Additional Diagnostic Information: 1 System will do intial boot from CD Rom player with CD Rom selected as = intial boot medium. Configuration is accomplished, all conflicts are = resolved. System starts reboot recognizes wcd0 and wcd1 controllers, = then freezes. 2. System will do intial boot from floopy selected as intial boot = medium. Configuration is accomplished, all conflicts are resolved. = System starts reboot recognizes wcd0 and wcd1 controllers, then freezes 3. CD-ROM player placed as slave on primary IDE controller. System = will do intial boot from CD Rom with CD Rom selected as intial boot = medium. Configuration is accomplished, all conflicts are resolved. = System starts reboot recognizes wcd0 and wcd1 controllers, then = freezes. 4. CD-ROM player placed as slave on primary IDE controller. System = will do intial boot from flloppy selected as intial boot medium. = Configuration is accomplished, all conflicts are resolved. System = starts reboot recognizes wcd0 and wcd1 controllers, then freezes. Help, what do I do next! I've gone through the FAQ's, searched the = Mailing List archives, and tried deciphering the ATAPIA source code with = no luck. I've run out of ideas. I'm sure that someone must have = encountered this problem somewhere. As a last resort I could try a DOS = installation, but that still leaves the problem of an unrecognized CD = ROM player to fix. I really DON"T want to go back to Linux :( Regds =20 Mark Hartong =20 hartong@erols.com mark.hartong@lmco.com ------=_NextPart_000_0008_01BD8CAE.84F52B60 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

HELP!!!!!

While installing FreeBSD 2.2.6 I I = obtain the=20 following:

The system locks up with the dreaded blue screen of=20 death on virtual console 1 with "Probing devices, Please=20 wait..."

Diagnostic message on=20 virtual console 2

ATAPI.IO: INVALID COMMAND PHASE,=20 IREASON=3D0xd8,STATUS=3Dd8<BUSY,READY,OPDONE,IRQ>,=20 ERROR=3Dd8<mchg>

Hardware Configuration: = NEC CD-Rom Drive 273, running as master on = secondary IDE=20 controller 1GB HD running as master on primary IDE = controller. =20 System is a Dell Dimension P133. <All in all a relatively=20 "standard" equipment and configuration, I = think>

Additional Diagnostic = Information:

1 System will do intial boot = from CD Rom=20 player with CD Rom selected as intial boot medium. Configuration = is=20 accomplished, all conflicts are resolved. System starts = reboot =20 recognizes wcd0 and wcd1 controllers, then freezes.

2. System will do intial boot = from floopy=20 selected as intial boot medium. Configuration is accomplished, all = conflicts are resolved. System starts reboot recognizes wcd0 = and=20 wcd1 controllers, then freezes

3. CD-ROM player placed as = slave on=20 primary IDE controller. System will do intial boot from CD Rom = with CD Rom=20 selected as intial boot medium. Configuration is accomplished, all = conflicts are resolved. System starts reboot recognizes wcd0 = and=20 wcd1 controllers, then freezes.

4. CD-ROM player placed = as slave on=20 primary IDE controller. System will do intial boot from flloppy = selected=20 as intial boot medium. Configuration is accomplished, all = conflicts are=20 resolved. System starts reboot recognizes wcd0 and wcd1 = controllers,=20 then freezes.

Help, what do I do next! I've = gone through=20 the FAQ's, searched the Mailing List archives, and tried deciphering the = ATAPIA=20 source code with no luck. I've run out of ideas. I'm sure = that=20 someone must have encountered this problem somewhere. As a last = resort I=20 could try a DOS installation, but that still leaves the problem of an=20 unrecognized CD ROM player to fix. I really = DON"T=20 want to go back to Linux :(

Regds

Mark Hartong

hartong@erols.com

mark.hartong@lmco.com

------=_NextPart_000_0008_01BD8CAE.84F52B60-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message