Date: Sun, 5 Aug 2001 10:55:47 -0500 From: Dave Uhring <duhring@charter.net> To: Jonathan Smith <jonsmith@dragonstar.dhs.org>, Carl Drougge <freebsd-stable@z42.net> Cc: Erik Rothwell <erothwell@callgtn.com>, stable@FreeBSD.ORG Subject: Re: ad2s1e: UDMA ICRC error reading fsbn... Message-ID: <01080510554700.13792@dave> In-Reply-To: <Pine.BSF.4.21.0108051043370.29112-100000@dragonstar.dhs.org> References: <Pine.BSF.4.21.0108051043370.29112-100000@dragonstar.dhs.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sunday 05 August 2001 10:46, Jonathan Smith wrote: > I just noticed something.... really odd.... > > > > ad2s1e: UDMA ICRC error reading fsbn 400447 of 200192-200447 > > > (ad2s1 > > ^^^^^^ ^^^^^^^^^^^^^ > > > > bn 400447; cn 397 tn 4 sn 19) retrying > > Is this an error in the error? Or is it really trying to red out of > range? > > j. > > -- > There is perhaps nothing quite as distressing as the unintended > consequences of well-intentioned government. > -- Attorney General John Ashcroft > > Jon Smith > > On Sun, 5 Aug 2001, Carl Drougge wrote: > > Date: Sun, 5 Aug 2001 17:40:13 +0200 > > From: Carl Drougge <freebsd-stable@z42.net> > > To: Erik Rothwell <erothwell@callgtn.com> > > Cc: stable@FreeBSD.ORG > > Subject: Re: ad2s1e: UDMA ICRC error reading fsbn... > > > > On Sun, Aug 05, 2001 at 03:24:25AM -0400, Erik Rothwell wrote: > > > I've recently added a new 40GB disk to my existing FreeBSD > > > system... It's been less than flawless ;) When I first went to > > > fdisk / disklabel the new drive, I got an error stating that the > > > drive geometry was improper... I let /stand/sysinstall pick its > > > own more suitable geometry and proceeded to newfs the drive, etc. > > > etc. Everything seems all well and good-- the new drive mounted > > > to /data... however, when I did a few tests moving data to the > > > new drive I get a *lot* of the following: > > > > > > ad2s1e: UDMA ICRC error reading fsbn 400447 of 200192-200447 > > > (ad2s1 bn 400447; cn 397 tn 4 sn 19) retrying > > > > [snip] > > > > > and so on... > > > > > > the file eventually transfers but its quite noisy... now, I'm > > > wondering if this is due to kernel settings or my UDMA > > > configuration-- or perhaps due to some hardware problem. > > > > I would say the cable. Or using UDMA66/UDMA100 on a 40 pin cable. > > (ICRC should be the CRC of the tranfer, if I guess correctly, which > > means the disk transfered the data correctly, but it didn't reach > > the controller correctly. Try forcing it to use a slower mode (not > > that I know how..).) > > The sector is within the range - at the very end of it. I had similar problems with an IBM-DTLA-305040 and sent it back to the dealer for replacement. The replacement drive did not give those errors. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01080510554700.13792>