Date: Thu, 12 Oct 2006 06:06:07 -0400 From: Daniel Eischen <eischen@vigrid.com> To: "M. Warner Losh" <imp@bsdimp.com> Cc: if@hetzner.co.za, current@freebsd.org Subject: Re: cardbus/xircom realport no longer works Message-ID: <452E138F.6010403@vigrid.com> In-Reply-To: <20061011.191342.01666242.imp@bsdimp.com> References: <E1GXdro-000Izw-QQ@hetzner.co.za> <20061011.191342.01666242.imp@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
M. Warner Losh wrote: > In message: <E1GXdro-000Izw-QQ@hetzner.co.za> > Ian FREISLICH <if@hetzner.co.za> writes: > : Hi > : > : After upgrading from 6.2-prerelease to current on one of my friend's > : laptops, the cardbus ethernet adaptor doesn't work any more. > : The card is one of those 2 slot thick Xircom RealPorts ethernet > : with a modem (red plastic connectors in the card). > : > : I can supply more information if required. (At least it works with > : my old 10M Accton pccard). > : > : FreeBSD 6.2-PRERELEASE #0: Mon Oct 9 08:36:57 UTC 2006 > : > : cbb0: <TI1225 PCI-CardBus Bridge> at device 3.0 on pci0 > : cardbus0: <CardBus bus> on cbb0 > : pccard0: <16-bit PCCard bus> on cbb0 > : cbb1: <TI1225 PCI-CardBus Bridge> at device 3.1 on pci0 > : cardbus1: <CardBus bus> on cbb1 > : pccard1: <16-bit PCCard bus> on cbb1 > : > : dc0: <Xircom X3201 10/100BaseTX> port 0x1000-0x107f mem 0x88000000-0x880007ff, 0x88001000-0x880017ff irq 11 at device 0.0 on cardbus0 > : miibus0: <MII bus> on dc0 > : tdkphy0: <TDK 78Q2120 media interface> on miibus0 > : tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > : dc0: Ethernet address: 00:10:a4:98:ff:b6 > : sio4: <Xircom Cardbus modem> port 0x1080-0x1087 mem 0x88002000-0x880027ff,0x88003000-0x880037ff at device 0.1 on cardbus0 > : sio4: type 16550A > : sio4: unable to activate interrupt in fast mode - using normal mode > : > : > : FreeBSD 7.0-CURRENT #1: Tue Oct 10 10:42:40 UTC 2006 > : > : cbb0: <TI1225 PCI-CardBus Bridge> at device 3.0 on pci0 > : cardbus0: <CardBus bus> on cbb0 > : pccard0: <16-bit PCCard bus> on cbb0 > : cbb1: <TI1225 PCI-CardBus Bridge> at device 3.1 on pci0 > : cardbus1: <CardBus bus> on cbb1 > : pccard1: <16-bit PCCard bus> on cbb1 > : > : cardbus0: CIS pointer is 0x107 > : cardbus0: CIS in option rom > : cardbus0: Unable to allocate resource to read CIS. > : cardbus0: Unable to allocate resources for CIS > : cardbus0: Warning: Bogus CIS ignored > : dc0: <Xircom X3201 10/100BaseTX> port 0x1000-0x107f mem 0x88000000-0x880007ff, 0x88001000-0x880017ff at device 0.0 on cardbus0 > : dc0: No station address in CIS! > : device_attach: dc0 attach returned 6 > : cardbus0: CIS pointer is 0x207 > : cardbus0: CIS in option rom > : cardbus0: Unable to allocate resource to read CIS. > : cardbus0: Unable to allocate resources for CIS > : cardbus0: Warning: Bogus CIS ignored > : sio4: <Xircom Cardbus modem> port 0x1000-0x1007 mem 0x88002000-0x880027ff,0x88003000-0x880037ff at device 0.1 on cardbus0 > : sio4: type 16550A > : sio4: [GIANT-LOCKED] > : sio4: unable to activate interrupt in fast mode - using normal mode > > This is defintiely weird.... I'll see if I can recreate it... I have the same problem on -current with my dc (Xircom) card and a Dell Inspiron laptop. It used to work (under -current) but hasn't worked in months. -- DE
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?452E138F.6010403>