Date: Tue, 5 Mar 1996 10:09:01 -0500 (EST) From: "Jeff Wheat" <jeff@tad.cetlink.net> To: dwhite@resnet.uoregon.edu Cc: questions@freebsd.org Subject: Re: Soundblaster CD-ROMs Message-ID: <199603051509.KAA10182@tad.cetlink.net> In-Reply-To: <Pine.BSF.3.91.960304175439.28342H-100000@riley-net170-164.uoregon.edu> from "Doug White" at Mar 4, 96 05:55:27 pm
next in thread | previous in thread | raw e-mail | index | archive | help
> > > > Though my Soundblaster 16 has an IDE interface, which uses the same settings > > as a secondary IDE controller... I have also been unsuccessful in accessing > > my cdrom ever since I upgraded to 2.2-SNAP (both so far)... > > That is ATAPI, not matcd. You'll have to get that working to use your CD. > > Don't ask me how though -- I went the easy way with SCSI. > I now have my cdrom drive set as master, on the primary IDE controller. The other drives in the system are SCSI attached to an AHA1542 controller. The soundblaster card has it's IDE interface disabled. Running under all of the 2.2-SNAPshots to date have left me unable to use my cdrom drive at all. With the 2.2-960226-SNAP, any accesses to the sound card cause the machine to either hang, or panic (dies too quick to catch the error). I understand that the SNAPS are supposed to be untested and unstable, though I wonder why things that worked under 2.1-Release are now utterly busted. Can anyone offer any insight on this? -jeff Here's my config file (stuff deleted) options "CD9660" #ISO 9660 filesystem controller isa0 controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 options ATAPI #Enable ATAPI support for IDE bus device wcd0 options SBC_IRQ=5 #PAS-16. Must match irq on sb0 line. controller snd0 device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr device sbxvi0 at isa? drq 7 device sbmidi0 at isa? port 0x300 device opl0 at isa? port 0x388 conflicts
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199603051509.KAA10182>