net> To: stable@freebsd.org Subject: SCSI problem this morning Message-ID: <37037565.D4E1F0DB@clearsail.net>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------E591BA8549CC69E41981C0B0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
I had errors this morning with a world and kernel built last night. I
was doing cd /usr/ports/x11/kde at the time. I've attached my dmesg
output. Any ideas?
--------------E591BA8549CC69E41981C0B0
Content-Type: text/plain; charset=us-ascii;
name="scsiproblem"
Content-Disposition: inline;
filename="scsiproblem"
Content-Transfer-Encoding: 7bit
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.1-STABLE #10: Thu Apr 1 07:07:35 CST 1999
root@jase.clearsail.net:/usr/src/sys/compile/JASE
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (333.11-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x580 Stepping=0
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67043328 (65472K bytes)
avail memory = 62316544 (60856K bytes)
Preloaded elf kernel "kernel" at 0xf02c2000.
Probing for devices on PCI bus 0:
chip0: <VIA 82C597 (Apollo VP3) system controller> rev 0x04 on pci0.0.0
chip1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI bridge> rev 0x00 on pci0.1.0
chip2: <VIA 82C586 PCI-ISA bridge> rev 0x41 on pci0.7.0
ide_pci0: <VIA 82C586x (Apollo) Bus-master IDE controller> rev 0x06 on pci0.7.1
chip3: <VIA 82C586B ACPI interface> rev 0x10 on pci0.7.3
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> rev 0x00 int a irq 10 on pci0.9.0
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
vga0: <ATI model 4750 graphics accelerator> rev 0x5c int a irq 11 on pci0.10.0
Probing for devices on PCI bus 1:
Probing for PnP devices:
CSN 1 Vendor ID: CTL00e4 [0xe4008c0e] Serial 0x1fa5f6cc Comp ID: PNPb02f [0x2fb0d041]
pcm1 (SB16pnp <SB16 PnP> sn 0x1fa5f6cc) at 0x220-0x22f irq 5 drq 1 flags 0x15 on isa
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt-265957648: this driver is deprecated; use ppbus instead.
pcm0 not probed due to I/O address conflict with pcm1 at 0x220
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 not found at 0x3f0
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <Maxtor 83500D4>
wd0: 3339MB (6838965 sectors), 7237 cyls, 15 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <CD-RW CRX100E/1.0j>, removable, accel, dma, iordis
acd0: drive speed 4134KB/sec, 1024KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA, packet track
acd0: supported write types: CD-R, CD-RW, test write
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-R 120mm data disc loaded, unlocked
wdc1: unit 1 (atapi): <FX001DE/B05>, removable, intr, iordis
acd1: drive speed 689KB/sec, 256KB cache
acd1: supported read types:
acd1: Audio: play, 255 volume levels
acd1: Mechanism: ejectable tray
acd1: Medium: CD-R blank medium, unlocked
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, unlimited logging
Waiting 2 seconds for SCSI devices to settle
changing root device to wd0s2a
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST39102LW 0004> Fixed Direct Access SCSI-2 device
da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
(da0:ahc0:0:0:0): SCB 0xa - timed out in datain phase, SEQADDR == 0x86
(da0:ahc0:0:0:0): BDR message in message buffer
(da0:ahc0:0:0:0): SCB 0xa - timed out in datain phase, SEQADDR == 0x86
(da0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 5 SCBs aborted
ahc0: Signaled a Target Abort
(da0:ahc0:0:0:0): SCB 0xa - timed out in datain phase, SEQADDR == 0x2
(da0:ahc0:0:0:0): SCB 10: Immediate reset. Flags = 0x4040
(da0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 5 SCBs aborted
--------------E591BA8549CC69E41981C0B0--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?37037565.D4E1F0DB>