Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 3 Dec 2012 19:10:37 +0100
From:      Hans Petter Selasky <hselasky@c2i.net>
To:        freebsd-usb@freebsd.org
Cc:        Volodymyr Kostyrko <c.kworr@gmail.com>
Subject:   Re: run(4) needs clarification
Message-ID:  <201212031910.37071.hselasky@c2i.net>
In-Reply-To: <50BCC386.9060002@gmail.com>
References:  <50BCC386.9060002@gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Monday 03 December 2012 16:21:42 Volodymyr Kostyrko wrote:
> Hi all.
> 
> As per man page run driver supports DWA-140, but I currently obtained
> one piece that identifies as:
> 
> # usbconfig -d 0.2 dump_device_desc
> ugen0.2: <11n Adapter D-Link> at usbus0, cfg=0 md=HOST spd=HIGH
> (480Mbps) pwr=ON
> 
>    bLength = 0x0012
>    bDescriptorType = 0x0001
>    bcdUSB = 0x0200
>    bDeviceClass = 0x0000
>    bDeviceSubClass = 0x0000
>    bDeviceProtocol = 0x0000
>    bMaxPacketSize0 = 0x0040
>    idVendor = 0x2001
>    idProduct = 0x3c15
>    bcdDevice = 0x0101
>    iManufacturer = 0x0001  <D-Link>
>    iProduct = 0x0002  <11n Adapter>
>    iSerialNumber = 0x0003  <1.0>
>    bNumConfigurations = 0x0001
> 
> After patching kernel to make it detectable I got this:
> 
> Dec  3 17:15:17 ar1l0u kernel: run0: <D-Link 11n Adapter, class 0/0, rev
> 2.00/1.01, addr 2> on usbus0
> Dec  3 17:15:17 ar1l0u kernel: run0: MAC/BBP RT5392 (rev 0x0222), RF
> unknown (MIMO 2T2R), address 84:c9:b2:82:8f:ba
> 
> And chip RT5392 is not supported yet.
> 
> This one is:
> 
> H/W Ver.: B3       F/W Ver.: 2.00
> 
> Can anyone update man page to explicitly state that only ver. A* is
> supposed to work?

Send a patch for the man-page and I'll commit.

--HPS



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201212031910.37071.hselasky>