From owner-freebsd-current Thu May 2 19:36:33 1996 Return-Path: owner-current Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id TAA14527 for current-outgoing; Thu, 2 May 1996 19:36:33 -0700 (PDT) Received: from luke.pmr.com (luke.pmr.com [206.224.65.132]) by freefall.freebsd.org (8.7.3/8.7.3) with ESMTP id TAA14519 for ; Thu, 2 May 1996 19:36:22 -0700 (PDT) Received: (from bob@localhost) by luke.pmr.com (8.7.5/8.6.9) id VAA13228 for freebsd-current@freefall.cdrom.com; Thu, 2 May 1996 21:36:28 -0500 (CDT) From: Bob Willcox Message-Id: <199605030236.VAA13228@luke.pmr.com> Subject: ahc driver no longer sees one of my disks To: freebsd-current@freefall.FreeBSD.org (freebsd-current) Date: Thu, 2 May 1996 21:36:28 -0500 (CDT) X-Mailer: ELM [version 2.4ME+ PL11 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-current@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Since replacing my 100MHz Pentium CPU with a 166MHz CPU, the Adaptec 2940 device driver no longer sees one of my SCSI disks, my Toshiba 3701 CDROM, or my Wangtek 5525ES tape drive (the adapter's BIOS does). What I use to get (before the CPU change) for boot output was: ahc0 rev 3 int a irq 12 on pci0:10 ahc0: aic7870 Single Channel, SCSI Id=7, 16 SCBs ahc0 waiting for scsi devices to settle ahc0: target 0 Tagged Queuing Device (ahc0:0:0): "QUANTUM PD700S 3110" type 0 fixed SCSI 2 sd0(ahc0:0:0): Direct-Access 668MB (1368432 512 byte sectors) ahc0: target 1 Tagged Queuing Device (ahc0:1:0): "DEC DSP3105S X385" type 0 fixed SCSI 2 sd1(ahc0:1:0): Direct-Access 1001MB (2050860 512 byte sectors) ahc0: target 3 Tagged Queuing Device (ahc0:3:0): "COMPAQPC DPES-31080 S31K" type 0 fixed SCSI 2 sd2(ahc0:3:0): Direct-Access 1001MB (2051000 512 byte sectors) (ahc0:4:0): "TOSHIBA CD-ROM XM-3701TA 2965" type 5 removable SCSI 2 cd0(ahc0:4:0): CD-ROM cd present [232695 x 2048 byte records] (ahc0:6:0): "WANGTEK 5525ES SCSI REV7 3R4" type 1 removable SCSI 1 st0(ahc0:6:0): Sequential-Access density code 0x0, drive empty After changing the CPU I now get: ahc0 rev 3 int a irq 12 on pci0:10 ahc0: aic7870 Single Channel, SCSI Id=7, 16 SCBs ahc0 waiting for scsi devices to settle ahc0: target 0 Tagged Queuing Device (ahc0:0:0): "QUANTUM PD700S 3110" type 0 fixed SCSI 2 sd0(ahc0:0:0): Direct-Access 668MB (1368432 512 byte sectors) ahc0: target 1 Tagged Queuing Device (ahc0:1:0): "DEC DSP3105S X385" type 0 fixed SCSI 2 sd1(ahc0:1:0): Direct-Access 1001MB (2050860 512 byte sectors) Note that I rebuilt my kernel with tagged queuing disabled but that had no effect. Its as though the adapter stops scanning the bus once it hits my third disk drive (this is an OEM IBM drive apparently originally sold by Compac). Also, *one* time since the CPU change the 3rd disk was detected. Here is what the output from that time was: ahc0 rev 3 int a irq 12 on pci0:10 ahc0: aic7870 Single Channel, SCSI Id=7, 16 SCBs ahc0 waiting for scsi devices to settle ahc0: target 0 Tagged Queuing Device (ahc0:0:0): "QUANTUM PD700S 3110" type 0 fixed SCSI 2 sd0(ahc0:0:0): Direct-Access 668MB (1368432 512 byte sectors) ahc0: target 1 Tagged Queuing Device (ahc0:1:0): "DEC DSP3105S X385" type 0 fixed SCSI 2 sd1(ahc0:1:0): Direct-Access 1001MB (2050860 512 byte sectors) ahc0: target 3 Tagged Queuing Device (ahc0:3:0): "COMPAQPC DPES-31080 S31K" type 0 fixed SCSI 2 sd2(ahc0:3:0): Direct-Access sd2(ahc0:3:0): UNIT ATTENTION asc:29,0 sd2(ahc0:3:0): Power on, reset, or bus device reset occurred , retries:4 1001MB (2051000 512 byte sectors) (ahc0:4:0): "TOSHIBA CD-ROM XM-3701TA 2965" type 5 removable SCSI 2 cd0(ahc0:4:0): CD-ROM cd present [232695 x 2048 byte records] Notice the UNIT ATTENTION for the drive this time, and that the CDROM drive was detected but not the tape drive (still). Any suggestions, help, ideas?? Thanks, -- Bob Willcox bob@luke.pmr.com Austin, TX