Date: Fri, 20 Jul 2012 16:02:04 +1000 From: John Marshall <john.marshall@riverwillow.com.au> To: freebsd-stable@freebsd.org Subject: Re: Thinkpad X61s cannot boot 9.1-BETA1 Message-ID: <20120720060204.GB7331@rwpc15.mby.riverwillow.net.au> In-Reply-To: <5007CFE6.6030808@intersonic.se> References: <5007CFE6.6030808@intersonic.se>
next in thread | previous in thread | raw e-mail | index | archive | help
--mxv5cy4qt+RJ9ypb
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
On Thu, 19 Jul 2012, 11:14 +0200, Per olof Ljungmark wrote:
> Did anyone else experience this? With 9.1-BETA1 the boot process=20
> freezes, among the last lines with verbose boot are
>=20
> acpi_acad0: On Line
> acpi_acad0: acline initialization done, tried 1 times
>=20
> after this, dead.
>=20
> What is supposed to happen in the next stage?
> This laptop worked fine with 9-STABLE to at least february.
This morning I csup'd RELENG_9, built, and upgraded my ThinkPad T43 from
9.0-RELEASE-p3 with no problem. See dmesg output below. I do realize
that a ThinkPad T43 is not a ThinkPad X61 but, not knowing how similar
or different they may be, I thought I'd post a reply anyway. My kernel
config includes the following two drivers which may be relevant
(particularly acpi_ibm): they have been in the config for a number of
years.
device acpi_ibm
device acpi_video
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-PRERELEASE #0: Fri Jul 20 11:55:58 AEST 2012
root@rwpc08:/usr/obj/build/src/sys/RWPC08 i386
CPU: Intel(R) Pentium(R) M processor 1.73GHz (1729.21-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x6d8 Family =3D 6 Model =3D d Stepp=
ing =3D 8
Features=3D0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=3D0x180<EST,TM2>
AMD Features=3D0x100000<NX>
real memory =3D 1610612736 (1536 MB)
avail memory =3D 1555107840 (1483 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <IBM TP-70 >
ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20110527/tbfadt-55=
6)
ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000=
000000102C/0x0 (20110527/tbfadt-586)
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
cryptosoft0: <software crypto> on motherboard
acpi0: <IBM TP-70> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 5ff00000 (3) failed
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0x90080000-0x900ff=
fff,0xb0000000-0xbfffffff,0x90000000-0x9003ffff irq 16 at device 2.0 on pci0
acpi_video0: <ACPI video extension> on vgapci0
agp0: <Intel 82915GM (915GM GMCH) SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 7932k stolen memory
drm0: <Intel i915GM> on vgapci0
info: [drm] AGP at 0xb0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
vgapci1: <VGA-compatible display> at device 2.1 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004101> =
mem 0x90100000-0x9010ffff irq 16 at device 0.0 on pci2
bge0: CHIP ID 0x00004101; ASIC REV 0x04; CHIP REV 0x41; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000ba=
seT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:11:25:d2:38:06
pcib2: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib2
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1820-0x=
183f irq 16 at device 29.0 on pci0
usbus0 on uhci0
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1840-0x=
185f irq 17 at device 29.1 on pci0
usbus1 on uhci1
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1860-0x=
187f irq 18 at device 29.2 on pci0
usbus2 on uhci2
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1880-0x=
189f irq 19 at device 29.3 on pci0
usbus3 on uhci3
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0x90040000-0x900403ff =
irq 19 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib3
cbb0: <TI1510 PCI-CardBus Bridge> mem 0x90300000-0x90300fff irq 16 at devic=
e 0.0 on pci4
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0x90301000-0x90301fff irq 21 at de=
vice 2.0 on pci4
pcm0: <Intel ICH6 (82801FB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0x9004080=
0-0x900409ff,0x90040400-0x900404ff irq 22 at device 30.2 on pci0
pcm0: <Analog Devices AD1981B AC97 Codec>
pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6M SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x17=
7,0x376,0x1810-0x181f at device 31.2 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
ichsmb0: <Intel 82801FB (ICH6) SMBus controller> port 0x18a0-0x18bf irq 23 =
at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on=
acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: <Parallel port> port 0x3bc-0x3be irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0
ichwd0 on isa0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd1000-0xd1fff,0xdc000-0xdffff,0xe0000-0x=
effff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <ST910021A 3.07> ATA-7 device
ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
ada0: 95396MB (195371568 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ-822S 1.61> Removable CD-ROM SCSI-0 device=20
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ugen4.2: <vendor 0x04b3> at usbus4
uhub5: <vendor 0x04b3 product 0x4482, class 9/0, rev 2.00/0.00, addr 2> on =
usbus4
uhub5: MTT enabled
Root mount waiting for: usbus4
uhub5: 4 ports with 4 removable, self powered
Trying to mount root from ufs:/dev/gpt/ROOT [rw,noatime]...
ugen4.3: <vendor 0x10d5> at usbus4
ukbd0: <vendor 0x10d5 KVM A1, class 0/0, rev 1.10/0.00, addr 3> on usbus4
kbd2 at ukbd0
ums0: <vendor 0x10d5 KVM A1, class 0/0, rev 1.10/0.00, addr 3> on usbus4
ums0: 5 buttons and [XYZ] coordinates ID=3D1
ugen2.2: <STMicroelectronics> at usbus2
wlan0: Ethernet address: 00:12:f0:c2:87:e8
--=20
John Marshall
--mxv5cy4qt+RJ9ypb
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (FreeBSD)
iEUEARECAAYFAlAI9FwACgkQw/tAaKKahKLHdACfXYIZ/n6NhrIEIkQ+DNOH0xVO
kJMAl1rYyLfEbUS5wg39RXg0H/fLi08=
=ZiiF
-----END PGP SIGNATURE-----
--mxv5cy4qt+RJ9ypb--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120720060204.GB7331>