Date: Sun, 19 Apr 2015 16:31:45 -0300 From: Luiz Otavio O Souza <lists.br@gmail.com> To: Ralf Wenk <iz-rpi03@hs-karlsruhe.de> Cc: "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org> Subject: Re: Raspberry Pi B+ freeze during booting (new: r281074 causing it) Message-ID: <CAB=2f8y-9PRj56PPzAa-_vre86MAe3Xhhfyf=yju2hj89sYhfA@mail.gmail.com> In-Reply-To: <E1YjuBs-004cg6-OO@smtp.hs-karlsruhe.de> References: <E1YiMSu-00AywE-9U@smtp.hs-karlsruhe.de> <E1YjuBs-004cg6-OO@smtp.hs-karlsruhe.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On 19 April 2015 at 15:43, Ralf Wenk wrote: > Hello, > > I wrote at Wed, 15 Apr 2015 14:30:48 +0200: >> with r281139 my RPi freeze while booting. The last two lines logged >> are always the same and belong to the ethernet interface. >> >> ue0: <USB Ethernet> on smsc0 >> ue0: Ethernet address: b8:eb:71:8a:6d:0b >> >> [...] > > the last revision which kernel boots here successful is 281073. > Release 281074 is the first one which shows the described problem. > > I tried to break into the kernel debugger or booted with verbose mode > turned on to get more information. Unfortunately without any success. > > The log entry of release 281074 says > > Remove the extra copy of uart_fdt_get_clock and uart_fdt_get_shift. > While here also use OF_getencprop in uart_fdt_get_clock. > > > As I am using the boot console on serial port I am using a slightly > changed kernel configuration (RPI-Bsc) with > > #device vt > #device kbdmux > #device ukbd > > commented as suggested in the default kernel configuration (RPI-B). > > > Any suggestions what to do? > > Some ideas: > - r281074 changes OF_getprop into OF_getencprop uart_cpu_fdt.c should I > reverse it and give it a try? > > - Also the extra copy of uart_fdt_get_clock() in uart_bus_fdt.c contained > the line > *cell = fdt32_to_cpu(clock); > just before the return(0); uart_fdt_get_clock() in uart_cpu_fdt.c > r281073 contained it as well, but it was deleted in r281074. > Was this statement useless? > > Ralf Hi, This issue was fixed on r281200 Regards, Luiz
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAB=2f8y-9PRj56PPzAa-_vre86MAe3Xhhfyf=yju2hj89sYhfA>