Date: Sat, 22 Apr 1995 23:51:19 -0700 (PDT) From: "Rodney W. Grimes" <rgrimes@gndrsh.aac.dev.com> To: faulkner@mpd.tandem.com (Boyd Faulkner) Cc: current@FreeBSD.org Subject: Re: Problem booting SNAP floppy on PCI/I-486SP3G Message-ID: <199504230651.XAA03319@gndrsh.aac.dev.com> In-Reply-To: <9504222109.AA03643@olympus> from "Boyd Faulkner" at Apr 22, 95 04:09:20 pm
next in thread | previous in thread | raw e-mail | index | archive | help
> > Rod, > My 486 PCI Asus Box boots FreeBSD current great... but the latest snap > boot floppy and the fixit disk do not. Everthing is cool until the PCI > is found. > > Apr 22 15:05:09 catburg /kernel: Probing for devices on the pci0 bus: > Apr 22 15:05:10 catburg /kernel: configuration mode 2 allows 16 devices. > Apr 22 15:05:10 catburg /kernel: chip0 <Intel 82424ZX cache DRAM controller> > rev 4 on pci0:0 > Apr 22 15:05:10 catburg /kernel: ncr0 <ncr 53c810 scsi> rev 2 int a irq 9 on > pci 0:1 > Apr 22 15:05:10 catburg /kernel: reg20: virtual=0xf2fe9000 > physical=0xfbf ef000 size=0x100 > > Up to here life is good, but the following never happens from floppy. > > Apr 22 15:05:10 catburg /kernel: ncr0: restart (scsi reset). > Apr 22 15:05:10 catburg /kernel: ncr0 scanning for targets 0..6 > (V2 pl21 95/03/21) > > I have waited over a minute. > > Seen this before? I tried all my boards here, and every one of them works. I will bring in a PCI/I-486SP3G this week and see if I can track this down. You mention that this works with a -current kernel, what happens if you put that kernel on floppy? Or if you copy the floppy kernel to hard disk as /kernel.flp and try to boot it? -- Rod Grimes rgrimes@gndrsh.aac.dev.com Accurate Automation Company Custom computers for FreeBSD
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199504230651.XAA03319>