Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 13 Feb 2015 17:09:36 +0100
From:      Luca Pizzamiglio <luca.pizzamiglio@gmail.com>
To:        freebsd-net@freebsd.org
Subject:   Fwd: pcie Realtek 8168G issues (re driver)
Message-ID:  <CAB88xy-17XDc69BRcX1xU46F0bb3hR9pBkG-AJmV9yyWML8_QQ@mail.gmail.com>
In-Reply-To: <CAB88xy9oCbq8s99bkWOAGptkH4vr2omsQqyLHrMNHAhtZDH-5g@mail.gmail.com>
References:  <CAB88xy9oCbq8s99bkWOAGptkH4vr2omsQqyLHrMNHAhtZDH-5g@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi, I'm Luca,

I've some issues using a PCIe Realtek Ethernet board:
re0@pci0:3:0:0: class=0x020000 card=0x012310ec chip=0x816810ec rev=0x0c hdr=0x00
    vendor     = 'Realtek Semiconductor Co., Ltd.'
    device     = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
    class      = network
    subclass   = ethernet
    bar   [10] = type I/O Port, range 32, base 0x1000, size 256, enabled
    bar   [18] = type Memory, range 64, base 0x90500000, size 4096, enabled
    bar   [20] = type Prefetchable Memory, range 64, base 0x90400000,
size 16384, enabled
    cap 01[40] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 05[50] = MSI supports 1 message, 64 bit
    cap 10[70] = PCI-Express 2 endpoint IRQ 1 max data 128(128) link x1(x1)
                 speed 2.5(2.5) ASPM disabled(L0s/L1)
    cap 11[b0] = MSI-X supports 4 messages
                 Table in map 0x20[0x0], PBA in map 0x20[0x800]
    cap 03[d0] = VPD
    ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
    ecap 0002[140] = VC 1 max VC0
    ecap 0003[160] = Serial 1 01000000684ce000
    ecap 0018[170] = LTR 1

Rx and Tx don't work. After some minutes the interface is activated I
get kernel panic.
I've already tried to disable MSIx and MSI.
It seems a DMA problem, rx fill the 256 descriptors and the nothing
else until the panic. netstat -s shows now new packets.

I filled a bug report with more infos:
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=197535

could someone kindly pointing some ideas?

Best regards,
Luca



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAB88xy-17XDc69BRcX1xU46F0bb3hR9pBkG-AJmV9yyWML8_QQ>