Date: Thu, 22 Apr 1999 16:17:06 -0400 From: "Rick Whitesel" <rwhitesel@nbase-xyplex.com> To: <current@FreeBSD.ORG> Subject: New IDE drivers problem Message-ID: <000701be8cfd$188f1f80$d3e4b38c@xyplex.com>
next in thread | raw e-mail | index | archive | help
Hi:
As I had stated earlier, the new IDE drivers broke on me yesterday.
I have done some investigation and discovered that the ATA driver no longer
believes I have any devices on ata1 (I think!). I have included the dmesg
text. Any help in solving the problem would be greatly appreciated.
Rick Whitesel
Scientist
NBase-Xyplex
rwhitesel@nbase-xyplex.com
"They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety."
-- Benjamin Franklin, 1759
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #5: Thu Apr 22 16:05:29 EDT 1999
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping=2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,MMX,FXSR>
real memory = 268435456 (262144K bytes)
avail memory = 258252800 (252200K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc031b000.
Pentium Pro MTRR support enabled, default memory type is uncacheable
Probing for PnP devices:
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <PCI host bus adapter> on motherboard
pci0: <PCI bus> on pcib0
chip0: <Intel 82443BX host to PCI bridge> at device 0.0 on pci0
chip1: <Intel 82443BX host to AGP bridge> at device 1.0 on pci0
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
ata-pci0: <Intel PIIX4 IDE controller> at device 4.1 on pci0
ata-pci0: type=71118086 class=01 subclass=01 cmd=02800005
ata-pci0: Busmastering DMA supported
ata0: iobase=0x01f0 altiobase=0x03f6
ata0: mask=03 status0=50 status1=00
ata0: mask=03 status0=50 status1=00
ata0: devices = 0x1
ata0 at 0x01f0 irq 14 on ata-pci0
ata1: iobase=0x0170 altiobase=0x0376
ata1: mask=03 status0=a5 status1=50
ata1: mask=03 status0=50 status1=50
ata1: devices = 0x0
chip2: <Intel 82371AB Power management controller> at device 4.3 on pci0
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> at device 6.0 on pci0
ahc0: interrupting at irq 19
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> at device 9.0 on pci0
fxp0: interrupting at irq 19
fxp0: Ethernet address 00:a0:c9:b7:be:e9
fxp1: <Intel EtherExpress Pro 10/100B Ethernet> at device 10.0 on pci0
fxp1: interrupting at irq 18
fxp1: Ethernet address 00:a0:c9:b7:bf:5f
hea0: <Efficient ENI ATM Adapter> at device 11.0 on pci0
hea0: interrupting at irq 17
isa0: <ISA bus> on motherboard
fdc0: interrupting at irq 6
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
atkbdc0: <keyboard controller (i8042)> at port 0x60 on isa0
atkbd0: <AT Keyboard> on atkbdc0
atkbd0: interrupting at irq 1
psm0: <PS/2 Mouse> on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
psm0: interrupting at irq 12
vga0: <Generic ISA VGA> on isa0
sc0: <System console> on isa0
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio0: interrupting at irq 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: interrupting at irq 3
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0 at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppc0: interrupting at irq 7
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
ds0 XXX: driver didn't set ifq_maxlen
SMP: AP CPU #1 Launched!
ata0: master: settting up UDMA2 mode on PIIX4 chip OK
ad0: <IBM-DTTA-371440/T71OA73A> ATA-4 disk at ata0 as master
ad0: 13783MB (28229040 sectors), 28005 cyls, 16 heads, 63 S/T, 512 B/S
ad0: piomode=4, dmamode=2, udmamode=2
ad0: 16 secs/int, 31 depth queue, DMA mode
Waiting 5 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 6 lun 0
sa0: <CONNER CTMS 3200 7.00> Removable Sequential Access SCSI-2 device
sa0: 5.000MB/s transfers (5.000MHz, offset 15)
changing root device to wd0s1a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000701be8cfd$188f1f80$d3e4b38c>