Date: Sun, 07 Dec 2003 07:39:12 -0700 From: Joseph Young <josyoun@nmt.edu> To: freebsd-questions@FreeBSD.ORG Subject: Trouble with USB and Visor on FreeBSD 4.9 Stable Message-ID: <1070807951.804.1.camel@msa-d5-a.rcn.nmt.edu>
next in thread | raw e-mail | index | archive | help
Currently, I'm using two USB devices, a Logitech Trackball and a
Handspring Visor. The trackball appears to work fine, but the Visor
does not. If I boot without the Visor attempting to sync, only the
mouse appears in the boot log; booting with the Visor attempting to
sync, displays both. After booting, in either case, usbdevs -dv shows
up blank, the trackball works correctly, but the Visor does not.
Further, if I attempt to hotsync, usbdevs -dv still appears blank.
Shouldn't usbdevs display both devices? Further, if it doesn't, how
can I check that FreeBSD is recognizing the devices?
Here are some different outputs to help:
$ uname -a
FreeBSD xxx.xxx.xxx.xxx 4.9-RELEASE FreeBSD 4.9-RELEASE #4: Sun Dec 7
03:39:19 MST 2003 root@xxx.xxx.xxx.xxx:/usr/obj/usr/src/sys/MYKERNEL
i386
$ dmesg (generated when asking the Visor to hotsync during boot;
otherwise, the Visor doesn't show up)
uhci0: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 11 at device
20.2 on p
ci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 11 at device
20.3 on p
ci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: Logitech Trackball, rev 1.10/2.20, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ucom0: Handspring Inc Handspring Visor, rev 1.00/1.00, addr 3
ucom0: Handspring Inc Handspring Visor, rev 1.00/1.00, addr 3
The kernel config (I've tried this w/ and w/o ohci):
# USB support
device uhci # UHCI PCI->USB interface
#device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ums # Mouse
# USB Com devices
device ucom
device uvisor
$ usbdevs -dv (Same regardless of whether the Visor is attempting to
hotsync)
Controller /dev/usb0:
addr 1: self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev
1.00
uhub0
port 1 powered
port 2 powered
usbd.conf (in case you're wondering, neither coldsync nor pilotlink are
working):
device "Handspring Visor"
devname "ugen[0-9]+"
vendor 0x082d
product 0x0100
release 0x0100
# attach "/usr/local/bin/coldsync -md -p /dev/${DEVNAME} -t usb"
#syncing
# attach "/usr/local/bin/coldsync -md -p /dev/${DEVNAME} -t usb
-f /usr/home/josyoun/.coldsyncrc"
#initalize
attach "/usr/local/bin/coldsync -mI -p /dev/${DEVNAME} -t usb -f
/usr/home/josyoun/.coldsyncrc"
#backup
# attach "/usr/local/bin/coldsync -mb /usr/home/josyoun/.palm -p
/dev/${DEVNAME} -t usb -f /usr/home/josyoun/.coldsyncrc"
device "Mouse"
devname "ums[0-9]+"
attach "/usr/sbin/moused -p /dev/${DEVNAME} -I
/var/run/moused.${DEVNAME}.pid ; /usr/sbin/vidcontrol -m on"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1070807951.804.1.camel>