Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 23 Jan 2001 17:45:58 +1100
From:      "Geoffrey Crompton (RMIT Guest)" <ghcrompton@gecko.eric.net.au>
To:        freebsd-stable@freebsd.org
Subject:   hard read errors
Message-ID:  <20010123174558.A427@gecko.eric.net.au>

next in thread | raw e-mail | index | archive | help

--tThc/1wpZn/ma/RB
Content-Type: text/plain; charset=us-ascii

  I'm getting many hard read errors on a machine. I had these errors
back in 4.1.1, and still in 4.2. A section of /var/log/messages says:

Jan 23 17:12:44 ipv6-gw /kernel: ad0: HARD READ ERROR blk# 14484670ad0: HARD READ ERROR blk# 14484670 status=59 error=40
Jan 23 17:12:44 ipv6-gw /kernel: ad0: DMA problem fallback to PIO mode
Jan 23 17:12:44 ipv6-gw /kernel: IPv6 packet filtering initialized, logging disabled
Jan 23 17:12:44 ipv6-gw /kernel: ad0: HARD READ ERROR blk# 14484670 status=59 error=40
Jan 23 17:12:44 ipv6-gw /kernel: ad0: HARD READ ERROR blk# 14484670 status=59 error=40


  Is there anyway to get rid of these problems? I've included the dmesg
output.

  Thanks for any help that anyone can give me.

  Geoff Crompton

--tThc/1wpZn/ma/RB
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=dmesg

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #0: Tue Jan 16 10:07:57 EST 2001
    root@ipv6-gw.eric.net.au:/usr/home/ghc/checkout/kame/freebsd4/sys/compile/P9KAME
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (735.00-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 134131712 (130988K bytes)
avail memory = 126230528 (123272K bytes)
Preloaded elf kernel "kernel" at 0xc0448000.
Pentium Pro MTRR support enabled
md0: Malloc disk
altq: major number is 96
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=1131)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva Vanta TNT2 graphics accelerator> at 0.0 irq 11
pcib2: <PCI to PCI bridge (vendor=8086 device=244e)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x1274, dev=0x5880) at 9.0
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xf3800000-0xf380007f irq 9 at device 11.0 on pci2
xl0: Ethernet address: 00:01:02:54:c2:4f
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xf3000000-0xf300007f irq 9 at device 12.0 on pci2
xl1: Ethernet address: 00:01:02:54:c2:4e
miibus1: <MII bus> on xl1
xlphy1: <3c905C 10/100 internal PHY> on miibus1
xlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=8086 device=2440)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xb800-0xb80f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 5 at device 31.2 on pci0
uhci0: (New UHCI DeviceId=0x24428086)
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: (0x24428086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 10
uhci1: <UHCI (generic) USB controller> port 0xb000-0xb01f irq 9 at device 31.4 on pci0
uhci1: (New UHCI DeviceId=0x24448086)
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: (0x24448086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub2: 4 ports with 4 removable, self powered
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, logging disabled
faith0 XXX: driver didn't set ifq_maxlen
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.8 initialized.  Default = pass all, Logging = enabled
ad0: 14594MB <ST315320A> [29651/16/63] at ata0-master UDMA66
acd0: CDROM <LTN485S> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s2a
ad0: HARD READ ERROR blk# 14484670ad0: HARD READ ERROR blk# 14484670 status=59 error=40
ad0: DMA problem fallback to PIO mode
IPv6 packet filtering initialized, logging disabled
ad0: HARD READ ERROR blk# 14484670 status=59 error=40
ad0: HARD READ ERROR blk# 14484670 status=59 error=40

--tThc/1wpZn/ma/RB--


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010123174558.A427>