Date: Wed, 14 Nov 2001 15:26:27 -0500 From: Scott Lambert <lambert@lambertfam.org> To: FreeBSD-Mobile@FreeBSD.org Cc: WATANABE Kiyoshi <aab10490@pop16.odn.ne.jp> Subject: Re: linmodem on freebsd Message-ID: <20011114152627.A538@laptop.lambertfam.org> In-Reply-To: <3BF25FE2.A7A64820@pop16.odn.ne.jp>; from aab10490@pop16.odn.ne.jp on Wed, Nov 14, 2001 at 11:13:22PM %2B0900 References: <3BEF1C33.ACDCABEA@pop16.odn.ne.jp> <20011113014012.A74305@laptop.lambertfam.org> <3BF11508.FD372F0@pop16.odn.ne.jp> <20011113134937.A21171@laptop.lambertfam.org> <3BF25FE2.A7A64820@pop16.odn.ne.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Nov 14, 2001 at 11:13:22PM +0900, WATANABE Kiyoshi wrote: > On Tue, 13 Nov 2001 13:49:37 -0500, Scott Lambert wrote: > > My problem now is that it always says NO DIALTONE when I try to make it dial. > > When you dial, can you hear DTMF tone from monitor speaker? Not from the laptop speakers or a telephone handset. I don't hear anything modem related on the laptop. > or can you hear the sound of RELAY which is connecting to the line? No. > 1. If you can't, the hardware is not working. Or the binary portion or the driver is not really telling the hardware to actually go off hook? As another point of data, I ran the local loopback tests with at&t1 for analog and at&t3 for digital. The digital test succeeded. The analog test apparently failed. I didn't have a loopback plug hooked in so, I'm not really sure if the analog test should have worked. > 2. If you can hear DTMF and still get "NO DIAL TONE", the interrupt handler > is not working properly. > > > Please try the followings. > > 1-1. If APM,ACPI,PNPBIOS or what is equivalent to these > is enabled in BIOS setting, disable it. In the BIOS, the only changable option is what appears to be the PNPOS YES/NO option. Of course, it is named differently. > 1-2. If "option PNPBIOS" is in your kernel configuration, > remove it and rebuild the kernel. PNPBIOS was not in my kernel config. I added it just to test. No change. > 2-1. If irq is shared with too many devices, change irq assignment. (if possible) All PCI devices, other than the IDE controllers, seem to be hard-wired to IRQ 11. > 2-2. Add the following line to /boot/loader.conf. Then reboot. Then test it. > > hw.ltmdm.intr="INTR_TYPE_NET" This didn't make any difference either. > > Should sysctl be reporting the vendor and device ids? > > These value is read from kernel environment variables and give parameters > for probe function. > > It is an experimental function. I wrote about this to work/kernel_env.txt in the > ltmdm-0.6-freebsd.tar.gz. ( sorry, it was written in Japanese. ) Ok, so they are used as a way to force attachment to a particular device at module load time? Then I won't worry about it anymore. -- Scott Lambert KC5MLE Unix SysAdmin -- Looking for work. lambert@lambertfam.org http://www.lambertfam.org/~lambert/resume.html 2.5 years Sr. SysAdmin experience with FreeBSD in small & medium size ISPs. The last 5 months have included exposure to Solaris 7, True64 5, and Linux. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011114152627.A538>